Free Essay

Industry Life Cycle

In: Business and Management

Submitted By lixwh1
Words 3012
Pages 13
Industry Life Cycle

Evidence on entry, exit, firm survival, innovation and firm structure in new industries is reviewed to assess whether industries proceed through regular cycles as they age. A leading depiction of the evolution of new industries, the product life cycle, is used to organize the evidence it is shown that the product life cycle captures the way many industries evolve through their formative eras, but regular patterns occur when industries are mature that are not predicted by the product life cycle. Regularities in entry, exit, firm survival and firm structure are also developed for industries whose evolution departs significantly from the product life cycle.

Definition of 'Industry Lifecycle'
A concept relating to the different stages an industry will go through, from the first product entry to its eventual decline. There are typically five stages in the industry lifecycle. They are defined as:
i. Early Stages Phase - alternative product design and positioning, establishing the range and boundaries of the industry itself.
Ii.Inovation Phase - Product innovation declines, process innovation begins and a "dominant design" will arrive. iii. Cost or Shakeout Phase - Companies settle on the "dominant design"; economies of scale are achieved, forcing smaller players to be acquired or exit altogether. Barriers to entry become very high, as large-scale consolidation occurs. iv. Maturity - Growth is no longer the main focus, market share and cash flow become the primary goals of the companies left in the space.
v. Decline - Revenues declining; the industry as a whole may be supplanted by a new one.
Industry Life Cycle Analysis
A form of fundamental analysis involving the process of making investment decisions based on the different stages an industry is at during a given point in time. The type of position taken will depend on firm specific characteristics, as well as where the industry is at in its life cycle.
Under the production and market introduction phases, revenues and earnings are likely to be very low, which makes investments during these phases more speculative in nature. Revenues and earnings are likely to be low because there is little demand for the product, or the product is not completed. Expenses are likely to be very large during these phases as a company or industry spends a lot on marketing and research.

Through the growth phase, revenues and margins are likely to be on the rise due to an increase in demand for a product and the pricing power the firm has due to a small number of competitors. Stock prices are likely to rise during this phase.

During the maturity and stability phase, revenues and margins are likely to decline due to lower sales demand and more competition. Stock prices are likely to decline during these phases.

