Premium Essay


In: Business and Management

Submitted By mimialaa
Words 2767
Pages 12
A Hospital information system is a comprehensive, integrated information system designed to manage all the aspects of a hospital operation, such as medical, administrative, financial, legal and the corresponding service processing. Traditional approaches encompass paper-based information processing as well as resident work position and mobile data acquisition and presentation.
One of the most important issues is health services. Hospitals provide a medical assistance to people. The best introduction for hospital information systems has been made in 2011 International Conference on Social Science and Humanity
Hospital Information Systems can be defined as massive, integrated systems that support the comprehensive information requirements of hospitals, including patient, clinical, ancillary and financial management. Hospitals are extremely complex institutions with large departments and units coordinate care for patients. Hospitals are becoming more reliant on the ability of hospital information system (HIS) to assist in the diagnosis, management and education for better and improved services and practices
Hospitals are convenient settings for deployment of ubiquitous computing technology. Not only are they technology-rich environments, but their workers experience a high level of mobility resulting in information infrastructures with artifacts distributed throughout the premises. Hospital information systems (HISs) that provide access to electronic patient records are a step in the direction of providing accurate and timely information to hospital staff in support of adequate decision-making. This has motivated the introduction of mobile computing technology in hospitals based on designs which respond to their particular conditions and demands. Among those conditions is the fact that worker mobility does not exclude the need for having shared information artifacts…...

Similar Documents

Premium Essay

Selection Structures

...pseudocode for each module (See example 2.6 on page 83 as an example). 4.5. Include header and step comments in your pseudocode, using a similar approach as the example provided in section 2.3 (textbook page 86). See example 2.7 on pages 87-88). 4. Test the program 5.6. Prepare at least 3 sets of input data (Test data) along with their expected output for testing your program. Your test data can be presented in the form of a table as follows (note: feel free to adapt to your design): a. Input: | Expected output: | Number1=2Number2=4Number3=1 | SmallestNumber=1 | Number1=Number2=Number3= | SmallestNumber= | Number1=Number2=Number3= | SmallestNumber= | b. Input: | Expected output: | Number1=9Number2=4Number3=5Number5=3Number6=6Number7=2Number8=7Number9=11Number10=14 | SmallestNumber=2 | Number1=Number2=Number3=Number5=Number6=Number7=Number8=Number9=Number10= | SmallestNumber= | Number1=Number2=Number3=Number5=Number6=Number7=Number8=Number9=Number10= | SmallestNumber= |...

Words: 467 - Pages: 2

Free Essay

Week 2 Programming

...can be any reasonable length. Differences 1. Visual basic has Graphical User Interface while most of the languages such as c and c++ doesn't have 2. It has IDE i.e. other languages design there programs on editor and run program on dos prompt but in case of visual basic all tasks are done under same environment. 3. Visual basic is an event driven language. p.71 Short Answer 1. Ask Questions 2. Pseudocode is a kind of structured English for describing algorithms 3. Input received, Process happens, Output produced 4. Easier to understand and manipulate Workbench 1. Console.WriteLine("Enter Height:"); String number1 = String.Empty; number1 = Console.ReadLine(); 2. Console.WriteLine("Enter Color:"); String number1 = String.Empty; number1 = Console.ReadLine(); Program 1. Console.WriteLine("Matt Mattes"); Console.WriteLine("112 N. Cambie, Post Falls ID, 83854"); Console.WriteLine("208-818-5620"); Console.WriteLine("NSA"); Console.ReadLine();...

