Free Essay


In: Science

Submitted By shelbychew
Words 724
Pages 3

Biopol is the trade name of one of the most common synthetic biopolymers produced today. This biopolymer is a polyhydroxyalkanoate (PHA) and it is a co-polymer (2 different monomers joined), consisting of the monomers polyhydroxybutyrate (PHB) and polyhydroxyvalerate (PHV).

Biopol is produced industrially, using the fermentation of sugars by the bacterium “Alcaligenes eutrophus” which grow in tanks with a carbon-based food source. The polymer is then separated and purified. •

More recently, it has been attempted to produce the biopolymer more economically by using genetic engineering techniques. Genetically engineering bacteria such as E. Coli so that it produces PHA is beneficial. Faster growth, better yields, easier recovery (accumulation of the biopolymer in the bacteria causes them to become fragile) and less waste biomass are all advantages of using genetically-engineered E. Coli. By also genetically engineering plants such as cress and potatoes, biodegradable plastics can also be produced cheaply. The plants create the biopolymer instead of storing starch.

The polymers made from plants have the same structure as those produced by bacteria. The significance of these methods of production is that Biopol is produced naturally by renewable agricultural resources.

Biopol is stable in air and is quite stable when stored in humid conditions. Biopol is also fully biodegradable with degradation to carbon dioxide and water only occurring when Biopol is exposed to micro-organisms found naturally in soil, sewage, river bottoms, and other comparable environments. The rate of degradation depends on the thickness of the material and how much bacteria is present. Biopol can decompose more speedily without oxygen, which is noteworthy because oxygen is not always present in large amounts in modern-day landfills.

Biopol is also insoluble in water, permeable to oxygen, UV light resistant, acid and base resistant, soluble in chlorinated hydrocarbons, and biocompatible (little chance of being rejected by the body).
Biopol also has a high melting point, high tensile strength, is denser than water and is non-toxic.


There are many potential uses for the biodegradable polymer Biopol. More uses are continually being found because of Biopol’s biocompatibility and biodegradability.

Applications for Biopol include:

A replacement for petroleum-derived plastics because Biopol has high tensile strength, it is insoluble in water, non-toxic and biodegradable.

Disposable products used in the food industry such as utensils, cups and plates because Biopol is strong, insoluble in water, non-toxic and biodegradable.

Plastic wrap for packaging, coatings for paper and cardboard, moisture barrier films for hygienic products, disposable containers for shampoo and cosmetics, and disposable items such as razors, rubbish bags and disposable nappies because Biopol has high tensile strength, it is insoluble in water, non-toxic and biodegradable.

Agricultural uses include a carrier for slow release of pesticides, herbicides or fertilisers because
Biopol is biodegradable and non-toxic.

Medical and pharmaceutical uses such as gauzes, sutures, filaments, implants, drug carriers, and coatings for drugs because Biopol is biocompatible, biodegradable and non-toxic.

Biopol has also been used to make a bicycle helmet. The helmet was made with Biopol fibres and cellulose high performance fibres. It degraded after being buried 40 days in the soil.

Even though Biopol is at present more expensive to produce than conventional plastics, it is biodegradable, therefore allowing more effective waste management. Biopol is also made from renewable crops rather than fossil fuels. Using transgenic plants to produce Biopol is expected to lower costs so that this polymer becomes price-competitive with petroleum-based polymers.

The fact that Biopol is biodegradable is important because containers and disposable items would decompose more rapidly, therefore reducing the space occupied by landfill. Also using Biopol to produce the above products will reduce dependence on fossil fuels, thus making fossil fuels last longer. Biopol in medicine will also save more lives, due to biocompatibility and fewer allergic reactions. •

Biopol is a viable, albeit more expensive alternative to current fossil fuel products. Using Biopol to make the above products reduces negative effects on the environment, as Biopol eventually degrades to only carbon-dioxide and water, instead of being present for a large amount of time like current plastic products. Future developments for the uses of Biopol will be beneficial, as landfill will be reduced and perhaps new life-saving drugs could be formed with the help of Biopol. w…...