Life cycle models are not just a phenomenon of the life sciences. Industries experience a similar cycle of life. Just as a person is born, grows, matures, and eventually experiences decline and ultimately death, so too do industries and product lines. The stages are the same for all industries, yet every industry will experience these stages differently, they will last longer for some and pass quickly for others. Even within the same industry, various firms may be at different life cycle stages. A firms strategic plan is likely to be greatly influenced by the stage in the life cycle at which the firm finds itself. Some companies or even industries find new uses for declining products, thus extending their life cycle.
The growth of an industry's sales over time is used to chart the life cycle. The distinct stages of an industry life cycle are: introduction, growth, maturity, and decline. Sales typically begin slowly at the introduction phase, then take off rapidly during the growth phase. After leveling out at maturity, sales then begin a gradual decline. In contrast, profits generally continue to increase throughout the life cycle, as companies in an industry take advantage of expertise and economies of scale and scope to reduce unit costs over time
In the introduction stage of the life cycle, an industry is in its infancy. Perhaps a new, unique product offering has been developed and patented, thus beginning a new industry. Some analysts even add an embryonic stage before introduction. At the introduction stage, the firm may be alone in the industry. It may be a small entrepreneurial company or a proven company which used research and development funds and expertise to develop something new. Marketing refers to new product offerings in a new industry as "question marks" because the success of the product and the life of the industry is unproven and unknown.
A firm will use a focused strategy at this stage to stress the uniqueness of the new product or service to a small group of customers. These customers are typically referred to in the marketing literature as the "innovators" and "early adopters." Marketing tactics during this stage are intended to explain the product and its uses to consumers and thus create awareness for the product and the industry. According to research by Hitt, Ireland, and Hoskisson, firms establish a niche for dominance within an industry during this phase. For example, they often attempt to establish early perceptions of product quality, technological superiority, or advantageous relationships with vendors within the supply chain to develop a competitive advantage.
Because it costs money to create a new product offering, develop and test prototypes, and market the product, the firm's and the industries profits are usually negative at this stage. Any profits generated are typically reinvested into the company to solidify its position and help fund continued growth. Introduction requires a significant cash outlay to continue to promote and differentiate the offering and expand the production flow from a job shop to possibly a batch flow. Market demand will grow from the introduction, and as the life cycle curve experiences growth at an increasing rate, the industry is said to be entering the growth stage. Firms may also cluster together in close proximity during the early stages of the industry life cycle to have access to key materials or technological expertise, as in the case of the U.S. Silicon Valley computer chip manufacturers.
Growth
Like the introduction stage, the growth stage also requires a significant amount of capital. The goal of marketing efforts at this stage is to differentiate a firm's offerings from other competitors within the industry. Thus the growth stage requires funds to launch a newly focused marketing campaign as well as funds for continued investment in property, plant, and equipment to facilitate the growth required by the market demands. However, the industry is experiencing more product standardization at this stage, which may encourage economies of scale and facilitate development of a line-flow layout for production efficiency.
Research and development funds will be needed to make changes to the product or services to better reflect customers' needs and suggestions. In this stage, if the firm is successful in the market, growing demand will create sales growth. Earnings and accompanying assets will also grow and profits will be positive for the firms. Marketing often refers to products at the growth stage as "stars." These products have high growth and market share. The key issue in this stage is market rivalry. Because there is industry-wide acceptance of the product, more new entrants join the industry and more intense competition results.
The duration of the growth stage, as all the other stages, depends on the particular industry or product line under study. Some items—like fad clothing, for example—may experience a very short growth stage and move almost immediately into the next stages of maturity and decline. A hot toy this holiday season may be nonexistent or relegated to the back shelves of a deep-discounter the following year. Because many new product introductions fail, the growth stage may be short or nonexistent for some products. However, for other products the growth stage may be longer due to frequent product upgrades and enhancements that forestall movement into maturity. The computer industry today is an example of an industry with a long growth stage due to upgrades in hardware, services, and add-on products and features.
During the growth stage, the life cycle curve is very steep, indicating fast growth. Firms tend to spread out geographically during this stage of the life cycle and continue to disperse during the maturity and decline stages. As an example, the automobile industry in the United States was initially concentrated in the Detroit area and surrounding cities. Today, as the industry has matured, automobile manufacturers are spread throughout the country and internationally.
Maturity
As the industry approaches maturity, the industry life cycle curve becomes noticeably flatter, indicating slowing growth. Some experts have labeled an additional stage, called expansion, between growth and maturity. While sales are expanding and earnings are growing from these "cash cow" products, the rate has slowed from the growth stage. In fact, the rate of sales expansion is typically equal to the growth rate of the economy.
Some competition from late entrants will be apparent, and these new entrants will try to steal market share from existing products. Thus, the marketing effort must remain strong and must stress the unique features of the product or the firm to continue to differentiate a firm's offerings from industry competitors. Firms may compete on quality to separate their product from other lower-cost offerings, or conversely the firm may try a low-cost/low-price strategy to increase the volume of sales and make profits from inventory turnover. A firm at this stage may have excess cash to pay dividends to shareholders. But in mature industries, there are usually fewer firms, and those that survive will be larger and more dominant. While innovations continue they are not as radical as before and may be only a change in color or formulation to stress "new" or "improved" to consumers. Laundry detergents are examples of mature products.
Decline
Declines are almost inevitable in an industry. If product innovation has not kept pace with other competing products and/or service, or if new innovations or technological changes have caused the industry to become obsolete, sales suffer and the life cycle experiences a decline. In this phase, sales are decreasing at an accelerating rate. This is often accompanied by another, larger shake-out in the industry as competitors who did not leave during the maturity stage now exit the industry. Yet some firms will remain to compete in the smaller market. Mergers and consolidations will also be the norm as firms try other strategies to continue to be competitive or grow through acquisition and/or diversification.
Management efficiency can help to prolong the maturity stage of the life cycle. Production improvements, like just-in-time methods and lean manufacturing, can result in extra profits. Technology, automation, and linking suppliers and customers in a tight supply chain are also methods to improve efficiency.
New uses of a product can also revitalize an old brand. A prime example is Arm & Hammer baking soda. In 1969, sales were dropping due to the introduction of packaged foods with baking soda as an added ingredient and an overall decline in home baking. New uses for the product as a deodorizer for refrigerators and later as a laundry additive, toothpaste additive, and carpet freshener extended the life cycle of the baking soda industry. Promoting new uses for old brands can increase sales by increasing usage frequency. In some cases, this strategy is cheaper than trying to convert new users in a mature market.
To extend the growth phase as well as industry profits, firms approaching maturity can pursue expansion into other countries and new markets. Expansion into another geographic region is an effective response to declining demand. Because organizations have control over internal factors and can often influence external factors, the life cycle does not have to end.
An example is feminine hygiene products. Sales in the United States have reached maturity due to a number of external reasons, like the stable to declining population growth rate and the aging of the baby boomers, who may no longer be consumers for these products. But when makers of these products concentrated on foreign markets, sales grew and the maturity of the product was prolonged. Often so-called "dog" products can find new life in other parts of the world. However, once world saturation is reached, the eventual maturity and decline of the industry or product line will result.
LIFE CYCLES ARE EVERYWHERE
Just as industries experience life cycles, studies have documented life cycles in many other areas. Countries have life cycles, for example, and we traditionally classify them as ranging from the First World countries to Third World or developing countries, depending on their levels of capital, technological change, infrastructure, or stability. Products also experience life cycles. Even within an industry, various individual companies may be at different life cycle stages depending upon when they entered the industry. The life cycle phenomenon is an important and universally accepted concept to help managers better understand sales growth and change over time.