Words: 251 - Pages: 2

Free Essay

Operating System

...Rashid, A.Tevanian,andM.Young,"Mach:ANewKernelFoundationfo rUnix Development",ProceedingsoftheSummerUSENIXConference(1986),pages 93-112. [Agrawa landAbbadi1991]D.P.AgrawalandA.E.Abbadi,"AnEfficientand Fault-TolerantSolutionofDistributedMutualExclusion",ACM Transactionson ComputerSystems,Volume9,Number1(1991) ,pages1-20 . [Agr e2003]P.E.Agre,"P2PandthePromiseofInternetEquality",Communica-tionsoftheACM,Volume46,Number2(2003) ,pages39-42. [Ahituvetal.1987 ]N.Ahituv,Y.Lapid,andS.Neumann,"Processing EncryptedData",CommunicationsoftheACM,Volume30,Number9(1987) , pages777-780. [Ahmed2000 ]I.Ahmed,"ClusterComputing:AGlanceatRecentEvents",IEEE Concurrency,Volume8,Number1(2000) . [Ak l1983]S.G.Akl,"DigitalSignatures:ATutorialSurvey",Computer,Volume 16 ,Number2(1983) ,pages15-24. [AkyurekandSalem1993]S.AkyurekandK.Salem,"AdaptiveBlockRear-rangement" ,ProceedingsoftheInternationalConferenceonDataEngineering(1993), pages182-189. [Al t1993]H.Alt,"RemovableMediainSolaris",ProceedingsoftheWinter USENIXConference(1993) ,pages281-287. [Anderson1990 ]T.E.Anderson,"ThePerformanceofSpinLockAlternatives fo rShared-MoneyMultiprocessors",IEEETrans.ParallelDistrib.Syst.,Volume 1,Number1(1990) ,pages6-16. [Andersonetal.1989 ]T.E.Anderson,E.D.Lazowska,andH.M.Levy,"The PerformanceImplicationsofThreadManagementAlternativesfo rShared-855 85......

Words: 5897 - Pages: 24

Free Essay

Security Policy

... */ /* Algorithm: uses a programmer defined */ /* function maximum to determine and */ /* return the largest of three */ /* floating point numbers */ /* */ /* See additional notes for A4 */ */ */ /****************************************************/ #include using std::cout; using std::cin; using std::endl; Declare the function prototype for maximum int main() { Declare number1, number2, number3 as double cout > number1 >> number2 >> number3; // number1, number2 and number3 are arguments to // the maximum function call cout...

Words: 485 - Pages: 2

Free Essay

Programming control the number of times it repeats. 4. A count-controlled loop repeats a specific number of times. 5. Using the counter variable, the loop typically performs the following three actions: initialization, test, and increment. 1. //Declare local variables //Ask user for number to be multiplied Declare Integer number = 0 Declare Integer product Set keepGoing = “y” While keepGoing = “y” Display “Enter a number to be multiplied by 10: “ Input number Set product = number * 10 Display “Enter y to continue again” End While 2. //Declare Local Variables //Ask user to enter 2 numbers Declare Integer number1 = 0 Declare Integer number2 = 0 Declare Integer sum Declare String keepGoing = “y” Do Display “Please enter your 1st number: “ Input number1 Display “Please enter your 2nd number: “ Input number2 Set sum = number1 + number2 Display “The sum of those numbers is “, sum Display “Do you wish to repeat this process? Enter y to continue...” While keepGoing = “y” Input keepGoing 7. Do-While Loop: Declare Integer x = 1 Declare String keepGoing = “y” Do Input x Display “Do you wish to repeat?” While keepGoing = y End While 8. While loop: Declare String sure While sure != “Y” AND sure != “y” Display “Are you sure you want to quit?” Input sure 1. //Declare local variables //Ask user for number of bugs on each day Declare Integer counter = 1 Declare integer day = 1 Declare Integer totalBugs For counter = 1 to......

