Cabling The Complete Guide To Copper And Fiber Optic Networking 4 Edition

  • Premium Essay

    Practice Activity 2: Cabling – Definitions

    PRACTICE Activity 2: Cabling – Definitions In-Class Activity, Graded Description: The goal of this activity is to learn the basic terminology used in copper and fiber cabling. It builds a strong foundation and allows everyone to speak the same language when discussing topics in this course. Give students a few minutes to review the chapters, looking for key terms. Divide the class into two teams. Read the definition and have the teams race to the board to write the correct term. At

    Words: 509 - Pages: 3

  • Free Essay

    Cabling Notes

    travel in water -33502mph | Cabling Notes 6/20/12 Name three rules of Data cabling 1. Networks never get smaller or less complicated. 2. Don’t scrimp on installation cost. Quality components and cable must be installed, No poor workmanship allowed. 3. Plan for higher –speeds technologies than are commonly available today. Just because 1000Base-TEthernet seems unnecessary today doesn’t mean in five years you will need to use it. The cost of poor cabling – The cost that results from

    Words: 910 - Pages: 4

  • Free Essay

    Lab9 Cabling

    the networking and infrastructure components quoted throughout this agreement and can show proof thereof. The work will be supervised by a Registered Communications Distribution Designer (RCDD) during all phases of the installation. An RCDD must be onsite and available to technicians and installers any time the work is being performed. The purpose of this RFP is to provide a functional specification for the comprehensive technology network system. This includes the required network cabling, termination

    Words: 1246 - Pages: 5

  • Free Essay

    Fiber Optics vs Led

    Fiber optic light sources must be able to turn on and off millions to billions of times per second while projecting a nearly microscopic beam of light into an optical fiber. Both Light Emitting Diodes and Laser transmitters are considered to be semiconductor light sources. However, they differ greatly in output patterns. Forward biased LEDs generate light when positive voltage is applied to the “p” region and negative voltage is applied to the “n” region of the diode. Random photons are emitted

    Words: 563 - Pages: 3

  • Free Essay

    Copper Versus Fiber

    Copper vs. fiber Everyone building a network must face this question at some point: fiber or copper wiring? For a usual home network or even a big office either one will suffice but what is the best option for you or your company. You have to take cost, distance of cabling, and bandwidth and speed into consideration when making this choice. Copper: a traditional copper wiring for a network certainly seems much cheaper on the surface. Copper wiring itself is dirt cheap at least comparatively

    Words: 506 - Pages: 3

  • Premium Essay

    Introduction to Networking Final Exam Study Guide

    Final Exam Study Guide 1. Byte- 8 bits 2. Truth Table? 1=yes 0=no 3. Parentheses of math equation 4. Node on a network? A generic term for any networking device that sits on the end of links, for the purpose of both connection links to create physical paths and to make decisions about how to forward data through the network 5. Topology-bus 6. Identify protocol and web address Protocol- set of rules that different devices and/or software must follow so that the network

    Words: 1388 - Pages: 6

  • Free Essay

    Assignment 1. Copper vs. Fiber

    10/20/2012 NT1310 – Unit 4. Assignment 1 – Copper vs. Fiber The copper phone wire has very limited bandwidth. It was designed to provide 3,000Hz bandwidth, perfectly adequate for a voice signal. Fiber links offer over 1,000 times more bandwidth capacity and can be carried over 100 times the distance than copper can. The chart pictured here shows the specific advantages Fiber has over copper wiring in regards to bandwidth and distance. When it comes to LANs or premises cabling, a lot of controversy

    Words: 628 - Pages: 3

  • Premium Essay

    Fiber Optic Cable Design

    2013 Before you can begin to design a fiber optic cable design, one needs to establish with the user or network owner where the network will be built and what communications signals it will carry. (LANs or Local area network)And security systems use structure cabling systems built around well-defined industry Standards. Many campus carry backbone network used in industrial complexes or Institutions uses as long as 500 m or more cabling requiring optical fiber. Telephone networks are mainly outside

    Words: 410 - Pages: 2

  • Free Essay

    Contrast of Copper and Fiber Optics

    NT1310 07/08/2013 Assignment 4 Contrast of Copper and Fiber Optics: Copper has been used in electric wiring since the invention of the electromagnet and the telegraph in the 1820s. The invention of the telephone in 1876 created further demand for copper wire as an electrical conductor. Copper wires in a cable may be bare or they may be plated to reduce oxidation with a thin layer of another metal, most often tin but sometimes gold or silver. Plating may lengthen wire

    Words: 833 - Pages: 4

  • Premium Essay

    Copper vs Fiber

    trying to decide between copper and fiber cabling, there are several things to think about for which one best will fit your needs. A few things you will need to take into consideration when making your decision are what do you need your cable to be capable of, how far do you need your cable to run from point to point, what is your budget, and always think about the future with room to expand your business. Both copper and fiber cabling have pros and cons. Copper cabling has been around ever since

    Words: 522 - Pages: 3

  • Free Essay

    Copper Versus Fiber

    Edward Taylor 00957058 Copper vs. Fiber There are two main forms of cable used in telecommunications, copper wire and fiber optic cable. Copper is a much more popular choice in most networking situations due to its inexpensive sticker price. Copper wire does pose certain issues that the more expensive and delicate counterpart does not. There is also a huge difference between the two cable types when it comes to performance and bandwidth. Copper wire is most commonly used in network construction

    Words: 408 - Pages: 2

  • Premium Essay

    Cabling Definitions Unit 4

    between telecommunications outlet and the horizontal cross-connect Backbone Cable – cable between telecommunications and equipment room Patch Cord – cable between network device and main cable run or outlet Connectors – device attached to end of “cabling” that attaches to another Conduit – section in which cables are housed for protection Racks – frame where panels, switches, and other equipment are installed Punch-Down Blocks – cross connect block where the wires are placed into a terminal groove

    Words: 304 - Pages: 2

  • Free Essay

    Copper vs. Fiber

    Copper vs. Fiber They are two major types of cables used in networking, copper and fiber. Each cable are used in different application regarding to its usage. They also have different strengths cause of the material they are made of. Copper is the most common out of the two cables. Not as powerful as Fiber, but are ideal for buildings up to 100m. Fiber is mostly used for longer distances that copper can’t reach. For example, Fiber is ideal for high-rise buildings. Both cables do have their

    Words: 296 - Pages: 2

  • Free Essay

    Fiber Optic Networking: Macro or Micro?

    Fiber Optic Networking: Macro or Micro? Clinton Baxter GS1145 Strategies for the Technical Professional Technology is always changing; this whole world revolves around technology anymore. One of the quickest changing pieces of technology is the internet and the cables used to provide you with that internet. We have all moved into the dawn of the newest type of internet connection and cables called fiber optic. These cables are used for very high bandwidth of network connection (Mitchell, n

    Words: 386 - Pages: 2

  • Free Essay

    Chapter 4 Lab Intro to Networking

    Lab Chapter 4 4.1.1 Exercise: Standards are important for NIC, Connectors and Media, because of the Stability, Consistency, and Minimization of packet errors. 4.1.2 Exercise: Why is it so low when the capacity for transmission electricity on the copper wire is so high? Because, due to truncation on the transmission of voltage with an electric current. 4,1,3 Exercise: It’s used in the Healthcare facilities, because it’s more fire resistance. 4.1.4 Exercise: Category | Maximum Speed | Application

    Words: 358 - Pages: 2

  • Premium Essay

    Introduction of Fiber Optic

    Learn Making sense out of complex Pro A/V and Broadcast technologies. edu Guide An educational resource published by Communications Specialties, Inc.. Introduction to Fiber Optics The equipment, tools and cabling that comprise a fiber optic link, how they work and their advantages over traditional copper. commspecial.com edu Guide Communications Specialties, Inc. is committed to increased education and knowledge in the Pro A/V and Broadcast industries. We hope that you

    Words: 5977 - Pages: 24

  • Premium Essay

    Cabling and Fiber Optic

    communicate over vast distance that the system was not designed for. An example of this is, if the equipment or cable becomes damaged or the antenna becomes blocked. References Oliviero, A., & Woodward, B. (2011). Cabling: The Complete Guide to Copper and Fiber-Optic Networking (4th ed.). http://micro.magnet.fsu.edu/primer/lightandcolor/reflectionintro.html