One of the main tenets of how firms and industries evolve is that, as some businesses mature, the basis of competition shifts from product innovation to process innovation (Utterback and Abernathy 1975; Utterback and Suarez 1993; Utterback 1994; Klepper 1996), For example, the model initially proposed by Utterback and Abernathy in 1975, holds that, early after the birth of a new industry, firms compete based upon product differentiation, investing heavily in developing new product features and determining what consumers want. But, as the market matures and customer needs become more defined, firms may shift their focus to competing on cost and economies of scale, investing more heavily in manufacturing and other processes in order to make production operations more specialized and efficient. This product-process lifecycle model does not hold for all industries or firms; it seems to apply more to manufacturing settings where “dominant designs” or product standards emerge, and where competition then shifts to price (Utterback 1994). Sometimes a technological discontinuity interrupts this maturation process and the cycle starts over again . In addition, as we have seen in industries such as automobiles, some firms may focus on process innovation as a source of competitive advantage (for example, Toyota) while other firms choose a different strategy and continue to focus on design innovation (for example, BMW). Nonetheless, this stylized lifecycle model has become an important framework in management literature to help us think about what strategies and investments companies should emphasize at different periods in their evolution and in different competitive environments.

Based on recent research, we argue in this paper that the product-process lifecycle model is incomplete in that we see an increasing number of firms in many industries that seem to move on to an additional, third phase: a period where their emphasis, as indicated by the major source of revenues or profits or both, shifts to services. Figure 1 reflects our proposal; we have added a services curve (dotted line) to the well-known products- process curves originally proposed by Utterback and Abernathy (1975). Much of the evidence to support our claim comes from studies conducted after the original industry lifecycle theory was proposed in an area of research known as “service management”. Several authors in this area of research have noted the increasing importance of the service sector in most industrialized nations . Others have looked at the advantages of focusing on services and the differences between service firms and manufacturing firms . However, to our knowledge, no author so far has explicitly linked the emergence of services to the industry lifecycle.