Similar Documents

Free Essay

Production of Materials

...available evidence to gather and present data from secondary sources and analyse progress in the recent development and use of a named biopolymer. This analysis should name the specific enzyme(s) used or organism used to synthesise the material and an evaluation of the use or potential use of the polymer produced related to its properties. a) Name a biopolymer (eg. Biopol) outlining how it’s produced. Biopol: Made in the 1960s In an American company. This biopolymer is a PHA and is produced industrially by growing it in tanks with bacteria such as Alcaligenes eutrophus along with a carbon based food source. It is then isolated from the tank to be purified by various methods such as dissolving the PHB in trichloromethane and then removing all its waste to create Biopol. b) Construct a table, relating its uses/possible uses to its properties. Uses Properties related Act as a carrier for slowly releasing insecticides and herbicides and fertilizers Biodegradable – able to break down in the natural environment Use as containers for plastics as well as shampoo containers and cosmetics insoluble in water and relatively high tensile strength Medical applications Biocompatibility and biodegradable Non toxic c) Evaluate the importance of this biopolymer now and its potential for use in the future based on part b. Biopol is quite an important biopolymer as a future resource because firstly, there have been attempt to make this product more economically by genetic......

Words: 6532 - Pages: 27

Premium Essay


...films. These properties have made them popular in many durable or disposable goods and for packaging materials. These materials have molecular weight ranging from several thousands to 1,50,000. Excessive molecular size seems to be mainly responsible for the resistance of these chemicals to biodegradation and their persistence in soil environment for a long time. Plastic in the environment is regarded to be more an aesthetic nuisance than a hazard, since the material is biologically quite inert. The plastic industry in the US alone is $ 50 billion per year and is obviously a tempting market for biotechnology goral enterprises. Biotechnological processes are being developed as an alternative to existing route or to get new biodegradable biopolymers . 20% of solid municipal wastes in US is plastic. Non-degradable plastics accumulate at the rate of 25 million tones per year. According to an estimate more than 100 million tones of plastic is produced every year all over the world. In India it is only 2 million tones. In India use of plastic is 2 kg per person per year while in European countries it is 60 kg per person per year while that in US it is 80 kg per person per year. * disposal of waste plastic Incineration is a waste treatment technology that involves the combustion of organic materials and/or substances. Incineration and other high temperature waste treatment systems are described as "thermal treatment". Incineration of waste materials converts the waste into......

Words: 645 - Pages: 3

Free Essay


...depressant, biocides, polyelectrolytes, scale inhibitors etc. But still FCLS, Dextrin, polyanionic cellulose etc. are being imported in the country. Kalpana Chemicals Private Limited, Dai-Ichi Karkaria Pvt. Ltd., Hindustan Magcobar Chemicals Ltd., Baker Oil Treating (India) Ltd., Hindustan Gum and Chemicals Ltd. are the major manufacturers of oil field chemicals. INTERNATIONAL SCENARIO The major international manufacturers of oil-field chemicals are Baroid, International Drilling Fluids, M.I. Drilling Fluids, Union Carbide Corporation, Floridine of USA, Hoechst and Ewabo of Germany, Avebene and Rhone Poulenc Chiemic of France, Shell and BP Chemicals of London. PHPA (hydroxy poly acrylamide) based drilling mud, low solid 100% oil mud and biopolymer fluids are the latest developments at the international level. RESEARCH AND DEVELOPMENT During the past ten years, a major break-through in the production of oil-field chemicals has taken place in India. The satisfactory field performance of some of the speciality chemicals developed as per international standards has greatly reduced the dependence on imports. Availability of speciality chemicals, agro products and minerals required for oil industry non provide opportunities for export. This development has became possible both through indignous R&D efforts and/or through technical collaboration with foreign manufacturers. ONGC has got excellent research and development centres like Institute of Drilling Technology (IDT) equipped......

Words: 1844 - Pages: 8

Premium Essay

Apple - Business History

...Though our revenue has grown, our greenhouse gas emissions per dollar of revenue have decreased by 21.5 percent since 2008. And we’re still the only company in our industry whose entire product line not only meets but exceeds the strict energy guidelines of the ENERGY STAR specification. Environmentally conscious materials. In addition to eliminating toxins and designing products with highly recyclable aluminum enclosures, Apple works with environmentally conscious materials including recycled plastics, recycled paper, biopolymers, and vegetable-based inks. We have also found ways to reengineer secondary materials to the high standard of our designs. For example, our fan assemblies in Mac Pro use advanced materials derived from repolymerized plastic bottles. Speaker assemblies and internal brackets in the Apple Thunderbolt Display are made from recycled PC-ABS. In 2012, our latest achievements included the AirPort Express enclosure, which includes biopolymers derived from industrial-grade rapeseed and recycled PC-ABS. And the aluminum stand on the iMac is made using 30 percent recycled content. Our packaging designs for many products use pulp fiber from post-consumer paper streams, and we use vegetable-based inks for in-box materials. And not only are iTunes Gift Cards recyclable, they are made from recycled paper. Achieving 100 percent renewable energy. We’re currently on track toward achieving an ambitious goal: to power every Apple facility entirely with energy......

Words: 1300 - Pages: 6

Free Essay


...Textile Seminars and workshops Textile Growth Our main goal is to provide a resource and creative meeting facility for lovers all things hand-made. Focused in the Textile Arts, we offer courses, workshops, and special events.  11/03/10 D620 3/11/2010 1. Topics Textile Design, Fashion and Clothing Science Textile testing and Quality Control. Advancement in Garment Manufacturing Advancement in Textile Processing Biopolymers and Biotechnology Comfort and Wellbeing Developments in Textile Machinery E-activities and E-commerce Ecology and Environment in Textile Production Fibre Physics and Textile Mechanics Finishing, Dyeing and Treatment Functional Textiles Global Warming and Energy Saving Medical Textiles Modelling and Simulation Nanotextiles Smart and Interactive Textiles Supply Chain Management and Logistics Technical and Protective Textiles Textile Design and Fashion Textile Education Textile Testing 2. General Topics * Fiber and Polymer Materials * Textile Processing, Mechanics and Machinery * Dyeing, Finishing, Coating and Laminating * Textile Testing, Evaluation and Performance * Textile Design, Fashion and Clothing Science 3. Special Topics * Smart Interactive Textiles and Nanotechnology * Sustainable Textiles and Biotechnology * Extreme/Protective Textiles * Nonwoven and Technical Textiles * Advanced Textile Composites and Applications Meetup Name | Textile Seminar......

Words: 703 - Pages: 3

Premium Essay

International Paper

...natural resources. IP is constantly “finding ways to reduce, reuse, and recycle energy at each of its facilities” to reduce their air emissions (“International Paper,” 2012). One such facility in Vicksburg, Mississippi recovers 38,000 pounds of steam per hour and reuses it in other areas within the facility saving an estimated $2.4 million in fuel cost annually which is then transferred into saving for the customers. Another way IP defies social criticism is through creating “innovative products that meet the needs of consumers” (“International Paper,” 2012). One example of this is the newly invented ecotainer. The ecotainer replaces the old plastic lined coffee cups with an environmentally friendly cup lined with resin made from modified biopolymer. With this new lining cups can become compost to be used for landscaping, farming, and gardening. 2. Analyze International Paper according to the Pyramid of Corporate Social Responsibility. According to textbook the Pyramid of Corporate Social Responsibility states that a company is responsible for four things: economic responsibilities, legal responsibilities, ethical responsibilities, and philanthropic responsibilities (Lamb, Hair, & McDaniel, 2014). IP is economically responsible by constantly being profitable. In 2011, IP sold over $25 billion gaining them ranking of 105 on the Fortune 500 list. IP maintains legally responsible by “transparently reporting its activities to the public for any of its activities that......

Words: 820 - Pages: 4

Premium Essay

Case Analysis One: International Paper

...IP invested “$2.8 million in capital improvements which will save an estimated $2.4 million in fuel costs annually” (“International Paper,” 2012). With them doing this it provides them with reusing energy while saving the environment. Therefore IP is successful in sustainability by reusing emissions to help them be more profitable and helping the environment. Does International Paper practice green marketing, cause-related marketing or neither? Support your answer with examples. Yes International Paper does practice green marketing. This is true because IP teamed up with DaniMer Scientific, and NatureWorks LLC to build a completely eco friendly coffee cup called the ecotainer. The ecotainer is, “Coated with a resin made from modified biopolymer. When discarded in commercial and municipal operations, cups with the new lining become compost, which can then be used for gardening, landscaping, and farming” (“International Paper,” 2012). With IP and its partners creating this new cup, it allows people to recycle the cups if need be and to also use the recycled material for the environment. The ecotainer is very eco friendly. While it can be used for compost for the earth, the ecotainer has, “eliminated over a million pounds of petrochemical plastic from the marketplace” (“International Paper,” 2012). With the ecotainer becoming such a popular innovation, IP is now exploring more green market products and technology used in foodservice disposable packaging. Therefore......

Words: 942 - Pages: 4

Premium Essay

Biocompatibility of Coronary Stents

...not good news. Most stents are bare metal stents (no coating), and undergo restenosis and thrombosis. Restenosis is the re-narrowing of the blood vessel due to smooth muscle cell hyperproliferation. Thrombosis is the formation of a blood clot. Drug eluting stents reduce restenosis but are susceptible to early and late thrombosis. Late thrombosis occurs between 30 days and 1 year, with very late thrombosis occurring after more than a year. Currently, all polymer-coated metallic vascular implants have sub-optimal biocompatibility which impairs their clinical performance. Biopolymers are being tested to use for coating these metal stents, in order for less bodily rejection to occur. There are two ways to apply these polymers used to coat stents: they can be sprayed on or by dipping. One problem with these methods involves instability linked with hypersensitivity and chronic inflammation. The biopolymers need to withstand process of crimping and expansion during implantation, along with pulsatile flow process. Objective It is important to improve vascular compatibility by coating stents with a polymer that: 1) is mechanically robust enough to prevent cracking and delamination 2) reduces thrombosis associated with metallic alloys 3) enhances endothelialization and reduces restenosis Plasma activated coating (PAC), bound to human tropoelastin (monomer of elastin) is expected to demonstrate the above characteristics. Previous attempts to improve stent......

Words: 2445 - Pages: 10

Premium Essay

Blah Blah

...framework for understanding the transfer of sequence information between sequential information-carrying biopolymers, in the most common or general case, in living organisms. There are 3 major classes of such biopolymers: DNA and RNA (both nucleic acids), and protein. There are 3×3 = 9 conceivable direct transfers of information that can occur between these. The dogma classes these into 3 groups of 3: 3 general transfers(believed to occur normally in most cells), 3 special transfers (known to occur, but only under specific conditions in case of some viruses or in a laboratory), and 3 unknown transfers (believed never to occur). The general transfers describe the normal flow of biological information: DNA can be copied to DNA (DNA replication), DNA information can be copied into mRNA (transcription), and proteins can be synthesized using the information in mRNA as a template (translation).[2] ------------------------------------------------- Biological sequence information Main article: Primary structure The biopolymers DNA, RNA and proteins, are linear polymers (i.e.: each monomer is connected to at most two other monomers). The sequence of their monomers effectively encodes information. The transfers of information described by the central dogma are faithful, deterministic transfers, wherein one biopolymer's sequence is used as a template for the construction of another biopolymer with a sequence that is entirely dependent on the original biopolymer's......

Words: 1399 - Pages: 6

Premium Essay


...with plastics designed to degrade, biodegrade, or compost can provide even more environmental benefits. Biobased and compostable plastics, also known as bioplastics, hold the potential to reduce dependence on fossil fuels, foster the development of more sustainable products, and increase the diversion of food waste from landfills. Some modern bags are made of vegetable-based bio plastics, which can decay organically and prevent a build-up of toxic plastic bags in landfills and the natural environment. Biodegradable plastics can break down in either anaerobic or aerobic environments, depending on how they are manufactured. There is a variety of materials that bioplastics can be composed of, including: starches, cellulose, or other biopolymers. In general, biodegradable plastic are designed to biodegrade but most take very long time to degrade. Hence, the researchers will look into the possible modes of making biodegradable thermoplastics to reduce the waste and harm pose by petroleum based plastics and fasten the rate of decomposition of existing biodegradable plastics. Background of the Study It is so simple in theory but complicated in application. You have been told so often and for some time that plastics have a negative impact on the environment. This is even more telling in a flood-prone country such as the Philippines, where plastic bags clog their overtaxed sewage systems. The big problem isn’t just that plastic bags take forever to disintegrate, it is the......

Words: 8501 - Pages: 35

Premium Essay


...synthetic via. The latter one is represented by several polymers and subgroups: • The polycaprolactones: PCL; • The polyesteramide: PEA; • The aliphatic copolyester or Polybutylene Succinate Adipate: PBSA • The aromatic copolyester, such as the Polybutylene adipate co-terephthalate: PBAT. PCL and PLA are the polymers most used in the market, except for starch derivatives (Averous, 2002). Figure 18.1 shows the different families of biopolymers, and their raw materials. 522 Book 3 - Technology, use and potentialities of Latin American starchy tubers Source: Adapted from Averous (2002) and Weber (2000). Figure 18.1. Different families of biodegradable polymers and their raw materials. Figure 18.2 indicates the chemical formulas of main biodegradable polymers. Figure 18.2. Chemical structure of several biodegradable polyesters. 523 LATIN AMERICAN STARCHY TUBERS According to Weber (2000), starch-based packagings will continue developing with the support of their niches of traditional non-food markets. Later, starch biopolymers should enter the food market, after that resistance to humidity and cost-related problems are solved 18.3. Starch-based plastics The use of starch in the manufacturing of bioplastics began in the 70’s (Curvelo et al., 2001). Among its advantages, the starch is cheap, abundant and renewable. Besides, it is found in several forms due to the origin of its raw material (Lawter and Fischer, 2000). In the granular......

Words: 8897 - Pages: 36

Premium Essay


...[5] Reduction efforts Household items made of various types of plastic. Efforts to reduce the use of plastics and to promote plastic recycling have occurred. Some supermarkets charge their customers for plastic bags, and in some places more efficient reusable or biodegradable materials are being used in place of plastics. Some communities and businesses have put a ban on some commonly used plastic items, such as bottled water and plastic bags.[30] Biodegradable and degradable plastics The use of biodegradable plastics has been shown to have many advantages and disadvantages. Biodegradables are biopolymers that degrade in industrial composters. Biodegradables do not degrade as efficiently in domestic composters, and during this slower process, methane gas may be emitted.[27] There are also other types of degradable materials that are not considered to be biopolymers, because they are oil-based, similar to other conventional plastics. These plastics are made to be more degradable through the use of different additives, which help them degrade when exposed to UV rays or other physical stressors.[27] However, biodegradation-promoting additives for polymers have been shown not to significantly increase biodegradation.[31] Although biodegradable and degradable plastics have helped reduce plastic pollution, there are some drawbacks. One issue concerning both types of plastics is that they do not break down very efficiently in natural environments. There,......

Words: 1659 - Pages: 7

Free Essay

Review of Battery

...have been started request for a better performance battery which has long life span and safe to be use. Many researchers have been carried out to overcome the problem. Research on biodegradable electrolytes such as solid polymer electrolyte (SPE) have been carried out by many researches since it’s allow the fabrication safer battery such as no leakage, low self-discharge in the batteries rechargeable and simple to be prepare (Lakshi & Chandra, 2002; Pandey et al, 1998). Some of the researchers find out that the SPE are safer to be use when compare to the liquid state polymer electrolyte due to the solid state biopolymer are more environmental friendly and more electrochemical stability (Biswal & Singal, 2004). In 2012, Chai and Isa have stated that the solid biopolymer electrolytes is more safe and no leakage when compare to the liquid state biopolymer. Besides, these kinds of electrolytes are easy to be prepared, no leakage and have a good ionic conductivity between the cathode and anode (Samsudin, 2012). Energy Storage Devices A high efficiency of energy storage devices would have medium to store the energy at off-peak times where will reduce the need for overall generation from power plants during peak time and help to lower the cost as well as green house gas emission (Xu et al.,2015). There is much kind of energy storage devices such as batteries, fuel cell, and capacitor and so on but the rechargeable batteries had surpassed the others at the present......

Words: 5125 - Pages: 21

Premium Essay


...including neutral fats, waxes, phospholipids, and glycolipids. The fatty acids with no carbon-carbon double bonds are called saturated. The ones that have two or more double bonds are called polyunsaturated.  Proteins Proteins are large biomolecules, or macromolecules. They are made up of hundreds or thousands of smaller units called amino acids, which are attached to one another in long chains. There are 20 different types of amino acids that can be combined to make a protein. Eight amino acids are essential for humans, as the body cannot produce them by themselves, and they have to be supplied externally. These are: isoleucine, leucine, lysine, methionine, phenylalanine, threonine, tryptophan and valine. Nucleic Acid Nucleic acids are biopolymers, or large biomolecules, essential for all known forms of life. Nucleic acids, which include DNA and RNA, are made from monomers known as nucleotides. Each nucleotide has three components: a 5-carbon sugar, a phosphate group, and a nitrogenous base. If the sugar is deoxyribose, the polymer is DNA. If the sugar is ribose, the polymer is RNA. When sugar and a nitrogenous base get combined they form a nucleotide. Nucleotides are also known as phosphate nucleotides....

Words: 371 - Pages: 2

Free Essay


...products or to do tasks for human beings. Biotechnology is the practice of using plants, animals and micro-organisms such as bacteria, as well as biological processes - such as the ripening of fruit or the bacteria that break down compost - to some benefit. For example, biotechnology is used in industry, medicine and agriculture to produce foods, medicines, and test for diseases and remove waste. Examples of industry, medicine, agricultural? Industry: Some examples that are used in biotechnology industries is most laundry detergents produced in the United States contain biotechnology-based enzymes. The other example in industry biotechnology has also led to the creation of a wide range of materials, such as biodegradable plastics, biopolymers and bio-pesticides, novel fibres and even timbers. Some are used as fabric softeners, corrosion inhibitors, ink carriers, solvents, hair conditioners and perfumes. Medicine: one example of medicine in biotechnology is making vaccines and drugs to determining genetic origins of disease, producing organs for xenotransplant and developing nonmedical diagnostic methods. The other example in the use of medicine in biotechnology has made new therapies and vaccines, including products to treat cancer, diabetes, HIV/ AIDS and autoimmune disorders. Agriculture: Agricultural biotechnology benefits farmers, consumers and the environment. By increasing yields and farm income, decreasing pesticide applications and improving soil and water......

Words: 721 - Pages: 3