Premium Essay

Lamson Corporation Case

In: Business and Management

Submitted By ashrhal
Words 532
Pages 3
Table of Content

|ITEM |Page Number |
|Executive Summary……………………………………………………………………………………………….. |3 |
| Introduction…………………………………………………………………………………………………………… |4 |
|Operations Model and case analysis……………………………………………………………………… |5 |
|Case criticism………………………………………………………………………… |6 |
|Recommendations.……………………………………………………………………………………………… |7 |
| | |

1- Executive Summary

➢ The Aim of that report is studding Lamson corporation Plant

➢ Though certain game analysis to keep the total costs incurred over 12 periods to the minimum

➢ The main objective is to decide would it be cheaper in the long run to incur overtime costs , inventory carrying costs or stock out cost or is it impossible to avoid all 3 costs

2- Introduction

➢ Lamson Corporation is large multi plant of sewer pipe.

➢ Lamson is producing 13 different types of tiles, but we will focus on 2 sizes 18” and 36”

➢ Production Forecast for each type and size of tiles is performed every 2 weeks (2 period / Month).

➢ Lamson planning decisions depend on some factors such as sales trend, time of the…...

Similar Documents

Premium Essay

Advance Fuel Corporation Case

...Advanced Fuels Corporations Financial Analysis and Forecasting Wai Wai Yung Wing Man Tsoi Introduction: Advanced Fuels Corporation (AFC) was founded five years ago by Dr. Zachary Aplin. In the fourth year of research he and his two –member staff made a major break-through that can convert grain waste products into ethanol which can mix with gasoline to produce a better burning automobile fuel. Producing ethanol from waste products would lower its cost dramatically so the market potential of the blended fuel would be increased. After AFC receiving a patent for Dr. Aplin’s unique ethanol production process he decided to broaden the scope of operations of the company but he doesn’t have additional funds to put in. So, he developed a business plan to seek for financing. AFC will need $55 million in total. Assume you are a commercial loan officer with a large regional bank: We would consider the type of business and financial statues of AFC, history of past banking involvement in deciding what types of financing to provide to a company as the bank definitely don’t want the loan to default. In the case of AFC, it is still in a very early stage of the formation of the business so we can’t really tell the revenue of it and it is impossible to be breakeven in a few years. We don’t have much banking history to refer to as AFC is just five years old. The company is still developing. The chance of it going bankruptcy would be relatively high. First of all, long-term......

Words: 4701 - Pages: 19

Premium Essay

Stryker Corporation Case Study

...Stryker Corporation Case Study Stryker Corporation Case Study Andrew Wyatt Brett Nymeyer Brett Sundberg Josh Ihnen Executive Summary It is 2003 and Stryker Corporation is proposing to build a new facility that would be able to produce a key component (printed circuit boards) in-house instead of outsourcing that activity to suppliers. Currently, Stryker purchases PCBs from a small number of contract manufacturers but recently the suppliers have been underperforming in quality and delivery. The proposed plan would create a high degree of control over this product, ensure quality, and create an economy of scale in the long run. However, this plan also required the most capital outlay in both money and resources. The project would have an initial investment of a new building, capital equipment, and IT infrastructure totaling $6,287,258. However, there would also be cost savings in the long run from decreased purchases from suppliers even after the increased expense of Stryker’s manufacturing costs. To find out if this project offered an adequate return on investment we performed a Net Present Value Analysis and also calculated Internal Rate of Return and Payback Period for years 2003 through 2009. Analysis 1. Does this project make sense? We like the insourcing proposal and think that it makes business sense for several reasons. However, these reasons are based off of the information taken from the case before we analyzed NPV, IRR, or......