Shifting a firm’s strategic focus due to changes in the environment can be a major challenge but also have important competitive benefits. For instance, a successful ransition from products to processes requires firms to change their organizational structure and acquire new capabilities (Utterback and Abernathy, 1978). At the same time, a successful shift from a focus on product innovation to process innovation appears to affect firm survival (Suarez & Utterback, 1995). Likewise, an additional shift towards services suggests that, as an industry matures, firms cannot simply focus on cost-base competition as prevailing lifecycle theories suggest. Maintaining low costs through efficient processes is still important in the proposed third phase of the industry lifecycle, but companies might also want to acquire service-related capabilities, particularly if these become important to competition and feed directly into an enhanced business model that includes service revenues. IBM, for example, targeted services under new CEO Lou Gerster and then saw this part of its business rise from 23 percent of revenues in 1992 to 52 percent in 2005. The story of IBM is particularly well-known, but it is only one of an increasing number of examples in computer software and hardware as well as other industries (IBM, 2005).In line with previous research, attempting a transformation from processes to services seems to be challenging as well, as the new capabilities in services often differ significantly from traditional production capabilities .

Proponents of services have considered the rise of services as an overall trend in the economy. The advent of the post-industrial economy has resulted in an increased importance of services in most sectors of the economy over time, even in manufacturing sectors (Quinn, 1992). Services are increasingly representing a larger proportion of gross domestic product in all advanced economies. While this general trend is indisputable, we argue here that the role of services within an industry can be better understood by applying the lenses of industry lifecycle (Abernathy & Utterback, 1978). Industry lifecycle theory has long postulated that industries evolve through distinct phases and that each phase is associated with different basis of competition at the firm level. However, the industry lifecycle literature has focused on products and processes and has largely ignored services. Introducing services into the industry lifecycle model requires an understanding of how services relate to the different stages of industry evolution, and to potential shifts in the basis of competition as an industry evolves.…...

Similar Documents

Premium Essay

The Product Life Cycle and Customer Life Cycle

...The Product Life Cycle A product's life cycle (PLC) can be divided into several stages characterized by the revenue generated by the product. If a curve is drawn showing product revenue over time, it may take one of many different shapes, an example of which is shown below: Product Life Cycle Curve The life cycle concept may apply to a brand or to a category of product. Its duration may be as short as a few months for a fad item or a century or more for product categories such as the gasoline-powered automobile. Product development is the incubation stage of the product life cycle. There are no sales and the firm prepares to introduce the product. As the product progresses through its life cycle, changes in the marketing mix usually are required in order to adjust to the evolving challenges and opportunities. Introduction Stage When the product is introduced, sales will be low until customers become aware of the product and its benefits. Some firms may announce their product before it is introduced, but such announcements also alert competitors and remove the element of surprise. Advertising costs typically are high during this stage in order to rapidly increase customer awareness of the product and to target the early adopters. During the introductory stage the firm is likely to incur additional costs associated with the initial distribution of the product. These higher costs coupled with a low sales volume usually make the introduction stage a period of negative......

Words: 2583 - Pages: 11

Premium Essay

Management Life Cycle

...The meaning of life (cycle) What is an asset lifespan? What do we mean when we say “life cycle”, and “whole life planning”? John Woodhouse, Chair of the Experts Panel for the IAM, has been addressing these issues in his role as representative for the UK on the ISO PC251 development of asset management standards (ISO 55000 family). Here, he outlines the issues and some of the options being considered. recognition of need through to disposal and any residual risks or liability period thereafter (“from lust to dust” – see figure 1). This proved a good catalyst towards “long-termism” and better consideration of asset requirements in the first place. And it certainly has helped to break down barriers between engineering design and projects, procurement, operations or asset usage, maintenance or asset care, and renewals or decommissioning. But what is optimal “life cycle asset management” for the assets that pass from one organisation to another – for example, buying and selling (see Figure 2 on page 10). Or, indeed, for which responsibility might be split, either functionally (such as construction T here is plenty of lively debate underway about the appropriate terminology and scope for such things as asset life cycles, whole lives and life cycle activities. At the simplest level, the principles are clear: for a discrete component – with a creation stage and a period of usage, leading to ultimate disposal – we have no problem with the concept of a life cycle. It becomes......

