Premium Essay

Products Liability Research Paper: Brazilian Blowout

In: Business and Management

Submitted By tkfayne
Words 1664
Pages 7
Products Liability Research Paper: Brazilian Blowout
By

Tekendrea Fayne

LEG500011VA016-1126-001: Law, Ethics & Corp. Governance

Francis Hatstat

Strayer University

September 9, 2012

Premises
Brazilian Blowout Professional Treatments are use of innovative and breakthrough bonding technologies, these treatments actually improve the health and condition of the hair by creating a protective protein layer around the hair shaft to eliminate frizz and smooth the cuticle. These treatments aim to smooth out unruly curls and waves and to reduce frizz. However, the treatments do not guarantee completely straight hair. If the Brazilian Blowout is performed correctly, about 50 to 80 percent of the curl can be reduced depending on the original hair texture. Treatments last around 10–12 weeks and repeating the treatment every few months will allow for treatment of new growth. Depending on the treatment used downtime, after it is performed ranges from no-wait to a 72 hour period in which the recipient cannot wash or wet the hair, exercise, tuck the hair behind the ears, or pin it up with any hair clip, pony tail holder or headband, as doing so may compromise the result of the treatment. The treatment on average cost about $150–$600 depending on the hair length.
FDA states that Brazilian Blowouts are hazardous to the health of the women who use them and hairdressers who apply them. The concern is over the “alleged” presence of formaldehyde in the hair smoothing products which centers around three issues: nomenclature; method by which formaldehyde concentration is measured; and measurements of formaldehyde concentration in bottles of the product. The reported concentration is dependent upon both the method of measurement and nomenclature. American Chemistry Society noted that formaldehyde content-in both gaseous and aqueous forms-should be accounted for…...

Similar Documents

Premium Essay

Product Liability Management

...Product Liability Management Victor Adejayan Dr. Dianne Barrs Strayer University LEG 500 September, 2012 Product liability is the responsibility of a manufacturer for injury or loss caused by its product (Dictionary.com). Product liability serves to protect the public but it is may turn out to be very expensive to organizations. Management has the duty of making sure that organizations’ resources, especially funds and reputation, do not suffer unnecessary attrition and damages through the implementation of effective, affordable product liability programs. It is important to have people in management that possess the skills such needed to solve liability issues in the legal arena, most importantly before they occur.The challenge of the manager is fulfilling his/hers responsibilities by generating profit in business while protecting the interests of otherstakeholders, such as, employees and customers. Though the savvy manager cannot stop people from having the intention and grievances to sue the organization, they can reduce the motive of prospective plaintiffs and in event of a lawsuit happens; effective product liability management mitigates the negative effects on the organization. Management has the duty of making sure the product liability policies and programs of the organization is clear, concise and precise so that the interpretation thereof cannot be turned to work against the organization. Most lawsuits that are directed at organizations......

Words: 1890 - Pages: 8

Free Essay

The Effect of Product Liability on Engineers

...The Effect of Product Liability on Engineers Sam Heithoff Mechanical Systems Design 8-27-12 The objective of this paper is to show that while general law processes in America are wasteful and hinder people and companies, product liability is beneficial to engineers. Since the inception and revolution of product liability law, the engineering process has been affected. Through specific examples and firsthand accounts, it will be established that the relationship between product safety mandates and standard engineering practices is symbiotic. America is a sue-happy country. A sentiment uttered by many patriots and internationals alike, there are even organizations formed purely to stand against the American litigious nature. Although whether it is culture or simply the 1.2 million lawyers eager to prove themselves in court remains to be seen. While lawsuit abuse has harmed innumerous people worldwide, practical legal pursuits improve the security of general life in society. From an engineering standpoint, product liability suits fall under the latter category. While some companies state that product liability hinders innovation by funneling company resources away from engineers and other productive ventures, most cases show that product liability does not inhibit creativity [1]. Certainly there are frivolous suits in the realm of product liability just like any other aspect of the legal system, but engineers are protected from potentially ridiculous claims. With legal...