Words: 315 - Pages: 2

Premium Essay

Case - Swisher System Corporation

...I. Company Background: Swisher Systems Corporation (SSC) is an industrial heating company which was established in 1949. SSC is an innovator of flexible heating products, especially with its knit and braided heating element. The heating element is multi-stranded resistance wire that is knit and braided with fibreglass and is the base technology for almost all SSC products. SSC is known in the industry as being the highest quality flexible heat supplier which produces control devices and heating cable. SSC’s competitive advantage is on the quality products which maintains higher and safer temperature that are more flexible than their competitors or other products in the market. II. Facts of the Case: A. Mike Watkins  Director of Purchasing for Swisher Systems Corporation  Solely responsible for purchasing all materials of SSC.  Has various experiences in material management prior to SSC.  Has more than thirty-five (35) years of industrial purchasing experience. B. Products at Swisher Systems  All SSC products are solutions to industrial heating applications  SSC manufactures fifty percent (50%) standard products and fifty percent (50%) custom orders. o The custom products can be applied to virtually all industries that require heating products. Industries like semi-conductors, food processing, medical, petrochemical and others.  Biggest contributor of SSC’s sales is the cloth heating jacket, though expensive compared to its competitors. The...

Words: 1418 - Pages: 6

Premium Essay

Mcdonald's Corporation Case Analysis

...McDonald’s Corporation Case Analysis McDonald’s has made great strides in the sustainability of its supply chain over the past few decades. From a moratorium on soya coming from farms where Amazon rain forests have been destroyed, to developing sustainable fishery guidelines to manage fish quality and quantity, McDonald’s has taken great efforts to “do the right thing” [1]. This commitment to environmental sustainability has impacted how they source from suppliers and manage supply chain management initiatives. With all that McDonald’s has done, there is still room for improvement. Engagement in sustainability efforts with suppliers has generally resulted from a call for change from activists who were negatively impacting brand trust. Acting in the best interest of society by providing healthy food alternatives to well-informed consumers also play a vital role in how the sustainable supply chain is managed. As such, the core problem facing McDonald’s green supply chain management infrastructure is that it is still reactive in nature and will always require a trade-off between societal benefit and cost minimization. One alternative to consider is for McDonald’s to become more proactive at anticipating and managing emerging issues prior to a large-scale publicity and exposure. By doing so, McDonald’s can approach NGOs and interest groups with emergent problems, using the collaborative expertise to resolve potential hotspots before they erupt. This approach......

Words: 856 - Pages: 4

Premium Essay

Nucor Corporation Case Ppt

...production (MnT) Employees Sales (Mn $) Net earnings (Mn $) 1972 6 0.2 0.14 1,820 83.5 4.6 1976 8 0.6 0.56 2,300 175.7 8.6 1981 13 1.7 1.3 3,700 544.8 34.7 1986 16 2.1 1.7 4,400 755.2 46.4 Competitors of Nucor in Minimill sector 1 2 3 4 5 6 Organization Capacity North Star 2.4 MT Nucor 2.1 MT Nothwestern steel and wire Corporation 1.8 MT Florida Steel Corporation 1.6 MT Chaprral 1.1 MT Others (31 companies) 12 MT Sustenance Continual development on process improvement Achieve good quality Speedy implementation of improvements as the mini mill machineries have limited life. Key indicators for growth A sustained growth was achieved in 10 yrs period from1976 to 1986. Derived targets for the year1991 & 1996 to Strategize (targeting consistent y-o-y growth of 12%) Current Installed Capacity Steel Production Revenue 2.1 Mn T 1.7 Mn T 755 Mn $ Target ’91 3.7 Mn T 3.0 Mn T 1,400 Mn $ Target ’96 6.5 Mn T 5.3 Mn T 2,900 Mn $ Decision Point Key decision point: Whether to invest in the Thin Slab casting technology developed by SMS or not. Considerations around this decisions are: ◦ Will there be any benefit of being first mover? ◦ What in case competition increases suddenly, giving rise to scrap prices? ◦ Requirement of different skill sets for flat-rolled products. ◦ Probability of integrated mills quickly adopting CSP technology, based on relevant expertise. ◦ Difficulty to target high end products market, and price-war in the low end market segment ◦ Resource......

Words: 808 - Pages: 4

Premium Essay

Case Circuit Board Corporation

...Case Circuit Board Corporation Background of the case Circuit Board Corporation (CBC) designs and manufactures printed circuit boards (PCB’s). Dieter Adams had started CBC in 1961 during the early days of the computer industry. His first contract was to design and manufacture PCB’s for the early minicomputer companies. Maggie Adams, his wife, was a part-time employee at the time. The market was divided into three distinct product segments by functionality. In 2001 the three product segments were: * Low-End Segment: for simple applications requiring one- to four-layer boards * Mid-Range Segment: for more complex applications requiring 12- to 24-layer boards * High-End Segment: for the most complex applications, requiring 30- to 50-layer boards In 2000 industry analysts placed total bookings for PCB production worldwide at approximately 30 billion, with the U.S. market comprising about a third of that dollar volume. The company was profitable at 30 million in sales, making 1,2 million pre-tax. Dieter Adams hired Ben Cashman as President and COO of the company. R.I.P. Dieter Adams † Maggie Adams had gone from being a part-time employee and secretary of the board to running the company. What is the real problem in the case? † Dieter Adams; Maggie was now left in complete of charge of the company and getting difficult and conflicting advice. In January 2001, the high-tech industry imploded. Most companies in the printed circuit-board industry had reported...

Words: 1029 - Pages: 5

Free Essay

Fedex Corporation Case Study

...FedEx Corporation Case Study Jama Eddleman Mid-Continent University HRM 6003 Professor: Dr. J. Gordon July 14, 2013 FedEx Corporation Case Study Mixing up the order my papers usually proceed in, I am putting my Biblical worldview first, instead of at the end. There are many organizations and companies today that do not operate as God instructs. The Lord is clear in explaining how to operate a business and how to be a good employee. His instructions for the business world, as with all Christian instruction for our whole lives, is found in the Bible. B – basic; I –information; B – before; L – leaving; E – earth. I found this anagram years ago on a church bulletin board. The scripture I like in regard to this case study and how FedEx tries to honor its employees and remain dedicated to their needs comes from Micah. Verse 6:8 says, “He has showed you, O man, what is good. And what does the Lord require of you? To act justly and love mercy and to walk humbly with your God” (NI V). FedEx appears to be a company that works hard to be just, merciful, and walk humbly. FedEx leaders know that the company would not be where it is today without good employees, and they strive to do all they can to take care of their employees. FedEx is a brand name known both nationally and worldwide. FedEx began under the name Federal Express. The firm initially specialized in overnight package delivery via air cargo. While the name, size, and services the company offers have......

Words: 1152 - Pages: 5

Premium Essay

Cup Corporation Case Study

...INTRODUCTION: CASE BACKGROUND & ISSUES CUP Corporation was one of the largest insurance firms based in Europe. It had a worldwide operation and was recently acquired by another major insurance company. The firm had made a series of acquisitions to broaden the types of insurance offerings and expanding the market needs. It sold a various forms of insurance in the health, life, casualty, property and automotive areas. Customer segments of the firm’s services are divided into two groups of agents and brokers as well as end-customers. Over the last couple of years, the growth of premium income in German industry is somewhat instable. The declining growth rates had affected German insurance industry due to some reinforcing trends: 1) Worse economic climate such as increasing economic downsizing, increasing unemployment and fluctuations in real income. 2) Higher taxes and social welfare levies. 3) Increasing competition resulting from the deregulation of the European market. 4) Extensive satisfaction of the demand for insurance in German. CUP Corporation had enjoyed remarkable growth despite economic downturns. However, the increasing competition and increasing client price sensitivity in the private insurance market has led to the shorter contracts and more cancellation of existing contracts among customers that is varied by the intensity of the products. Particularly, CUP Corporation is facing some problems regarding to the customer loyalty as...

Words: 2989 - Pages: 12

Free Essay

Indian Oil Corporation Case

...Indian Oil Corporation Case The case discussed Indian Oil Corporation (IOC), which ranking 18th in top petroleum corporations and 105th in largest corporations globally with a tuner over of more than 48 billion Euros. The case discussed in detail IOC’s problem in profit decline due to borrowing money and line of credit issues. The case reveled the root and causes of these problems, which turned out to be the intervention of the Indian Government through its subsidies policy. These subsidies adjusted oil prices to suit the general public regardless of how it may negatively affected the oil corporations. General environment’s seven segment include: Economic, Physical, Sociocultural, Global, Technological, Political/Legal, and demographic. Economic segment includes: inflation rates, interest rates, trade deficits or surplus, budgeting deficits or surplus, personal savings rate, business saving rate, and gross domestic product (GDP). Physical segment incorporates: natural resources (finite supply), sustainable technologies, advocacy groups, increasing demand (conflict of interest), waste reduction, and environmental risk management. Sociocultural segment includes: women in the workplace, workforce diversity, attitudes about the quality of work life, concerns about the environment, shifts in work and career preferences, and shift in preferences regarding product and services characteristics. Global segment: important political events, critical global markets, newly......

Words: 855 - Pages: 4

Premium Essay

Case Study: the Crossby Corporation

...Case Study: “Crosby Manufacturing Corporation”, PMCS * Write a brief synopsis This case study deals with the Crosby Manufacturing Corporation. The president (Wilfred Livingston) of the company realized that they were losing their competitive edge due to their out-dated management cost and control system. When Wilfred became president he had two major phases he wanted to implement; 1) Employee reorganization 2) an improved MCCS policy. To initiate the latter phase, Wilfred called a meeting with department managers from project management, cost accounting, MIS, data processing, and planning. He expressed how the current system was not sufficient and capable of supporting the company. The managers weighed in with appropriate lists, preliminary schedules, suggestions and opinions that were valid. Wilfred also added that he was going to appoint Tim Emary as project manager due to his wealth of knowledge pertaining to planning. * Did Livingston make any mistakes initially? How do you think the functional employees feel? Are there other alternatives? I do not think Livingston made any mistakes initially? When he became president one of the company’s goals was to obtain large government contracts. Wilfred knew that government agencies preferred companies with customer focal point policy and that the matrix structure provided that policy. I believe the functional employees didn’t like the restructuring that occurred when Wilfred became president. The average person does......

Words: 308 - Pages: 2

Premium Essay

Stryker Corporation Case Study

...Stryker Corporation Case Study Andrew Wyatt Brett Nymeyer Brett Sundberg Josh Ihnen Executive Summary It is 2003 and Stryker Corporation is proposing to build a new facility that would be able to produce a key component (printed circuit boards) in-house instead of outsourcing that activity to suppliers. Currently, Stryker purchases PCBs from a small number of contract manufacturers but recently the suppliers have been underperforming in quality and delivery. The proposed plan would create a high degree of control over this product, ensure quality, and create an economy of scale in the long run. However, this plan also required the most capital outlay in both money and resources. The project would have an initial investment of a new building, capital equipment, and IT infrastructure totaling $6,287,258. However, there would also be cost savings in the long run from decreased purchases from suppliers even after the increased expense of Stryker’s manufacturing costs. To find out if this project offered an adequate return on investment we performed a Net Present Value Analysis and also calculated Internal Rate of Return and Payback Period for years 2003 through 2009. Analysis 1. Does this project make sense? We like the insourcing proposal and think that it makes business sense for several reasons. However, these reasons are based off of the information taken from the case before we analyzed NPV, IRR, or Payback Period, so they......

Words: 1255 - Pages: 6

Premium Essay

Stryker Corporation Case

...Stryker Corporation Deciding whether to keep outsourcing or in-source PCBs Stryker Corporation has 3 different options regarding the supply of needed PCBs. Option 1: contemplates the fact of keeping the same suppliers but with significant changes in order to assure continuous supply of PCBs and quality. No investment is needed. Option 2: establishing a partner with a single supplier. This way there would be a sole supplier for Stryker established in a new facility near them, this would give more certainty and control over continuous supply and quality standards. Again, no investment is needed. Option 3: in-source the PCB’s, there is a project for investing and owning a plant for producing their own PCB’s, this way they would assure a continuous supply and have 100% control over quality standards. In this case, there is a big amount of capital that should be invested, which is needed to be analyzed in order to see whether it is viable for the company or not. The case present several information regarding expected production costs for in-sourcing and expected purchases for outsourcing. Since there is no projected information of Income Statement, then the only cash flow analysis that can be made is by comparing the efficiency gained by in-sourcing the PCBS compared to the costs of keep buying the PCBs. The case contemplates the projected comparison from 2004 to 2009 of the costs of buying PCBs from an external supplier and the costs of making the PCBs. What we will......

