Free Essay

Ausdrinks

In: Business and Management

Submitted By asifabuzar
Words 24211
Pages 97
This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.

Click a topic
Basic troubleshooting Quick reference

User Manual
ST6500

Contents Basic functions Extended functions Shooting options Playback/Editing Settings Appendixes Index

Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Warning—situations that could cause injury to yourself or others Do not disassemble or attempt to repair your camera. This may result in electric shock or damage to the camera. Do not use your camera near flammable or explosive gases and liquids. This may cause a fire or explosion. Do not insert flammable materials into the camera or store these materials near the camera. This may cause a fire or electric shock. Do not handle your camera with wet hands. This may result in electric shock. Prevent damage to subjects’ eyesight. Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals. If you use the flash too close to your subject’s eyes, this can cause temporary or permanent eyesight damage. Keep your camera away from small children and pets. Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well. Do not expose the camera to direct sunlight or high temperatures for an extended period of time. Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your camera’s internal components. Avoid covering the camera or charger with blankets or clothes. The camera may overheat, which may distort the camera or cause a fire. If liquid or foreign objects enter your camera, immediately disconnect all power sources, such as the battery or charger, and then contact a Samsung service center.

1

Health and safety information
Caution—situations that could cause damage to your camera or other equipment Do not touch the flash while it fires. The flash is very hot when fired and may burn your skin. When you use AC charger, turn off the camera before you disconnect the power to the AC charger. Failing to do so may result in fire or electric shock. Disconnect the charger from the wall socket when not in use. Failing to do so may result in fire or electric shock. Do not use a damaged power supply cord, plug, or loose outlet when you charge batteries. This may cause a fire or electric shock. Do not allow the AC charger to come in contact with the +/terminals on the battery. This may cause a fire or electric shock. Do not force the camera’s parts or apply pressure to the camera. This may cause your camera to malfunction.

Remove the batteries from your camera when storing it for an extended period of time. Installed batteries may leak or corrode over time and cause serious damage to your camera. Use only authentic, manufacturer-recommended, Lithium-ion replacement batteries. Do not damage or heat the battery. Inauthentic, damaged, or heated batteries may cause a fire or personal injury. Use only Samsung-approved batteries, chargers, cables and accessories. • Using unauthorized batteries, chargers, cables or accessories can cause the batteries to explode, damage your camera, or cause injury. • Samsung is not responsible for damage or injuries caused by unapproved batteries, chargers, cables or accessories. Use the battery only for its intended purpose. Misusing the battery may cause a fire or electric shock.

2

Health and safety information
Exercise caution when you connect cables or adapters and install batteries and memory cards. If you force the connectors, improperly connect cables, or improperly install batteries and memory cards, you can damage ports, connectors, and accessories. Keep cards with magnetic strips away from the camera case. Information stored on the card may be damaged or erased. Never use a damaged charger, battery, or memory card. This may result in electric shock or camera malfunction or cause a fire. Check that the camera is operating properly before use. The manufacturer takes no responsibility for any loss of files or damage that may result from camera malfunction or improper use. You must plug the end of the USB cable with the indicator light into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.

3

Outline of the User Manual
Copyright information • Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. • Mac is a registered trademark of the Apple Corporation. • HDMI, the HDMI logo and the term “High Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC. • microSD™ and microSDHC™ are registered trademarks of the SD Association. • Trademarks and trade names used in this manual are the property of their respective owners.

Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.

12

Extended functions
Learn how to capture a photo, record a video, and record a voice memo by selecting a mode.

32

Shooting options
Learn how to set the options in Shooting mode.

50

Playback/Editing
• Camera specifications or contents of this manual may

79

be changed without prior notice due to upgrade of camera functions. • You are not allowed to reuse or distribute any part of this manual without prior permission. • For Open Source License information, refer to the ‘OpenSourceInfo.pdf’ in the provided CD-ROM.

Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, TV, or HDTV.

Settings
Refer to options to configure your camera’s settings.

107

Appendixes
Get information about error messages, specifications, and maintenance.

114

4

Icons used in this manual
Icon Function

Additional information Safety warnings and precautions [ ] ( ) Camera buttons. For example, [Shutter] represents the shutter button. Page number of related information The order of options or menus you must select to perform a step; for example: Touch m Photo Size (represents Touch m, and then touch Photo Size). * Annotation

Abbreviations used in this manual
Abbreviation ACB AEB AF DIS DPOF EV ISO OIS WB Definition

Auto Contrast Balance Auto Exposure Bracket Auto Focus Digital Image Stabilization Digital Print Order Format Exposure Value International Organization for Standardization Optical Image Stabilization White Balance

5

Expressions used in this manual
Pressing the shutter • Half-press [Shutter]: press the shutter halfway down • Press [Shutter]: press the shutter all the way down Exposure (Brightness) The amount of light that enters your camera determines the exposure. You can alter the exposure with shutter speed, aperture value, and ISO sensitivity. By altering the exposure, your photos will be darker or lighter.