Words: 437 - Pages: 2

Free Essay

Carter Cleaning Company

...mulai nomor) 3.        Fungsi MID digunakan untu mengambil karakter tertentu dari sederet karakter, penulisannya :        =MID(text,posisi awal,jumlah karakter) 4.        Fungsi REPLACE digunakan untuk menggantikan substring dengan substring lain dalam sebuah string (sederetan karakter atau karakter),, penulisan :        = REPLACE (…) 5.        Fungsi CONCATENATE digunakan untuk menggabungkan string menjadi satu kalimat maksimal 30 string, penulisannya  =CONCATENATE(text1,text2,…) 6.        Fungsi MAX Digunakan untuk mencari nilai tertinggi dari sekumpulan data, penulisannya :        =MAX(number1,number2,…) 7.        Fungsi STEDEV Digunakan untuk menentukan standart devisiasi dari suatu range, penulisannya : =STEDEV(number1,number2,…) 8.        Fungsi VAR Digunakan untuk menentukan nilai varience dari suatu range, penulisannya : =VAR(number1,number2,…) 9.        Fungsi LEFT Fungsi ini digunakan untuk mendapatkan hasil beberapa huruf paling kiri. Text di sini merujuk kepada text yang akan diambil. Bisa berupa nilai sel ataupun langsung diketikkan textnya di situ, tapi dengan menambahkan tanda petik dua (") di awal dan di akhir text. Rumusnya sangat simpel. =LEFT(text) 10.    Fungsi RIGHT Fungsi ini adalah kebalikan dari fungsi LEFT, yaitu mengambil beberapa karakter yang dimulai dari kanan. Rumusnya mirip sekali dengan fungsi LEFT yaitu: =RIGHT(text) 11.    Fungsi LEN Fungsi ini digunakan untuk menghitung jumlah karakter yang......

Words: 2917 - Pages: 12

Free Essay

Object Oriented Programming in Java ‐ Exercises

...applet import java.awt.Graphics; public class DisplayNameApplet extends Applet { public void paint(Graphics g) { g.drawString("Mohamed Faisal", 50, 25); } } // filename: DisplayNameApplet.htm // place in same folder as the compiled DisplayNameApplet.class file Displaying my Name CHAPTER 2    3.  Write a program that calculates and prints the product of three integers.    // filename: import java.util.Scanner; // import Scanner libraries for input public class Q1 { public static void main(String[] args) { Scanner input = new Scanner (; int number1; int number2; int number3; System.out.println("Enter the First Number");  number1 = input.nextInt(); System.out.println("Enter the Second Number"); number2 = input.nextInt(); System.out.println("Enter the Third Number"); number3 = input.nextInt(); System.out.printf("The product of three number is %d:", number1 * number2 * number3); } }     4. Write a program that converts a Fahrenheit degree to Celsius using the formula:     // filename: import java.util.*; public class Q2 { public static void main(String[] args) { Scanner input = new Scanner(; double celsius; double tempInFahrenheit = 0.0; celsius = (tempInFahrenheit - 32.0) * 5.0 / 9.0; System.out.println("Enter the fahrenheit value"); tempInFahrenheit = input.nextDouble(); System.out.printf("The celsious value of %10.2f is %2.2f",tempInFahrenheit, celsius); } } 5.......

Words: 3130 - Pages: 13

Premium Essay


...STDEV Estimates standard deviation based on a sample. The standard deviation is a measure of how widely values are dispersed from the average value (the mean). Syntax STDEV (number1, number2,…) Number1, number2… are 1 to 30 number arguments corresponding to a sample of a population. You can also use a single array or a reference to an array instead of arguments separated by commas. Remarks STDEV assume that its arguments are a sample of the population. If your data represents the entire population, then compute the standard deviation using STDEVP. The standard deviation is calculated using the “n-1” method. Arguments can either be numbers or names, arrays, or references that contain numbers. Logical values and text representation of numbers that you type directly into the list of arguments are counted. If an argument is an array or reference, only numbers in that array or reference are counted. Empty cells, logical values, text, or error values in the array or reference are ignored. Arguments that are error values or text that cannot be translated into numbers cause errors. If you want to include logical values or text representation of numbers in a reference as a part of the calculation, use the STDEVA function. EXAMPLE: Suppose 10 tools stamped from the same machine during a production run are collected as a random sample and measured for breaking strength. The example may be easier to understand if we copy it to a blank worksheet. ...