Words: 340 - Pages: 2

Premium Essay

Case Study : Norman Corporation

...CASE STUDY: NORMAN CORPORATION Case 8-1: Question 1 1. Female employees sued the company for $250,000.  Large number of similar suits had been filed in other companies but results are varied. Norman outside counsel thought the company probably would win the suit but pointed out that decisions thus were divided and it was difficult to forecast the outcome.  No provision had been made in financial statements. Answer: The transaction should be recognized based on the following points: i. ii. Conservatism concept stated that expenses should be recognized as soon as they are reasonably possible to occur. According to loss contingency, a liability is recognized when information available indicates that it is probable for a liability to occur and when the amount of loss can be reasonably estimated. Therefore, Norman should provide a provision for loss and recorded the transaction as a liability and an expense. The journal entries would be as follow: Dr. Cr. Lawsuit Loss Lawsuit Liability $250,000 $250,000 Lawsuit Loss will be recorded in Income Statement under Non-operating Expenses while Lawsuit Liability will be recorded in Balance Sheet under Current Liabilities (as the trial will be held on 2011). 2. Second lawsuit: Customer was injured by one of the company’s products.     Customer asked for $500,000 damage. After discussion with customer’s attorney, Norman’s attorney believed that the suit could be settled for $50,000 (no guarantee). If the suit went to...

Words: 1345 - Pages: 6

Free Essay

American Chemical Corporation Case

...American Chemical Case The American Chemical Corporation wanted to buy any and all shares of the Universal Paper Corporation because of their combined efforts in the production of sodium chlorate. To do so without violating the Clayton Act, American agreed to sell their Collinsville production plant to Dixon Corporation. Dixon wants to buy the Collinsville plant to help diversify its specialty chemical product line. This plant initially cost 12 million dollars with an additional 2.25 million dollars needed to buy laminate technology to increase efficiency and profitability of the plant in order. Cash flow analysis with and without the laminate technology will show whether or not Dixon should go further with purchasing the plant. The cost of equity can be calculated as follows. In the case, the yield on Treasury bonds is 9.5%, which is assumed to be the risk free rate. Using a historical equity risk premium 8.4%, the CAPM method says the cost of equity for this project is 9.5%+1.38*8.4% = 21.26%. Since little information about Dixon’s debt is provided in the case, I assumed that all debt Dixon intends to borrow is used in the acquisition of Collinsville plant at 11.25%. We also assume that debt is issued at par. The after-tax cost of debt is (1-0.48)*11.25% = 5.85%. Dixon’s target level of debt-to-asset ratio is 35%, which is used to find the cost of capital: WACC = D/V*After-tax cost of debt + E/V*Cost of equity = 0.35*5.85%+0.65*21.26% = 15.87%. Calculating NPV......

Words: 498 - Pages: 2

Premium Essay

Haveloche Corporation Case

...Financial Analysis of Haveloche Corporation Haveloche Corporation is a research and development company, which translates into sporadic cash flows over time. There are times when genius ideas bring in lots of cash flow for the company. But there are also times where those genius ideas are shelved because no one has an interest in that patent. The ever changing cash flows prove to be difficult for decision making, especially when it comes to whether the company should give back to its investors or not. Haveloche is constantly faced with the predicament of deciding what dividend policy is best for the organization and the investors. The company’s CEO listed the stock prices and dividends for us to take a look at, so let us do just that. Below are the two scatter plots created from the information given in the case. The first scatter plot charts the dividend and the stock price. As you can see from the scatter plot, there is no obvious correlation between the two. The dividend does not necessarily move in the same direction or the opposite direction of the stock price. The second scatter plot charts the change in the stock price with the dividend. As you can also see with this scatter plot, there is no real correlation between these two. There are 3 theories of investor preference for dividend versus capital gains: (1) Dividend Irrelevance Theory or Modigliani Miller (2) “Bird-in-the-hand” Theory (3) Tax Preference Theory. According to Modigliani......

Words: 719 - Pages: 3