Words: 1120 - Pages: 5

Free Essay

Products Liability

...Running Head: Products Liability Assignment 4: Products Liability Name Law and Ethics in the Business Environment Professor February 17, 2013 Products Liability Johnson & Johnson Johnson & Johnson started out making surgical dressing for hospitals and then that progressed into what Johnson & Johnson is best known for is the Band-Aid brand band aid. They added tape to the dressing and the product was convenient for hospitals as well as mending cuts and scrapes that people get, targeting kids because they are accident prone. In later years Johnson & Johnson explored other opportunities mainly in the over-the-counter medicinal products. Over the years they have been subject to many lawsuits but the one this paper will focus on is the product liability lawsuit on the DePuy ASR hip implant. DePuy is a company that specializes in orthopedic products and was acquired by Johnson & Johnson in 1998. The metal on metal hip replacement DePuy ASR was approved by the FDA for use by surgeons on patients that were in need of a hip replacement in 2005. (Meier, 2010). The DePuy ASR hip replacement should have a life of at least 10 years. The device was being used on patients, soon after the DePuy dividion of Johnson & Johnson started receiving complaints of the device with the largest spike of complaints in 2009. (Meier, 2010). Many of the complaints resulted in the patient having to receive another hip replacement only a few......

Words: 1869 - Pages: 8

Premium Essay

Product Liability and Legal Ramifications

...Product Liability and Legal Ramifications Christopher M. Branch MBA 5861 New Product Marketing 08/13/2013 Christopher Branch MBA 5861 Term 1A Dr. David Castle 08/13/2013 Product Liability and Legal Ramifications The next time you walk into a retail store like Wal-Mart, Target, Home Depot, Office Depot, Babies R’ Us/Toy R’ Us, you will see a board, typically in plain sight of the viewing public, with sheets of papers titled “Product Recall” or Safety Recall or something of the like. Recalled items run the gamut of consumers good and are generally recalled because of a safety or health concerns. The Food and Drug Administration regularly issues recalls or public safety notices for Medical Products, Pharmaceuticals, Tobacco, and contaminated food items. Product Liability is the responsibility of manufacturers, distributors and sellers, they are expected to act in the best interest of the public; to deliver a product free of defects which can harm an individual or persons; and to make good on that responsibility if their products are defective. These can include faulty auto brakes, contaminated baby food, exploding bottles of beer, flammable children's pajamas, or lack of label warnings. The key element in products liability law is that a person who suffers harm from a product need not prove negligence, since the negligence is "presumed" and the result is "strict liability" (absolute responsibility) on the seller, distributor and manufacturer. An injured......

Words: 3293 - Pages: 14

Premium Essay

Products Liability

...Products Liability Research Paper Tonya Bailey Strayer University LEG 500---Law, Ethics, and Corporate Governance Professor Lynn Macbeth June 2, 2012 Products Liability Introduction As consumers, we purchase products that we feel are beneficial to us in some way or another. The products that we decide and choose to purchase are solely up to the individual. If there is a problem or accident that may occur a result with use of that product, then the consumer is liable. But producers and manufacturers are not exempt being that it is there product, and this is where legal liability issues occur. “Product liability refers to the responsibility of manufacturers for injuries and damages caused by their products” (Hellriegel & Slocum, 2011, pg. 52). In this paper, I will examine the Toyota Motor Company and how this company has been the subject of a product liability lawsuit. First, I describe the company and the product safety issue that led to the lawsuit. Next, I will discuss the legal theories used by the plaintiff to recover in this lawsuit, how the lawsuit was resolved, and why I agree with the decision in the case. Then, it will be relevant to mention the changes that have taken place in the company to ensure greater safety of this product or its products, including specific policies that the company has put in place to protect consumers and end users who purchase and use its product. Afterwards, I will discuss the regulatory agency that oversees the......