Half-press [Shutter]

Press [Shutter]

Normal exposure

Overexposure (too bright)

Subject, background, and composition • Subject: the main object in a scene, such as a person, animal, or still life • Background: the objects around the subject • Composition: the combination of a subject and background

Background Backgr un Backg ound n Composition Subject

6

Basic troubleshooting
Learn to solve common problems by setting shooting options. The subject’s eyes appear red. Red eye occurs when the subject's eyes reflect light from the camera flash. Red-eye or Red-eye Fix. (p. 55) • If the photo has already been captured, select Red-eye Fix in the edit menu. (p. 96)
• Set the flash option to

Photos have dust spots.

If dust particles are present in the air, you may capture them in photos when you use the flash.
• Turn off the flash or avoid capturing photos in a dusty place. • Set ISO sensitivity options. (p. 57)

Photos are blurred.

Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly.
• Use the OIS function or half-press [Shutter] to ensure the subject is focused. (p. 29) • Use the DUAL IS mode. (p. 35)

Photos are blurred when shooting at night.

As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold the camera steady long enough to take a clear picture and may result in camera shake. • Select Night Shot mode. (p. 37) • Turn on the flash. (p. 55) • Set ISO sensitivity options. (p. 57) • Use a tripod to prevent your camera from shaking. When the light source is behind the subject or when there is a high contrast between the light and dark areas, the subject may appear too dark. • Avoid shooting toward the sun. • Select Backlight in Scene mode. (p. 36) • Set the flash option to Fill in. (p. 55) • Adjust the exposure. (p. 67) • Set the Auto Contrast Balance (ACB) option. (p. 68) • Set the metering option to Spot if a bright subject is in the center of the frame. (p. 68)

Subjects come out too dark because of backlighting.

7

Quick reference
Capturing photos of people
• Beauty Shot mode 37 • Red-eye/Red-eye Fix (to prevent or correct red-eye) • Face Detection 62

Capturing photos of text, insects, or flowers
• Scene mode > Text 36 • Close Up mode 36 • Macro 58

55

Applying effects to photos Capturing photos at night or in the dark
• • • • Scene mode > Sunset, Dawn 36 Night Shot mode 37 Flash options 55 ISO sensitivity (to adjust the sensitivity to light) • • • • • • Object Highlight mode 42 Magic Frame shot mode 43 Photo Filter mode 43 Vignetting mode 46 Smart Filter effects 72 Image Adjust (to adjust Sharpness, Contrast, or Saturation)

57

Capturing action photos
• Continuous, Motion Capture 71

75

Applying effects to videos
• Movie Filter mode 45 • Vignetting mode 46 • Palette Effect mode 47

Adjusting the exposure (brightness)
• ISO sensitivity (to adjust the sensitivity to light) 57 • EV (to adjust exposure) 67 • ACB (to compensate for subjects against bright backgrounds) 68 • Metering 68 • AEB (to take 3 photos of the same scene with different exposures) 71

• Viewing files by category in Smart album 83 • Viewing files in 3D view 84 • Viewing files as thumbnails 85 • Deleting files on the memory card 86 • Viewing files as a slide show 88 • Viewing files on a TV or HDTV 97 • Connecting your camera to a computer 99 • Adjusting sound and volume 109 • Adjusting the brightness of the display 110 • Changing the display language 111 • Setting the date and time 111 • Before contacting a service center 124

Reducing camera shake
• Optical Image Stabilization (OIS) • DUAL IS mode 35 29

8

Contents
Basic functions ................................................................. 12
Unpacking ................................................................... Camera layout ............................................................. Inserting the battery and memory card ....................... Charging the battery and turning on your camera ...... Charging the battery ................................................... Turning on your camera .............................................. Performing the initial setup ......................................... Learning icons ............................................................. Using the touch screen ............................................... Setting the touch screen and sound ........................... Setting the display type for the touch screen ................. Setting the sound ....................................................... Using the Home screen ............................................... Accessing the Home screen ....................................... Icons on the Home screen .......................................... Rearranging icons ...................................................... Capturing photos ......................................................... Zooming .................................................................... Reducing camera shake (OIS) .................................... Tips for getting a clearer photo ................................... 13 14 16 17 17 17 18 20 21 23 23 23 24 24 24 25 26 27 29 30

Extended functions .......................................................... 32
Using shooting modes ................................................ Using the Smart Auto mode ........................................ Using the Simple Shot mode ....................................... Using the DUAL IS mode ............................................ Using the Scene mode ............................................... Using the Close Up mode ........................................... Using the Night Shot mode ......................................... Using the Beauty Shot mode ....................................... Using the Program mode ............................................ Using the Movie mode ................................................ Using the Smart Movie mode ...................................... Using effect modes ..................................................... Using the Object Highlight mode ................................. Using the Magic Frame Shot mode .............................. Using the Photo Filter mode ........................................ Using the Movie Filter mode ........................................ Using the Vignetting mode .......................................... Using the Palette Effect mode ..................................... Recording voice memos ............................................. Recording a voice memo ............................................ Adding a voice memo to a photo ................................. 33 33 34 35 36 36 37 37 38 39 40 42 42 43 43 45 46 47 48 48 49

9

Contents Shooting options .............................................................. 50
Selecting a resolution and quality ............................... Selecting a resolution .................................................. Selecting image quality ............................................... Using the timer ............................................................ Shooting in the dark .................................................... Preventing red-eye ..................................................... Using the flash ........................................................... