Free Essay

Connectors

In: Computers and Technology

Submitted By ssgandhi
Words 355
Pages 2
ELECTRICAL CONNECTORS

Male 50 ohm BNC connector | Female BNC connector | Cables with BNC connectors | Adapter between a female BNC connector and banana plugs | | Pulse generators with BNC connectors and cables. |
[edit] Keying

XLR connector, showing the notch for alignment.

4-pin Mini-DIN S-Video cable: the notches are the keying showing the keying.

A male plug made by

Audio and video connector

RCA connectors are commonly used for home stereo and video equipment.
Audio connectors and video connectors are electrical connectors for carrying an audio signal orvideo signal, either in an analog or digital format. Analog A/V connectors often use Shielded cable to inhibit RF interference and noise. * | analogue audio, left channel; also mono (RCA/TS), stereo (TRS only), or undefined/other | black RCA/TS/TRS | | grey RCA/TS/TRS | | red RCA/TS | analogue audio, right channel | orange RCA | SPDIF digital audio |
For computers: green TRS 3.5mm | stereo output, front channels | black TRS 3.5mm | stereo output, rear channels | grey TRS 3.5mm | stereo output, side channels | gold TRS 3.5mm | dual output, center and subwoofer | blue TRS 3.5mm | stereo input, line level | pink TS 3.5mm | mono microphone input | [edit] Colour codes yellow RCA/BNC | composite video | red RCA/BNC | red or Pr/Cr chrominance | green RCA/BNC | green or luminance | blue RCA/BNC | blue or Pb/Cb chrominance | white BNC | horizontal sync | black BNC | vertical sync |
Newer connectors are identified by their shape and not their colour. * |

|
Retrieved from "http://en.wikipedia.org/wiki/BNC_connector"

4-conductor hermaphrodite connector for token-ring attachment.

Detail of mating surfaces of hermaphrodite connector.

Transistor switch module with large screw connectors and small fast-on connectors.

[edit] Blade connector

Some blade connectors

8P8C Connector crimped to cable [edit] D-subminiature connectors

A male DE-9 plug.

A male USB series A plug
For more details on this topic, see Pinout.
See also: Crossover cable

Ethernet crossover cable,
Jump to: navigation, search

Part of a 1983 Sinclair ZX Spectrumcomputer board; a populated PCB, showing the conductive traces, vias (the through-hole paths to the other surface), and some mounted electrical components

Bottom of Form…...

Similar Documents

Premium Essay

American Connector Company

...MANAGEMENT AMERICAN CONNECTOR COMPANY INTRODUCTION About DJC DJC is easily perceived as the typical Japanese manufacturer when considering their core principles. DJC’s corporate objective was profit maximization. DJC emphasised on high quality products at low production costs and thus creating value for the company. Initially, it followed a strategy of coping American products, which were considered to be the most advanced in the world, but over a period of years realised highly efficient manufacturing is critical for gaining competitive advantage over its competitors and thus developed its RND team to produce quality products at par with American counterparts. Facing huge challenge to maintain its current market share in connector business due to increase in labour cost, raw material cost, rising yen and wide penetration of imported goods, DJC chose to build its new plant in Kawasaki Japan to achieve “the ultimate rationalization of mass production”. The plant was established in 1986 and is designed to produce 800 million connectors per year with the aim of achieving three main goals 1. 100% utilization. 2. 99% yield on raw material. 3. Six sigma policy reducing defects to 1 per million units of output delivering high customer satisfaction. The Kawasaki plant is successfully operated by Kawasaki management by carefully integrating decisions and policies meeting company’s goal and objectives. About American Connector American Connector Company (ACC) and DJC......