Words: 1561 - Pages: 7

Premium Essay

Life Cycle

...System Development Life Cycle This paper will begin with discussing the development of a custom application and the selection of proprietary systems. The system development life cycle has evolved over the years in response to changing scenarios and pattern shifts pertaining to the building or the inquiring of new software. The Life-Cycle has also gone through iterations of different names and a number of different steps (McMurtrey, 2013). The SDLC has been called one of the two dominant system development used today, along with prototyping (Piccoli, 2012). Many SDLC frameworks exist; however, most have four general stages which are planning and analysis, design, implementation, and support and evaluation (Wager & Lee, 2006). Each stage has tasks that need to be performed. The main focus of planning and analysis is the healthcare organizations strategy. Problems are identified and selected as opportunities for business improvement. Within this stage, the organization will determine whether a new system is needed and is the business financially able to invest in the development of this new system. If the business determines that the system is needed, it will need to determine the users of the system need and requirements. The business should get a system that will specifically help meet the goals of the company. The second stage is the design stage where the business considers all options ( (Wager, 2009). In this stage, alternative solutions to different problems are...

Words: 369 - Pages: 2

Free Essay

Investments : Industry Life Cycle

...Jorge Porres August 18, 2013 Investments Keiser University Week 3 Essays 1. Industry Life Cycle: Discuss the industry life cycle, how this concept can be used by security analysts, and the limitations of this concept for security analysis. The industry life cycle is made up of five stages: 1. Pioneer phase: This face is characterized by the high cost of production and the low demand of the product by the market. Mostly made up of start-ups. 2. Growth phase: When sales start to grow thanks to little competition. 3. Mature Growth phase: Companies begin to be affected by competition and as a result profit margins begin to diminish. 4. Stabilization /Maturity phase: this is typically the longest phase an industry will go thru, it is still affected by competition and starts growing by an average of the now fully created industry. 5. Deceleration / Decline phase: the falls in demand do to innovation in other products from other companies or industries. This life cycle can be effective to security analysis or to investors because they know when it is wise to invest, knowing that a company will grow, so will its market cap. It is not always 100% effective do that it is difficult to know when innovation will strike and one may not be prepared for the deceleration or decline phase. 2. P/E Ratio: The price/earnings ratio, or multiplier approach, may be used for stock valuation. Explain this process and describe how the "multiplier" varies from the one......

Words: 527 - Pages: 3

Premium Essay

Life Cycle Costing

...1.0 Life cycle costing (LCC) 1.1 Definition Life cycle costing is a cost management approach which includes all costs and ensures that all those costs are managed over the life cycle of the product. Product life cycle begins from conception of the product until its abandonment which can be referred as ‘from cradle to grave‘. Product life cycle has four stages: 1) Product planning and initial concept design It involves process of identifying any underlying conditions, assumption, limitations and constraints such as minimum asset performance, maximum capital costs that might restrict the range of acceptable options to be evaluated. It is a valuable reference for better decision whether the plan should be carried on. This includes the research and development cost market research costs. 2) Product design and development Starting from preparation of development contract until equipment is ready to be introduced to the business. It is also a stage where the factory trials take place. Cost of product design, prototyping, and market testing costs. 3) Production All the manufacturing costs related to producing the products such as direct material, labor, overhead and administrative costs will be incurred. 4) Distribution and customer (or logistical) support This stage is where product are sent to customers and ready to be used. All marketing, selling and distribution costs are incurred at this stage. As for logical support cost, it involves delivery and......

Words: 2824 - Pages: 12

Premium Essay

Product Life Cycle

...Life Cycle of a Product It is a generally accepted statement that 90% of the products we use today did not exist in their current form five years ago. Similarly, 90% of the products we will be using five years from now do not currently exist. Whether this statement is entirely accurate or not, we can all identify products that have changed from their original form and/or content. And, with today's rapid changes in technology, almost every product will undergo some sort of modification during its lifetime. This idea is demonstrated by the Product Life Cycle concept, which shows the path a typical new product takes from its inception to its discontinuation. To be precise, it describes the stages a product goes through from its introduction, through its growth until it is mature and then finally its decline. Moreover, it’s associated with changes in the marketing situation, thus impacting the marketing strategy & the marketing mix as well. Knowledge of the product’s life cycle can provide valuable insights into ways the product can be managed to enhance sales and profitability. Marketing activities are heavily dependent on the stage in the product life cycle. Products do not last forever. A typical cycle for a product is as follows: First a product will be developed. The prototype will be tested & market research carried out before it is launched onto the market. There will be no sales at this time. * In the introduction stage the product is launched in the......

Words: 1441 - Pages: 6

Premium Essay

Life Cycle Analysis of Milk

...vitamins A, B & D. The history of milk began in the Neolithic age (the new stone age), a time when humans started the transition from hunting and gathering to a more settled way of life. Life Cycle of Milk Supply Chain: Environmental and societal impact of Milk; The dairy industry poses a number of challenges to the health of the environment- * Methane emission- this is release from cows’ during the digestion process either by belching or flatulence. Statistics vary on how much methane an average dairy cow expels on a daily basis. Some experts say 100 liters to 200 liters, while others say it's up to 500 liters a day. This amount of methane is comparable to pollution expelled by a vehicle * Carbon emission- according to studies carried out by the U.S dairy carbon footprint study, it showed that carbon footprint of a gallon of milk is approximately 17.6 pounds of carbon dioxide equivalents. This will usually occur during milk freight and distribution. * Water pollution-Disposal of organic wastes without treatment leads to pollution of water resources hence, causing a rapid growth of microscopic algae that kill fishes and other aquatic life. Furthermore, ammonia released from manure can lease to acid rain causing environmental harm. * Land conversion - The dairy industry is also responsible for majority of land conversion, particularly in the tropics, to grow the feed required by dairy......

Words: 409 - Pages: 2

Premium Essay

Industry Life Cycle

...Industry Life Cycle Paula Baldridge Midway College BUS 411 August 24, 2014 Dr. Marla Ashe Abstract The purpose of this summary is to understand the concept of the industry life cycle and explore the implications in the process of designing business strategies. The authors of the article “GRA Decision Making Model for the Integrated Strategies of Life Cycle with Industrial Value Chain” familiarizes readers with evaluation models and analysis that has contributed to the development of business strategies fitted to the industry life cycle. Key words: industry life cycle, business strategies What is industry life cycle? Industry life cycle is stages (introduction, growth, shakeout, maturity, and decline) through which industries are believed to pass (Parnell, 2014). In this article, the authors use the concept of industry life cycle with the industrial value chain to propose an evaluation model to develop integrated strategies. The analytic hierarchic process and grey relational analysis is what forms the model can help decision makers to assess their integration strategies. Because of the competitive environment it is a necessary strategy for survival and development. For organizations to have successful business strategies they must be aware of where the industry stands in the industry life cycle. According to Huang, Chu & Chen, (2009) The AHP and GRA based decision-making model to construct an evaluation method can provide decision makers in PC......

Words: 449 - Pages: 2

Premium Essay

Life Cycle Costing

...INTRODUCTION Life cycle costing is an alternative approach to cost management which accumulates and manages cost over a product’s lie cycle (Adamany & Gonsalves, 1994; Artto, 1994; Susman, 1989). There are two important aspects to life cycle costing which is the focus on the product cost and the inclusion of upstream and downstream costs. Upstream cost is incurred when company prepares to start its production process. These upstream costs can range from raw materials to research and development to product design. Upstream costs can have a significant impact on the efficiency and profitability of the production process. If raw materials are too expensive or if the design of a new product takes too long, the upstream costs can limit a company's potential profits before a single unit becomes available for sale. While downstream cost is incurred after a company has completed its production process, it must still get that product to its customers. The process involved in delivering those products to the customers is the source of the company's downstream costs. These downstream costs can range from distribution expenses to marketing plans to sales channels. Downstream costs also act as a determining factor in the company's profitability. If distribution costs are too high or sales efforts are ineffective, the downstream costs will eat away at expected revenues. The product life cycle is most frequently understood to mean the life cycle of a particular product on the market...

Words: 1979 - Pages: 8

Free Essay

Life Cycle Paper

...Life Cycle Paper Danielle L Alberty University Of Phoenix The human life cycle is a series of different stages a human being goes thought from infancy to adulthood, this a cycle when the individual grows. There are 9 to 12 stages of the life cycle if you include pre-birth and child birth, the first stages of the human cycle is when you are an infant ranging from the ages birth to one year old, after passing the infant stage you will then go through the early child stage ages 1 to 3 years old, middle childhood is from the ages 3 to 6 years old, being in the late childhood is when you are in the range of 6 years old to 12 years old. When you become a teenager you have become an adolescent until the age of 17, ages 18 to 30 is when you are becoming a young adult then first, second and then later adult before dying. If the individual is cared for the correct way they will learn how to carry them self with pride rather than shame and very sure of themselves. This is about the time individuals will start to wonder and explore the word why and start to experiment of what to believe to be an adult. Playing with Barbie’s and ken’s, also toys such has cars plays a role with wanting to know things and why. If you don’t have involvement with your child in this stage they can resolve problems such as struggles through social role identification. With this it can bring an individual frustrated over goals in life and also may feel guilt. Industry vs. inferiority stage is during......

Words: 848 - Pages: 4

Premium Essay

Marketing - Product Life Cycle

...Critically evaluate the product life-cycle concept. Examine potential problems with the concept. Is it a useful marketing-planning tool? And why? The life of a product has many points of similarity with the human life cycle; the product is born, grows, attains dynamic maturity, and then enters its declining years. According to Arch Patton that is what the product life-cycle concept is. The product life-cycle is a business concept that is important in marketing and it is used as a tool to analyze the demand at the industry level. The theory of the product life-cycle was introduced in the 1950s to explain the expected life cycle of a typical product from design to obsolescence. The product can go through four possible stages. Not all products make it to the final stage, some may continue to grow and some may fail. That may be so because it depends on many factors such as the products themselves, technological changes, market acceptance, economic factors and others. The first stage or the introduction as it is called, this is when research has been done, and product has been developed and launched in the market. The product may fail or be successful, it depend on the consumers and their preference. A benefit of this stage, it may be a unique product and may have minimal competition. The company will have to invest a lot of money and being a new product, the company’s profits......

Words: 783 - Pages: 4

Premium Essay

Cycle of Life

...Life Cycle A product life cycle is a cycle that all products go through from introduction through demise and possible rebirth. There are five stages to the product life cycle: embryo, growth, maturity, decline, and although rare, rebirth. Each of the five stages is a mixture of product, pricing, distribution and promotion. The embryo stage aka introduction stage of the product life cycle is where a new product is launched into market. During this stage there is heavy marketing, product promotion, limited supply and sales are slow and difficult. Manufactures spend a lot to “educate” the public. In this stage the goal is to let people know of the new product and not primarily to make money. Electric cars and hybrids are definitely innovative and appealing. Consumers could not have known that gas was not the only way to fuel your car. Pass or play. Introduction was a success. In the growth stage, the market has accepted the product. Marketing efforts have boosted sales beyond original target market, therefore brand loyalty starts to build and sales increase, as do costs, including staffing. The good news is that profits increase because greater quantities are produced, lowering the cost per unit. The downside is current manufacturing facilities and equipment may not be able to keep up with demand. The Amazon kindle is currently in the growth stage. The idea of having hand-held technology larger than a smart phone but smaller than a full-sized tablet is new. ...

Words: 696 - Pages: 3

Premium Essay

Systems Development Life Cycle

...m P.M HCS 533 Michael Gaul 22 March, 2016 The System Development Life cycle (SDLC) is a model which is used in a project management that involves and describes the stages which are used in information system development project. This life cycle is very useful for the implementation of system development project. The system is a set of components that interact to achieve common goals. It is widely used method of software development and acquisition in information technology area. Various enterprises used this system to achieve a common goal by working together in a proper and systematic way which is useful for achieving the resources and goal. There are various phases which are involved in the process of systematic development life cycle i.e. Planning, Analyzing, designing, supportive and implementation (Joanne Curry, 2007). Planning help us to review the project request, allocate resources and identify project development team. Analyzing is done to conduct preliminary investigations, Designing is done to acquire hardware and software and develop details of systems. Supporting is done to identify errors and monitor system performance and Implementation is a final stage which develops programs and install and convert it into new system. This phase says about its usage in various different enterprises and institutions (Angela Bonin, 2012). The use of System Development Life Cycle in health care institution involves various principal component of a regional hospital......

Words: 1171 - Pages: 5

Premium Essay

Life Cycle

...Chapter 2 Exercise 3 The software development life cycle (SDLC) is the entire process of formal, logical steps taken to develop a software product. Within the broader context of Application Lifecycle Management (ALM), the SDLC is basically the part of process in which coding/programming is applied to the problem being solved by the existing or planned application. The SDLC is broken down into six stages; project planning, requirements definition, design, development, integration/test, and application/acceptance (megamikejr.com). The first stage is the planning stage in which you create a software product that is extracting the requirements or requirements analysis. The stages generally align with the phases of project management lifecycle; however SDLC phases do no correspond one-to-one with project management phases. Project management deliverables such as the Project Scope Statement, Project Schedule, and budget estimates are refined to reflect increasing clarity of scope and requirements with each iteration. Agile methods have proven their effectiveness and are transforming the software industry. As agile methods evolve and extend, Agile Alliance fosters a community where organizations and individuals find ways to transit Agile Alliance website offers an information hub where members can access a wide variety of resources; an article library, videos, presentations, local user group listings and links to additional agile resources. Agile Alliance organizes the......

Words: 991 - Pages: 4

Premium Essay

Product Life Cycle Management

...Engineering Aristotle University of Thessaloniki PRODUCT LIFE CYCLE MANAGEMENT IOANNIS KOMNINOS Electronic Engineer, B.Eng M.Sc.(Eng) Thessaloniki 2002 Product Life Cycle Management 2 CONTENTS INTRODUCTION PART 1: PRODUCT LIFE CYCLE MODEL DESCRIPTION 1. PRODUCT DEVELOPMENT PHASE 2. INTRODUCTION PHASE 3. GROWTH PHASE 4. MATURITY PHASE 5. DECLINE PHASE PART 2: ANALYSIS OF PRODUCT LIFE CYCLE MODEL PART 3: PRODUCT LIFE CYCLE TECHNIQUE EXAMPLE: PRODUCT CANNIBALIZATION 1. UNFAVORABLE CANNIBALIZATION 2. OFFENSIVE CANNIBALIZATION STRATEGIES 3. DEFENSIVE CANNIBALIZATION STRATEGIES PART 4: PRODUCT LIFE CYCLE IN RESPECT TO TECHNOLOGY LIFE CYCLE PART 5: USE OF PRODUCT MANAGEMENT FOR SUCCESSFUL PRODUCT LIFE CYCLE ANNEX 1 ANNEX 2 REFERENCES 3 4 4 5 6 7 8 9 12 12 13 14 16 18 20 23 25 URENIO - Urban and Regional Innovation Research Unit http://www.urenio.org Product Life Cycle Management 3 INTRODUCTION All products and services have certain life cycles. The life cycle refers to the period from the product’s first launch into the market until its final withdrawal and it is split up in phases. During this period significant changes are made in the way that the product is behaving into the market i.e. its reflection in respect of sales to the company that introduced it into the market. Since an increase in profits is the major goal of a company that introduces a product into a market, the product’s life cycle management is very important. Some......

Words: 6228 - Pages: 25