Words: 279 - Pages: 2

Free Essay


...print("Enter two numbers: "); double number1 = input.nextDouble(); double number2 = input.nextDouble(); // Compute sum double sum = (number1 + number2); // Display result Promt the user to enter two numbers System.out.print("Enter two numbers; "); Double number1 = input.nextDouble(); Double number2 = input.nextDouble(); // Compute sum Double sum = (number1 + number2); // Display result System.out.println("The sum of " + number1 + " " + number2 + " " + " is " " + sum); // Compute difference double difference = (number1 - number2); // Display result System.out.println("The difference of " + number1 + " " + number2 + " is " + difference); // Dispute difference Double difference = (number1 - number2); // Display result System.out.println("The difference of " + number1 + " " + number2 + " is " " + difference); // Compute product double product = (number1 * number2); // Display result System.out.println("The product of " + number1 + " " + number2 + " is " " + product); // Compute quoient Double quoient = (number1 / number2); // Display result System.out.println("The quoient of " + number1 + " " + number2 + " is " " + quoient); // Compute quoient Double quoient " (number1 / number2); // Display result System.out.println("The difference of " + number1 + " " + number2 + " is " " + difference); // Compute product double product = (number1 * number2); // Display result System.out.println("The product of " + number1 + " " + number2 + " is " "......

Words: 254 - Pages: 2

Free Essay

Dfggg Fef

...COMP 122 iLab 1 Introduction to VC++ dot NET IDE Question Sheet TEST PLAN: PREDICTED RESULTS |Test |Input |Predicted Output | |No. | | | | |number1 |number2 |Sum |Difference |Product |Quotient | |1 |6 |3 |9 |3 |18 |2 | |2 |-6 |-3 |-9 |-3 |18 |2 | |3 |6 |-3 |3 |3 |18 |-2 | |4 |-6 |3 |-3 |-9 |-18 |-2 | |5 |3 |6 |9 |-3 |18 |-.5 | |6 |6 |6 |12 |0 |36 |1 | |7 |10 |4 |14 |6 |40 |2.5 | |8 |6 |1 |7 |5 |6 |6 | |9 |1 |6 |7 ...

Words: 932 - Pages: 4

Premium Essay


...Module main() //Declare local variables Declare Integer counter = 0 Declare String studentName = “NO NAME” Declare Real averageRight = 0.0 Declare Real right = 0.0 Declare Integer number1 = 0 Declare Integer number2 = 0 Declare answer = 0.0 Set studentName = inputNames() //Loop to run program again While counter < 10 //calls functions Call getNumbers(number1, number2) Set answer = getAnswer(number1, number2, answer) Set right = checkAnswer(number1, number2, answer, right) Set counter = counter + 1 End While Set averageRight = results(right, averageRight) Call displayInfo(right, averageRight, studentName) End Module Function String inputNames(String studentName) Display “Enter Student Name:” Input studentName Return studentName End Function Module getNumber(Integer Ref number1, Integer Ref number2) Set number1 = random(1, 500) Set number2 = random(1, 500) End Module Function Integer getAnswer(Integer number1, Integer number2, Integer answer) Display “What is the answer to the following equation” Display number1 Display “+” Display number2 Display “What is the sum:” Input answer Return answer End Function Function Integer checkAnswer(Integer number1, Integer number2, Integer answer, Integer right) If answer == number1 + number2 then Display “Right” Set right = right + 1 Else Display “Wrong” End If Return right End Function Function Real results (Integer right, Real......

Words: 2530 - Pages: 11

Free Essay

Input and Output Stream

...Tutorial 2: Exercise on Input and Output Stream 1. Write a C++ program to display the following output on the screen using multiple cout statements. 2. Write a C++ program to display the following output using only one cout statement. 3. Write the output of the following program. #include <iostream> using namespace std; int main () { int number1 = 45; float number2 = 75.25; cout<<"The Value of number1 = "<<number1; cout<<" The Value of number2 = "<<number2; } 4. Write the output of the following program. #include <iostream> using namespace std; int main () { int number1 = 45; float number2 = 75.25; cout<<"The Value of number1 = "<<number1<<" The Value of number2 = "<<number2; } 5. Write a C++ program to input two integer numbers from the keyboard. Extract the two integer numbers by using two separate cin statements and display the numbers on the screen. 6. Modify the above program to extract the two integer numbers by using only one cin statement and display the numbers of the screen. 7. Write a C++ program that accepts your first name and the second name and display the full name on the screen. 8. Write a C++ program that accepts the following line and text and display the line on the screen. “This is my second tutorial class of CPT111” 9. Write a C++ program to accept 000015 from the keyboard and convert the string to an...

Words: 256 - Pages: 2

Free Essay

Cmis 102 Hw 4

...used throughout the program. */ Subprogram Input_Data(Number1 As Ref, Number2 As Ref) // Display the message to user Write “Input the length: ” // Get the value from user Input Number1 // Display the message to user Write “Input the width: ” // Get the value from user Input Number2 End Subprogram // Subprogram Calculate_Area /* In this function, area of rectangle is calculated. Length and width are passed as first two parameters of function. They are passed by value to the function. Variable Area is passed as third parameter to function. It is passed by reference to the function. Hence, the value of Area set in this function will be used throughout the program */ Subprogram Calculate_Area (Number1, Number2, Number3 As Ref) //Declare variable Set Number3= Number1 * Number2 End Subprogram // Subprogram Calculate_Perimeter // Calculates Perimeter using formula 2 * ( length + width) /* In this function, perimeter of rectangle is calculated. Length and width are passed as first two parameters of function. They are passed by value to the function. Variable Perimeter is passed as third parameter to function. It is passed by reference to the function. Hence, the value of Perimeter set in this function will be used throughout the program */ Subprogram Calculate_ Perimeter (Number1, Number2, Number3 As Ref) //Declare variable Set Number3= 2 * ( Number1 + Number2) End Subprogram //  Subprogram......

Words: 1160 - Pages: 5

Premium Essay

Mgt Case Study Number1

...This case study focuses on a predicament of an increased turnover .high standards are set in the organization regarding production and functioning , yet they could not retain employees. The chain of command in the organization sets the line foremen in charge of monitoring the hourly workers. The lost elements of authority and respect between the two different positions forms a tense work environment .Bellingham mentioned ( as cited in Skinner, W.& Beckham, H (2008) ) " they feel that their contributions are undervalued and their concerns ignored "(P.4,para.7). Problem: The employed line foremen are not experienced enough nor trained sufficiently to monitor and supervise .The general advisor Herb Adams stated ( as cited in Skinner, W.& Beckham, H (2008) ) "They have to keep their eyes open for trouble makers and let them know who is boss"(P.5,para.4). Which clarifies the lack of required skills. Opportunity: Employees will know where they stand and what is expected from them . As cited in Skinner, W.& Beckham, H (2008),Bellingham stated that there are the two factors used by supervisors to judge the employees " their ability to meet or exceed forecasts, and how they manage and train their hourly workers"(p.6,para2). Recommendation: further training may not be effective immediately , yet their skills stretch to an extent that fulfills the requirements of the job in some time (Ekaterini Galanou, 2009). The trainee program will boost their knowledge, and will......

Words: 346 - Pages: 2

Free Essay

Java Array

...Java provides a data structure, the array, which stores a fixed-size sequential collection of elements of the same type. An array is used to store a collection of data, but it is often more useful to think of an array as a collection of variables of the same type. Instead of declaring individual variables, such as number0, number1, ..., and number99, you declare one array variable such as numbers and use numbers[0], numbers[1], and ..., numbers[99] to represent individual variables. This tutorial introduces how to declare array variables, create arrays, and process arrays using indexed variables. Declaring Array Variables: To use an array in a program, you must declare a variable to reference the array, and you must specify the type of array the variable can reference. Here is the syntax for declaring an array variable: ------------------------------------------------- dataType[] arrayRefVar; // preferred way. ------------------------------------------------- ------------------------------------------------- or ------------------------------------------------- ------------------------------------------------- dataType arrayRefVar[]; // works but not preferred way. Note: The style dataType[] arrayRefVar is preferred. The style dataType arrayRefVar[] comes from the C/C++ language and was adopted in Java to accommodate C/C++ programmers. Example: The following code snippets are...

Words: 1665 - Pages: 7