Words: 3074 - Pages: 13

Premium Essay

American Connector Company

...Manufacturing Strategy Case 1: Case Analysis of American Connector Company Submitted By: Bikramaditya Sharma (2010H149221) American Connector Co. (ACC), a US supplier of electrical components, has been forced to re-evaluate operations at its plant in Sunnyvale, California, in response to the plans of a Japanese competitor (DJC Corp.) to construct a rival plant in the United States. The essential issue at hand is whether American Connector’s customization manufacturing strategy should be modified or replaced to meet the threat posed by DJC Corp.’s low-cost manufacturing approach. The situation is particularly critical as ACC’s Sunnyvale plant has recently been experiencing rising costs and deteriorating product quality. Consequently, the present analysis will examine the manufacturing strategies of American Connector Co. and DJC Corp. from a SWOT (Strengths, Weaknesses, Opportunities, and Threats) perspective in order to determine the potential impact of JDC’s entry into the US connector market. American Connector Company Mass Customization Manufacturing Strategy • Strengths DJC Corporation Product-Focused Manufacturing Strategy • • • ACC’s Sunnyvale plant produces a large variety (4,500) of connectors. This allows the company to provide just about any kind of connector that a customer could want. Products are customized and stateof-the-art. They also exceed customers’ expectations. Batch processing and automated assembly facilitate production of large......

Words: 1150 - Pages: 5

Free Essay

Connector Installations

...Connector Installations * Strip the cable of its protective outside jacket about 3-6 inches from the end. This can be done with the cabling scissors by applying pressure from the scissors to the cable and rotating the scissors around the cable. After you have punctured the cables jacket, you should be able pull the jacket off easily leaving exposed wires. * Expose the wire a little further. Stripping the cable can cut and damage the wires at the area that we cut the cable so we want to expose about 6 more inches of fresh wires. Most twisted pair cables have a small string inside the cable to assist with this. * If your cable has the small string. Cut the string after you have enough exposed cable. * Untwist the wires completely to the jacket. Place the wires into the appropriate color slot on the jack. Make sure to place the wires as tightly as possible in the slots in regards to the jacket. There should be as little exposed and untwisted wire as possible to keep the signal strength as high as possible. Make sure to place the White/Blue in the White/Blue spot and not the solid Blue spot. The White/Color wire is not the same as the solid color. * Terminate each wire. After all the wires are in the correct spot and double checked to make sure as little amount of exposed wires will be left as possible, use the punch down tool with the 110 blade and terminate each wire individually. The 110 blade will fully cover the wire connector on the jack. Push down until...

Words: 360 - Pages: 2

Free Essay

Intercounty Connector

...Land use is one of the major issues we are facing in our time today, not only is it an issue of using lands to the advantage of building roads and highways, it is also the cause of global warming, the danger to environmental life and the cost of building the Intercounty Connector, known as the ICC. This issue is what may be called a problem by the residents of the counties of Maryland. The project of building the Intercounty Connector “ICC”, includes building a highway throughout a couple of the counties in Maryland to have a faster and more efficient flow of traffic, which could also endanger the environment, and cause global warming. Also it is going to delay traffic while the project is under construction. There are many reasons why this ICC project caught my attention. First, the use of land. Second, the environmental issues that we are facing today. And finally, the budget was used to build the project. But as always there is an opposing view to every project. Some who were supporting the idea of the ICC gave their lands to the county to build this project, which was not a good plan. Although they do not see the problems of giving away their lands right now, but they are coming. The loss of land will affect people in the future. The ICC project got a final approval from the Gov. of Maryland, and it has won its case against any opposing views. Still the ICC should not have been approved. In the case of the ICC project, there were many views concerning the environmental......