    Words: 356 - Pages: 2

  • Premium Essay

    Networking Cables

    successful network. There's a lot of different type of cabling in today's networks and I am not going to cover all of them, but I will be talking about the most common cables, which include UTP CAT5 straight through and crossover, coax and a few more. Twisted pair is the ordinary copper wire that connects home and many business computers to the telephone company. To reduce crosstalk or electromagnetic induction between pairs of wires, two insulated copper wires are twisted around each other. Each connection

    Words: 1515 - Pages: 7

  • Free Essay

    Physical Netowrking- Fiber Optic Installation

    for sure and require protection. Tray installation would be for when cables would need to be changed more frequently and does not require being underground. There are three types of installations for cables and they are direct, aerial and blown fiber installations. Direct burial is cable which is buried directly underground. It does not need any special covering or pipe to be buried. This type of cable is less expensive and easier to burry but the downfall is it can be easily cut during a dig.

    Words: 467 - Pages: 2

  • Premium Essay

    Copper vs Fiber Papaer

    Computers and Technology Copper vs Fiber In: Computers and Technology Copper vs Fiber Copper vs. Fiber Paper In putting in a network there are many aspects to consider such as the Topology or design, what type of hardware to be used, and types of cabling. Copper cables are the norm when it comes to building and network and widely used in our communications of today. Copper has been used in electric wiring since the invention of the electromagnet. Copper and its alloys are also used

    Words: 280 - Pages: 2

  • Free Essay

    Copper and Fiber

    Copper vs Fiber These two forms of cabling are mostly used in the world today and it is up to the location to decide which cable is best. They both have their strengths and weakness; I am going to shed some light on these two cables. Copper gives you the ability to power phones, surveillance cameras, Wireless Access Points, and many other devices right through the networking cable, meaning that you don’t have to schedule an appointment with an electrician in to run power to your surveillance

    Words: 362 - Pages: 2

  • Free Essay

    Copper Cabling vs. Fiber Optic Cabling

    Copper Cabling vs. Fiber Optic cabling The most commonly used copper cables are Cat5e and Cat6. Cat5e cabling is able to support applications requiring bandwidth up to 100MHz and is also offered in a shielded version to prevent interference. Cat6 cabling supports applications requiring bandwidth up to 250MHz and is also available in a shielded version. Also Cat6 cabling is designed to support 1000Base-T (Gigabit Ethernet) (Oliviero, 2010). However, as cost efficient as copper cabling is compared

    Words: 520 - Pages: 3

  • Free Essay

    Fiber Optic Patch Cables

    electronic and fiber optic connectors, interconnect systems, coaxial, and specialty cables to various customers, ranging from large multi-billion dollar OEMs to consumers. At Amphenol Cables on Demand™ (ACD), we guarantee our interconnect products to be of the highest quality as demanded by our largest OEM customers. Only premium materials and quality engineering are used in the design and manufacturing of our Amphenol Cables on Demand™ product offerings. Fiber Optic Patch Cables Fiber Optic Patch

    Words: 427 - Pages: 2

  • Free Essay

    Fiber Optics

    following materials: patch cables, cat 6 cables, fiber optic multi-mode, cable trays, Cisco- WS-C3750 G24PS-S 24 Ports, laser printer, vertical runs, computers, Cisco border router, server run a and server run b. The following codes must be in play to ensure the building or work space is safe for everyone. 1. American National Standards Institute (ANSI). 2. Electronic Industries Alliance (EIA) 3. Telecommunications Industry Association (TIA) 4. Insulated Cable Engineers Association (ICEA) 5

    Words: 1121 - Pages: 5

  • Free Essay

    Copper vs Fiber Optic

    Unit 4. Assignment 1. Copper vs. Fiber Paper Copper (Ethernet) Cable * Ethernet cables are vulnerable to electromagnetic interference because they work through electrical signals. * Due to the way in which data is transmitted across Ethernet copper cabling, it is vulnerable to being intercepted. * Ethernet offers less bandwidth. Ethernet can provide data transfer speeds of up to 1000Mbps, but through the use of Cat 6 cables it can support data transfer rates of up to 10Gbps. * There

    Words: 814 - Pages: 4

  • Free Essay

    Copper vs Fiber

    Copper vs. Fiber Category 6 cable: Cat 6, is a standardized cable for Gigabit Ethernet and other network physical layers that is backward compatible with the Category 5/5e and Category 3 cable standards. Advantages • Speed and Performance • Similar Structure with Cat 5 Cable • Backward Compatible • Upgradable Disadvantages • Expensive • Does Not Guarantee Full Speed Fiber Optic Cable: This is a cable made up of super-thin filaments of glass or other transparent materials that can carry

    Words: 262 - Pages: 2

  • Premium Essay

    Wired Networking, Wireless Networking

    NETWORKING Victor P. Mangulabnan Director, Professional Services Division FYI… Ø  1 DAY TRAINING (Informal) Ø  BREAK – Lunch Ø  Mobile Phone – Off or Silent Mode Ø  Raise a hand if there’s a question Ø  Introduce yourself NETWORKING Group of Computers connected together by cables or some other medium. Is a connection of two or more components that gives people the ability to share software, peripheral devices, communicate with each other and share processing power. IS ALL ABOUT

    Words: 2163 - Pages: 9

  • Free Essay

    Nt1310 Activity 1 Fiber vs Cable

    This paper is about Copper Cable versus Fiber Cable. Or Copper vs Fiber. Two completely different materials- One’s ancient, the other is almost as old. But in today’s modern environment, both are being used to carry signals through a system, namely computer networking or the larger system, the Internet. Just in a different manner. We’ll look at what Copper and Copper Cable is, what Fiber (glass) and Fiber Optic Cable is, how it’s used and the pros and cons between the two (2).

    Words: 2266 - Pages: 10

  • Premium Essay

    Cabling

    and standard series numbers do you need to reference for Ethernet applications and cabling? A # 1) The IEEE sustains the industry standards for Ethernet applications and cabling. This is a segment of the 802.3 series of standards and includes applications such as 1000Base-T, 1000Base-SX, 10GBase-T, 10GBase-SR. I found the answer on page 8 in Cabling: The Complete Guide to Copper and Fiber-Optic Networking 4th Edition book. Q # 2) What are the different types of Category 6 cable and what should be

    Words: 675 - Pages: 3

  • Free Essay

    Unit 4 Assignment 1 Copper vs. Fiber Paper

    In the world of cabling there are two types of cables and they are Copper and Fiber Optics. Some companies chose fiber over copper but those companies have the money to use Fiber Optics and some just go with copper because it is cheaper to use. Each of these two cables has its own strengths and weaknesses. Copper: Conductivity and Heat Resistant Copper wires are second only to silver when it comes to electrical conductivity. Compared with other non-precious metals, copper wires can handle a

    Words: 1086 - Pages: 5

  • Premium Essay

    Voice vs Data. Physical Networking

    applications are to allow users to communicate with other people over the internet. Landline: The telephone started out as a Landline, hardwired connection of two or more Telephones the physical connection by means of a type of metal wire usually copper. The way to determine whether or a Telephone is a Landline or the other option being Cell phone or Mobile phone which uses radio waves to send the transmission to the receiving device or devices. The phone started out using voice transmission but

    Words: 669 - Pages: 3

  • Premium Essay

    Advans of Copper Cabling

    There are many advantages to using copper cabling. Its more durable, cheaper, and easy to install. Copper cable comes in three different types, TP-Twisted Pair, UTP-Unsheilded Twisted Pair, and Coaxial. Among these three they have their own separate intities. There is thinnet and thicknet for the coaxial and shielded and unshielded for the twisted pair. All these different cables have different transmission rates and special features. These features are coaxial has electronic support component

    Words: 330 - Pages: 2

  • Free Essay

    Physical Networking

    Information Technology (IT) requirements but also meet the needs of the building and its future occupants with respect to voice, video and data communications. The intention of this document is to provide a comprehensive understanding and reference guide that can be referred to when moving to our new building. Moving into our new building we need to follow certain cable codes and specification. A properly designed network is based around components or wiring units. The components should also follow

    Words: 2980 - Pages: 12

  • Premium Essay

    Nt1210 Introduction to Networking Onsite Course

    ITT Technical Institute NT1210 Introduction to Networking Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1110 Computer Structure and Logic or equivalent Course Description: This course serves as a foundation for the study of computer networking technologies. Concepts in data communications, such as signaling, coding and decoding, multiplexing, circuit switching and packet switching

    Words: 4400 - Pages: 18

  • Premium Essay

    Unit 10. Assignment 1. Fiber- Optic Installation

    inside structures and is similar to installation methods used for electrical wiring. Because many optical fiber cables are nonconductive, some of the requirements and restrictions for copper do not apply to fiber. When the optical fiber rests in trays or horizontal ductwork the weight of the cable is usually not a factor as long as the runs remain on the same vertical level. If optical fiber cabling is run vertically the cable will have to support itself or be secured using either cable clamps or hangers

    Words: 255 - Pages: 2

  • Premium Essay

    Fiber Optics: the Super Highway of Information

    Fiber Optics: The Super Highway of Information We live in an information age. Broadband is the foundation of economic growth and telecommunications is making its mark in all parts of the world. It is what enables the internet that drives e-commerce, education and universal access to information. Rapidly increasing communication density in this growing field and the ever increasing information flow is resulting in massive expansion in worldwide networks. The need for quick and reliable transmission

    Words: 2949 - Pages: 12

  • Free Essay

    Nt1310 Week 4 Assignment

    Unit 4 Assignment 1 Copper vs. Fiber Pape The two most common and widely used cabling types today for the means of communication all over the world are copper and fiber. They both do the same thing, transmit information from point A to point B but both have their strengths and weaknesses and therefore, a person installing cabling may be reluctant to choose one over the other. Copper cabling is less expensive to install. Copper wiring is flexible when installing so incase a technician has to bend

    Words: 1406 - Pages: 6

  • Free Essay

    Copper vs. Fiber Nt1310

    Copper vs. Fiber Todd Gerger NT1310 Abstract In this paper we will be looking at the differences between Copper and Fiber optic cables. We will discuss the differences between the two and why many of the current networks in operation use fiber on the backbone between equipment and telecommunications rooms or enclosures. Copper vs. Fiber In the comparison between fiber and copper fiber, costs of the fiber cable has come down quite a bit. The cable itself has become easier to install as well

    Words: 1089 - Pages: 5

  • Free Essay

    Fiber Optic Safety and Installation

    is to ensure that the optic fiber and copper cables that are about to be installed should comply with all the three requirements that includes the federal regulations, the international standards and the companies requirements. It is also important to wear your PPE and have the proper tools needed for the job. These are the safety rules that need to be followed with fiber optic and copper cable installation: 1. Keep all food and beverages out of the work area. If fiber particles are ingested

    Words: 2063 - Pages: 9

  • Free Essay

    Networking Unit 4

    Unit 4 Summary Make a circuit between the nodes, and send two different electrical signals different voltages, frequencies, to mean 0 or 1. The basics of how electricity can be graphed and how those graphs show features that can be changed by the sender and sensed by the receiver, so that nodes can use those features to encode data. Besides the fundamental ideas of how to use electricity to send data, some standards require two circuits, with one for each direction. It also discusses how circuits

    Words: 336 - Pages: 2

  • Free Essay

    Fiber Optic Cladding

    Fiber Optic Cladding Cladding is ordinarily know by the definition of the act or process of bonding one metal to another, usually to protect the inner metal from corrosion. In the case of fiber optics metals are not used glass is in place of metal. Core (optical fiber) The structure of a typical single-mode fiber. The core of a conventional optical fiber is a cylinder of glass or plastic that runs along the fiber's length. The core is surrounded by a medium with a lower index of refraction

    Words: 288 - Pages: 2

  • Free Essay

    Testing Your Fiber Optic Cables

    Testing your Fiber-Optic Cables Testing is used to evaluate the performance of fiber optic components, cable plants and systems. As the components like fiber, connectors, splices, LED or laser sources, detectors and receivers are being developed, testing confirms their performance specifications and helps understand how they will work together. Designers of fiber optic cable plants and networks depend on these specifications to determine if networks will work for the planned applications. 1

    Words: 538 - Pages: 3

  • Premium Essay

    Fiber Optics

    Fibre Optics A relatively new technology with vast potential importance, fibre optics, is the channelled transmission of light through hair-thin glass fibres. The clear advantages of fibre optics are too often obscured by concerns that may have been valid during the pioneering days of fibre, but that have since been answered by technical advances. Fibre is fragile An optical fibre has greater tensile strength than copper or steel fibres of the same diameter. It is flexible, bends

    Words: 2158 - Pages: 9

  • Premium Essay

    Unit 8. Lab 1. Fiber Optic Connector Assembly

    Unit 8. Lab 1. Fiber Optic Connector Assembly Fiber Stripping “The outer sheath of fiber cables can be removed using electrical cable stripping tools, and scissors or a razor blade can trim the Kevlar strength member. However, the fiber coating must be very carefully removed to avoid damaging the fiber, surface flaws and scratches are the cause of most fiber failures. The coating can be removed using fiber strippers.” (Newport, nd) Fiber Termination “End-face surface quality is one of the

    Words: 1739 - Pages: 7

  • Free Essay

    Nt1310 Copper vs Fiber

    Copper is the most used cabling solution in the market at the moment due to its ease of use and its price. Even the equipment is substantially cheaper to buy than other means of transmission. Copper cabling utilizes a single or multiple strands of copper to transmit data from one end to the other. Copper is broken up amongst several different categories each with their own set of improvements and flaws ranging from difficulty of installation to cost. The lower the category the more prone to interference

    Words: 640 - Pages: 3

  • Free Essay

    Nt1310 Final Study Guide

    NT1310 - Final Study Guide 393 Know what tools are required to terminate a twisted pair cable? Cable, connectors, stripping tool, crimping tool. 417 What role does a fiber microscope play in the termination and installation of a fiber cable? Allows you to look at the end of the optics for any flaws that may cause problems 452 What are the different causes for crosstalk ? Inferior, inferior components, improper patch cable, split pairs, couplers, twisting, sharing cables 455 What are the

    Words: 1093 - Pages: 5

  • Free Essay

    Fiber Optics

    History of Fiber Optics The idea of using light waves for communication can be traced as far back as 1880 when Alexander Graham Bell invented the “photo-phone” shortly after he invented the telephone in 1876. In this remarkable experiment, speech was transmitted by modulating a light beam, which traveled through air to the receiver. The flexible reflecting diaphragm (which could be activated by sound) was illuminated by sunlight. The reflected light was received by a parabolic reflector placed

    Words: 2001 - Pages: 9

  • Free Essay

    Cabling Standards

    INTRODUCTION TO STRUCTURED CABLING Compiled by Sonam Dukda Division of Information Technology Ministry of Communication September 2000 TABLE OF CONTENTS 1 2 INTRODUCTION .......................................................................................................................... 4 NETWORKING ............................................................................................................................. 5 2.1 Objectives .......................................

    Words: 5055 - Pages: 21

  • Free Essay

    Optical Fiber Networking

    … 3-4 What is Optical Networking........... .......... ......... ........ ............ ................ 4 Standards........ ….... ….............. …........... …......... …........... ….......... .. 4 Historical Milestones........ …... …... …...... ….... …......... …....... …....... 4 Optical Networking why......... ….......... …..................... …................ …. 5 Principles and Operation............... …................. …........ ….............. …... 5-8 Single Mode Fiber...

    Words: 3428 - Pages: 14

  • Free Essay

    Fiber Optics

    Fiber is Basis of Info Highway Table of Contents Title Page1 Table of contents2 Article Review…………………………………………………………………………………………………………………………………..3-4 Companies Review....................................................................................................................................5-7 Works Cited8 The article “Fiber is Basis of Info Highway”; written by: Mathew Ingram for the Globe and Mail; is about the race to cover the globe with fiber optic cable. The author talks about

    Words: 1117 - Pages: 5

+
-