Words: 773 - Pages: 4

Free Essay

Products Liability Research Paper

...Products Liability Research Paper Select a company that has been the subject of a product liability lawsuit in the last ten (10) years. The Plaintiffs vs. Bayer Pharmaceuticals, the German manufacturer of the birth controls Yaz and Yasmin has landed themselves in hot water and is headed to the courts. Bayer Pharmaceuticals net worth is over a billion dollars and is still climbing. The use of the birth controls Yaz and Yasmin has sparked a lot of attention with claims of a number of dangerous side effects. This case has become very popular, with over 11,300 claims pending and the possibility of more to come, Bayer is expected to pay out about $110 Million in the Yaz case in an attempt to avoid being tried before a jury but that is only the beginning of a long list of active claims. The use of these birth controls are causing an increased number of blood clots in women as well as complications of blood disorders, problems of the heart, strokes, and in some cases even death. www.drugwatch.com the problem appears to be stemming from drospirenone (a progestin) that is found in the birth control pills. In the case of Shannon Landry of Louisiana she filed a complaint with the U.S. district Court for the Southern District of Illinois. In 2000 Landry began taking Yaz and continued until 2010, and shortly thereafter she began having severe side effects. She was later diagnosed with a gallbladder disease called biliary dyskinesia that resulted in surgery to have her gallbladder......

Words: 2128 - Pages: 9

Free Essay

Research Product

...research CHAPTER 1 INTRODUCTION 1.1 BACKGROUND OF INDUSTRIAL TRAINING All final year students of Bachelor of Sciences (Hons) (Statistics), Faculty of Computer and Mathematical Sciences, Universiti Teknologi MARA (UiTM) are required to undergo the industrial training. The students will be placed in the government or private organizations of their choice for a period of three months, during which they are also required to design a research project. The following one month will be allocated for data analysis, report writing and oral presentation. This training is very beneficial and important to expose students to the various aspects of industrial practices and ethics. The students are also able to apply the theories and knowledge that they have learned to the projects assigned to them. 1.2 OBJECTIVES OF INDUSTRIAL TRAINING The objectives of the industrial training are: ❖ To expose students to the real working environment ❖ To train students being familiar with the organization structure, operations, and administration. ❖ To acquire real experience in solving research problems and apply appropriate statistical data analysis. ❖ To enable students to integrate the theory learned at UiTM with practice. ❖ To cultivate cooperative networking between industries and UiTM 1.3 INDUSTRIAL TRAINING ATTACHMENT I had undergone my industrial training at Socio Economic and......

Words: 10336 - Pages: 42

Premium Essay

Product Recall and Associated Liability

...Product Recall and Associated Liability Professor Muse Business | 670 Legal environment Londone Williams February 4, 2014 Product liability has been a subject that can create issues within a business. There have been various businesses that have gone bankrupt as a result of product liability problems. It is important for a company to consider the risk and liabilities with great consequences. This paper will discuss the significance of product liability and the role retailers play. The product that will be discussed in this paper is the Lion Force boys Puffer coat. The Puffer Coat, was recalled February 4, 2014, the recall number is 14-100. The Puffer Coat was recalled due to hazardous strangulation of children. The Puffer Coat was made in China, and as with many other products, is imported into the United States. “They typical product liability case involves a defective product purchased by the plaintiff who was subsequently injured by the product” (Kluwer, 2007). The goal of the United States Consumer Safety Commission is to guard the public from irrational possibility to injuries connected with consumer products. The U.S. Consumer Safety Commission’s function is to observe corrective plans that are known as recalls. There are more than 300 recalls each year from different manufacturers and distributors. Some of the recalls that are made are done because the Consumer Safety Commission determines that a product is faulty. In......

Words: 1088 - Pages: 5

Free Essay

Business Civic Liability Research Paper

...Eric Moreno Business Civic Liability Research Paper MGMT 518 12/4/2012 Businesses today have to take a multitude of factors into consideration to try and stay on the positive end of the profit margin. One important factor that many businesses often overlook is the “ticking time bomb” that they may have already hired. Businesses need to realize the risk that they may be held civilly liable for some of the criminal acts of their employees. This is no black and white issue either; with the constantly changing and evolving legal system we have here in this country, any one act done by an employee can also be used to sue the employer. Why do businesses need to worry about this? Well, most plaintiffs will go after the deeper pockets of the employer, and juries may be more inclined to side with the plaintiff rather than one of these “big” companies. Therefore, it is important that business protect themselves from liability. The type of protection depends on the industry. Often, however, doing simple things like conducting a thorough background check, having a code of ethics or conduct can shield companies from liability. Conducting a thorough background check seems to be the most efficient way to protect a company from an employee’s criminal activity—by preventing that employee from working at the company in the first place. Filtering out employees with criminal pasts or problems with prior employers can help minimize the liability of a company from its employees’ actions....

Words: 1331 - Pages: 6

Premium Essay

Product Development Research Paper

...Kevin Dunn MGT 364- Section 01 Research Paper: Product Development Dr. Denton November 21, 2013 Table of Contents: I. Introduction……………………………………………………………………3 II. Developing Products………………………………………………………….4 III. Product Differentiation……………………………………………………..10 IV. Conclusion and Recommendations ………………………………………..13 V. Works Cited…………………………………………………………………..15 Introduction Product development is one of the most important aspects to any business. New and innovative products have placed companies like Apple, Google and Samsung on the map. Companies like General Motors have been able to rebound from bankruptcy thanks to product development. On the other hand, companies like Eastman Kodak have fallen by the wayside due to their inability to keep up with new products. According to an article in the European Journal of Engineering Education, “Product development is the set of activities starting with the perception of a market need and ending in the production and sale of a new product satisfying that need” (Silva, Arlindo, Elsa Henriques, Aldina Carvalho). By successfully developing a product firms can see increased profits as well as an increased market share. To the helicopter game players, proper product development can set one team apart and earn them more profits. The purpose of this research paper is to explain how to successfully build a product through the phases of product development and product differentiation. As well as to give......

Words: 3881 - Pages: 16

Free Essay

Wisconsin Product Liabilities Paper

...Wisconsin Product Liability Laws According to Find Law, a website dedicated to helping people find lawyers, “Defective or dangerous products are the cause of thousands of injuries every year in the U.S.” (Find Law, n.d.). If people are getting injured because of defective products, there must be some kind of legislation that protects consumers. Product liability laws are laws that were created so that people who are injured from a defective product can sue to recover damages. Keep in mind that a defective product does not simply mean that the product is broken. The Business Dictionary says that a defective product is “unfit for its intended use, dangerous or harmful for normal use, does not carry adequate instructions for its use, or is inherently dangerous due to defective design, assembly, or manufacture” (Business Dictionary, n.d.). If a product is dangerous to use, why would people still use it? Sometimes the danger that lurks within a product is not visible, and unfortunately it takes someone getting hurt before anyone notices that something is wrong with it. It is these types of products that product liability laws protect us from. So then, whose laws protect us? During this class, we have learned that federal laws are the highest laws of the land. That means that if a crime is committed, state courts must follow federal laws if there is a law in place for that particular crime. What are the federal laws when it comes to product liability? There are none. Product......

Words: 3225 - Pages: 13

Premium Essay

Bul Product Liability

...Shalene Kolchek can sue Val Porter, a dealer who sells and sold the spa to Kolchek to recover Litisha’s injuries under the product liability for misrepresentation. She can also sue Great Lakes to recover Litisha’s injuries under the product liability based on negligence and strict product liability. Based on misrepresentation, Val Porter gave Kolchek the manufacturer’s paperwork intending to induce Kolchek reliance on the manufacturer’s paperwork resulting in reckless disregard for the facts of the spa defects. Val Porter failed to explain any foreseeable injuries the spa may have caused. Great Lakes Spa failed to exercise “due care” to make the spa safe, resulting in the injury of Litisha’s finger. Based on Negligence, “due care” must be used in designing the product, selecting the materials, using the appropriate production process, assembling and testing the product, placing adequate warnings to inform danger, inspect and test any purchased components used in the product. Under the Strict product Liability, Great Lakes Spa is liable for Litisha’s injuries for the following reasons. The spa was defective when sold by Val Porter, a dealer who sales spas. The spa is unreasonably dangerous due to its defective condition and was never substantially changed from the time the product was sold to the time the injury was sustained. The jet holes caused physical harm to Litisha when she stuck her finger inside the jet holes made by Great Lakes Spa. The foreseeable risks of......

Words: 754 - Pages: 4

Free Essay

Kudler Fine Foods Product Liability Analysis

...Kudler Fine Foods Product Liability Analysis This analysis document will focus on legal issues concerning product liability as it relates to the food industry. Kudler’s Fine Foods (KFF) virtual organization will be used as the focal point of this analysis. KFF stores have establishments at three different locations in San Diego, California. The business model focuses on providing the finest gourmet organic-based food business. It always strives to satisfy their clientele by bringing new products based on weekly product sales in comparison to other competitors at affordable prices. KFF’s legal strategy consists on relying on one tax lawyer. This lawyer is a relative of the owner. The owner has instructed store managers to only report any issues concerning a slip and fall. Besides a slip and fall, the store managers will determine if any other incidents should be brought up to the attention of the owner. Then the owner will decide if these issues merit being elevated to the company’s attorney or for the owner to resolve them (Kudler Virtual Organization, 2008). The majority of KFF business is based on providing organic and non-organic food products to their clients, the company should be concerned about implications on how a case of product liability could affect the business. What is product liability and how it relates to the food industry According to The Free Dictionary by Farlex (2010) product liability is defined as, “The responsibility of a manufacturer or vendor......

Words: 1008 - Pages: 5

Premium Essay

Marketing of Liability Products of Bank

...Assignment Topic: Marketing of Bank’s Liability products Subject: Marketing Management – I Ankita Roy 11DM008 Neha Saha 11DM018 P.Santhosh 11DM028 Siddarth Singh 11DM038 Anirban Dhar 11DM048 Debabrata Subudhi 11DM058 Marketing of Liability Products Introduction; Commercial banks offers a varieties of product to the customers, these products are known as ‘’liability product” because they represent liability of the bank. Consumer generally know them as “deposit product”. There are number of Liabilty products, some of the liability products are listed below * Savings Account * Fixed Deposit Account * Recurring Deposit * Current Account * NRI Account Etc…. These products are the basic products of bank which are taking new dimensions in the banking world as the competition is tougher. The products which are mentioned above are the products of Retail Banking. Wholesale banking is another big segment of bank which deals with the SME and Corporate clients. WholeSale Banking Wholesale banking is the provision of services by banks to the likes of large corporate clients, mid-sized companies, real estate developers and investors, international trade finance businesses, institutional customers (such as pension funds and government entities/agencies), and services offered to other banks or other financial institutions. In essence, wholesale banking services usually involve high value transactions. Divisions * Corporate Banking ......

Words: 3357 - Pages: 14

Free Essay

Product Liability

...Product Liability BUS:311 Instructor Samantha Hodapp November 28, 2011 Product Liability 1. Thesis a. As a consumer, you make product purchases on a consistent basis. Once you make your purchases, you are responsible for what happens to those purchases. However, the producers of these products are not completely free from accountability once their product is bought. This is where the term product liability comes into play. During this paper, I will explore the legal aspects of product liability and how it affects businesses. 2. What is product liability? b. According to our text, product liability is the accountability of a producer or seller for injury to buyers, users, and third parties. There are four elements that need to exist in order for the claimant to prove negligence by the manufactuer. These elements are duty, breach, proximate cause, and damages (Liuzzo & Bonnice, 2007). c. The bases for injury claims under product liability consists of product flaw, failure to warn, and design defect. These three characteristics generally become the foundation of claims filed against manufacturers (Liuzzo & Bonnice, 2007). 3. Who can be held liable for injuries caused by products? a. Manufacturers of products are not the only party that can be held liable for a product defect. Other parties that could be held liable include retailers, wholesalers, parts manufacturers, assembly workers, product endorsers, etc. Retailers are most......

Words: 567 - Pages: 3