Words: 1532 - Pages: 7

Free Essay

Connector Installations

... Connector Installations Twisted-pair cable: Step 1: Measure the cable you want to put ends on and trim it to the proper length using the cable cutter. Step 2: Use the cable stripper to strip about 1.5" of the jacket from the end of the cable. Then, rotate the stripper around the cable twice. This will cut through the jacket. Step 3: Remove the stripper from the cable and pull the trimmed jacket from the cable, exposing the inner conductors. If a jacket slitting cord (usually a white thread) is present, separate it from the conductors and trim it back to the edge of the jacket. Step 4: Untwist all the inner conductor pairs and spread them apart so that you can see each individual conductor. Step 5: Line up the individual conductors so that the color code matches the color-coding standard you are using. Step 6: This step includes two points. First, trim the conductors so that the ends are even with each other, making sure that the jacket of the cable will be inside the connector. Second, the total length of exposed connectors after trimming should be no longer than 0.5" to 0.625". Step 7: Insert the conductors in the connector, ensuring that all conductors line up properly with the pins as they were in the previous step. If they don't line up, pull them out and line up. Do this carefully, as it's the last step before crimping on the connector. Step 8: Carefully insert the connector and cable into the crimping tool,...

Words: 591 - Pages: 3

Free Essay

Ports and Connectors

...07 Ports and Connectors In this chapter, I learned about serial, parallel, SCSI, USB, sound, and FireWire ports and some of their corresponding devices. I also learned that USB has become the dominate port replacing the PS/2 mouse and keyboard, serial and parallel ports on recent systems. Below are some of the topics presented. Serial, Parallel, Game Ports * Serial ports are male with 9 or 25-pins * Parallel ports are female and have 25-pins * Game ports are also female and have 15pins with two rows Older mice used serial connectors and older keyboards used 5-pin DIN connectors. The more modern connectors is the PS/2 pin or the USB or wireless. Network Interface Card * Is responsible for converting parallel communications to serial * It uses the RJ-45 connector Modem * This is the slowest connection to the Internet which uses the phone line * Transfers 56 Kbps * V.92 is a faster technology but still slower that NIC * They convert analog into digital and then converts from digital into analog * Uses RJ-11 connectors Video * VGA- analog interface D-type, 15-pins, 3 rows * DVI- Digital Visual Interface * S-Video round with 4 or 7 pins, used to connect to the TV USB * Universal Serial Bus that is hot swappable * USB1 transmits at 12 Mbps 3 meters in length * USB2 transmits at 480 Mbps 5 meters in length USB come with two sizes of connectors A and B. The A connector is the larger...

Words: 748 - Pages: 3

Free Essay

Ports and Connectors

...Ports and connectors * Serial ports (Transmit data 1 bit at a time and usually male.)They have 9 to 25 pins. * Parallel ports (Transmit data 8bit at a time and usually female.)They have 25 pins. * Game ports (They are female with 15pins (2rows)). NB// * Note that video (male) have 15pins but are arranged in three rows. * Serial and game ports have being replaced by usb ports. * Early mouse and keyboard used a serial connector 5pin connector. Modern however use ps/2 ports or usb or wireless (Great improvement!) * NIC (network interface card!) Converts parallel communication to serial. It connects through a RJ45 connector cable. * Modem (connects to phone line). It’s the slowest means of data transfer. Its speed is from 56kbps onwards thanks to V.92. converts analog signals to digital which a computer can use then back to analog when sending transmission back. Uses RJ-11 connector cable which connects to the modem. * Video ports (they come in 3) 1:vga – analog interface -D-type, 15pins ,3rows 2:dvi - digital visual interface. 3:s-video – round with 4 or 7 pins connects to tv. * Usb (universal serial bus). * Hot swappable,which means that you can plug them while the computer is running and they will be detected and used. No need to restart the computer. Types of usb Usb 1 – data transfer of 12mbps. Length of cable 3meters. Usb2 – data transfer of 480mbps . length of cable 5mbps. * They both have two side of......

Words: 310 - Pages: 2

Free Essay

American Connector Company

...Case 1: American Connector Company     1. ​ erious is the threat of DJC to American Connector Company?    How s​ Regarding the AC Company, we can see that the market place they have been  occupying the last years is changing. As their competitive advantage was the quality  and customizable flexibility, and regarding that their finance people is no more letting  them to buy the latest production equipment, their position in the market is going to  suffer changes. In the long term, they will definitely lose their competitive advantage.  On the other hand, both companies are different, and take different shares of the  market. Since ACC takes the quality and quality share and DJC takes the mass  production and low­cost share. Apparently there is no threat, however there is. This  threat is real at the moment that the market suffers any change. If the demand for  low­cost products increases and wins positions respect quality and performance, the AC  Company will be automatically out. It is important to notice that this may happen even if  DJC does not run a new plant in the USA.  Considering this, the potential existence of a new plant, specifically focused in low­cost  and mass­production performance, in the US market could be destroyer.  If the new plant gets to be built, the customers may consider the option of adjust  themselves to the new plant connectors, despite of the fact that previously they were ......

Words: 2418 - Pages: 10

Premium Essay

Connector 2001 Case

...the ConneCtor 2011 Prepared by LI Danyang Sunny 1155002138 Question 1: Two dimensions were applied in this case since the third dimension did not capture significant variance compared with the sum of first two. (See Figure 1) The variance explained by the horizontal dimension (46.6%) was two times more than the vertical horizontal (20.8%), so the horizontal dimension was more than twice important in explaining customer perceptions than the vertical one. The horizontal axis associated mostly with attributes “Multimedia”, “Stylish” and “Monitor” while the vertical axis associated mostly with “Sturdiness”, “Light Weight” and “Connectivity”. (See Figure 2) From the perception map, Connector 10L performed the best in terms of Connectivity, Data Entry and Third Party Support. Moreover, it also had advantages on its weight. However, Connector 10L was not attractive enough to customers in terms of Multimedia Function, Stylish and Monitor Quality. It is noticed that there was a lack of other brands near Connector 10L’s position (Only Palm VII), which indicated a potential opportunity for new positioning – wireless access feature. (See Figure 2) Question 2: In the positioning map with Preference Vector, it could be found that Connector 10L is the 5th preferred brand chosen by participants, ranked after HP Jornada, Casio Cassuioeia, Compaq IPac and Palm VII. Overall preference for handheld devices increased with Memory, Software and Connectivity, while Connector 10L......

Words: 1082 - Pages: 5

Free Essay

Lga 1156 Connector

...1. LGA 1156 Connector: What processors is it used with? Intel Core i7, i3, i5 Xeon, Pentium, Celeron What is its purpose on the motherboard? Connect a processor to the motherboard. 2. Intel H55 Chipset What processors is it used with? 1st gen. Intel icore series CPUs integrated graphics capability What is its purpose on the motherboard? Intel chipset designed to provide the interface for the PCI express lanes on a motherboard. 3. Gigabyte GA-H55M-UD2H motherboard Unique On/Off Charge delivers the best recharging capability to iPad, iPhone and iPod Touch •3x USB power delivery for greater compatibility and extra power for USB devices •Leading quality standard of Ultra Durable™ 3 classic technology with 2oz copper PCB design •Innovative Smart 6 technology for smarter PC management •Supports Intel Core™ i7/ Core™ i5/ Core™ i3 LGA1156 processors •Dynamic Energy Saver™ 2 technology enables best energy efficiency •2 PCI-E 2.0 x16 graphics interface(x16+x4) with ATI CrossFireX support for ultimate graphics performance •AutoGreen technology Greening your PC via Bluetooth cellphone •Patented DualBIOS™ technology delivering highest level failure protection •Easy BIOS setting for GPU overclocking •Supports 6 devices without the need for drivers to be installed before being fully operational •Enhanced Intel HD Graphics integrated with the processor •Integrated HDMI/ DVI/ DisplayPort interface for smoother HD video playback •High-performance DAC......

Words: 518 - Pages: 3

Free Essay

Ports and Connectors

...Ports and Connectors (Clips 1.07) In the video Clips 1.07 it will go over the port and connectors of you common every day computer on the outside components. It will explain how each connector will look like both on the computer and the device you will be using. Explaining briefly on the function of each connector and there ports from fast use and the slower methods which explain what devices will soon replace them. Serial, Parallel, & Game Ports * Serial- Transmit data 1 bit at a time, between 9-25 pins, Male, * Parallel- transmit 8 bits at a time, 25 pins, Female * Game- 15pins(2 row) / Similar to the Video Port 15pins but has 3 rows All three have for the most port have been replaced by USB ports. Mouse’s & Keyboard * Mouse- Use Serial connectors * Keyboard- Use 5-Pin DIN Connectors Newer Mouse & Keyboard use PS/2 Connectors or USB/ Wireless NIC-Network Interface Card * NIC- connects to local network, distant network or internet * Concerts Parallel communication to serial * Connects to internet through RJ-45 Connector Modem (Dial-up Slowest Possible Method) * Connect with phone line (Internet) * Standard speed for Modem (56kbps Old/ V.92 Faster Newer) * Converting analog signal from phone line to digital so computer can use. * Connector use RJ-11 Connector Video (Two types of video) * VGA- Analog interface, D-type, 15Pins, 3rows(Common) * DVI- Digital Visual interface (Common) *......

Words: 1159 - Pages: 5

Free Essay

Ports and Connectors

...Ports and Connectors There are many ports and connectors to a computer. The ports are; Serial, Parallel, and Game Ports. A serial port transfers 1 bit of data at a time and is a male port that has 9 or 25 pins, where as a parallel port transfers 8 bits at a time and is a female port with 25 pins, and a game port is a female port as well that has 15 pins laid out in 2 rows. Most computers have now replaced these with USB ports. There are two different USB (Universal Serial Bus) ports. USB port 1, transfers 12 Mbps and is 3 meters wide. USB port 2, transfers 480Mbps and is 5 meters wide. USB connectors come in two sizes, A-connector, and a B-connector, which is the smaller connector. A mouse and keyboard both use a PS/2 port but are now using a USB port wireless. USB can have a limit of 127 devices plugged in at the same time. NIC (Network Interface Card) converts parallel communication to serial and uses an RJ-45 connector. A Modem connects to the phone line but is the slowest way to connect to the internet. It has a transfer speed of 56kbps but V.92 is quicker and it converts analog into digital. The Modem uses a RJ-11 connector. Computers come with two input/ output connections, VGA that has an analog interface that is a D-type connector that has 15 pins laid out in 3 rows, a DVI that is a digital visual interface, and a S-video that connects to the T.V. and that is round with 4 or 7 pins. An SCSI has 2 different connectors narrow and wide. The narrow connector......

Words: 356 - Pages: 2

Premium Essay

Logical Connectors

...LOGICAL CONNECTORS Adverb Clauses, Sentence Adverbs, Transitions, Conjunctions and Prepositional Phrases Structural Formulas: Adverbial Clause: ADV + SVO, SVO. / SVO ADV + SVO. ADV + Ving, SVO. / SVO ADV + Ving. Sentence Adverbs: ADV, SVO. / S, ADV, VO / SVO, ADV. Transitions: SVO. TRANS, SVO. / SVO; trans, SVO. SVO. S, TRANS, VO. / SVO. SVO, TRANS. Conjunctions: SVO, conj SVO. Prepositional Phrases: PP + NOUN, SVO. / SVO PP + NOUN. (NOUN= Nouns, noun phrases, pronouns, gerund phrases, noun clauses) TIME: Adv.Cl: Until, Till, Up till, By the time, Before, After, When, Once, The moment, Now that, Immediately, Whenever, While, Whilst, As, Just as, As long as, As soon as, Since, Hardly . . . when . . ., Scarcely . . . when . . . , No sooner . . . than . . . Transition: Beforehand, Afterwards, Later, Later on, Then, Meanwhile, In the meantime, From (now/then) on PP: Before, After, Until, By, On/Upon, Prior to, Previous to, Subsequent to, During, For Other: Preceding, Proceeding, Following, Succeeding / Formerly, The former/The latter CONDITION Adv.Cl.: If, Only if, Providing/Provided (that), On (the) condition that, In the event that, Suppose/Supposing (that), As long as, So long as, What if, Even if, Unless, Whether … or (not), Assuming that, In (the) case (that), Given (that) Transition: Otherwise, If not Conj.: Or (else) PP: In case of, In the event of, If it weren’t/hadn’t been for, But for, Without CAUSE (REASON) Adv.Cl.: Because,...

Words: 805 - Pages: 4

Free Essay

American Connectors

...Disciplina: Gestão de Operações de Manufatura e Serviços Professor: Irineu G. N. Gianesi Turma: MBE-44 Grupo 10: Renato Floh, Rodolfo Trevisan, CASO: American Connectors (A) • Quão grande é a diferença de custos entre a DJC e a planta de Sunnyvale da American Connectors? Justifique com evidências sua avaliação. A diferença de custos considerando que a planta da DJC esta baseada no Japão é de 22,8% menor com relação ao custo da ACC. [pic] Para fazer um analise anulando a diferença entre os mercados é utilizada a tabela de índice de custo US / Japão: [pic] Se a planta da DJC começa a produzir nos EUA a diferença seria de -40,1% menor com relação ao custo da ACC, isto utilizando os índices de custo dos EUA com relação ao Japão. [pic] • Quais são as fontes dessas diferenças? Em que percentual cada possível fonte explica a diferença total? Quais as evidências de sua avaliação? O melhor cenário para analisar as diferenças seria no cenário em que a DJC começa a produzir nos EUA para excluir da analise o impacto da diferença dos custos dos fatores de produção no Japão com relação aos EUA. Só o fato de começar a produzir nos EUA geraria para a DJC uma redução nos custos de 22% (20,2 vs 26,1). Na seguinte tabela foi inclusa duas colunas, a primeira que apresenta a diferença de valor no custo unitário por tipo de custo, e a segunda coluna apresenta quão importante é este tipo de custo para explicar a......

Words: 793 - Pages: 4

Premium Essay

Cable Connectors and Tools Guide

...4331Insert 06/21/04 11:11 AM Page 1 Cable Connector and Tool Identification Guide 4331Insert 06/21/04 11:11 AM Page 2 This Cable Connector and Tool Identification Guide will allow you to view connectors and tools in living color. Many items in the data-communications industry are color-coded; for example, orange is used to designate fiber optic cable. Some of the products shown in the following pages are: • Connectors • Fiber optic test scope • Cables • Cable tester • Mount box • Punch-down block • Wall plates • Fiber patch panel • Jacks • Telephone installation • Face plates • Fiber optic breakout box • Cable strippers • Wiring closet • Connectorizing kits • Tractor-mounted unspooler FIBER OPTIC PATCH CABLE with MT-RJ connectors FIBER OPTIC PATCH CABLE with ST connectors 4331Insert 06/21/04 11:11 AM Page 3 A SIX-FIBER MULTIMODE FIBER OPTIC CABLE Notice Kevlar threads (yellow) at top. ARMORED FIBER OPTIC CABLE A 25-PAIR UTP CABLE This cable is often used for telephone applications. TYPE 1 TOKEN RING CABLE Notice the shielding and unique connector. TWIN-AXIAL CABLE 4331Insert 06/21/04 11:11 AM Page 4 SILVER SATIN CABLE with an RJ-45 connector MODULAR JACK THAT UTILIZES EITHER 568A OR 568B PINOUT CONFIGURATIONS 3M HOTMELT™ ST FIBER OPTIC CONNECTOR TWIN-AXIAL CABLE TO RJ-11 BALUN 4331Insert 06/21/04 11:11 AM Page 5 ...

Words: 776 - Pages: 4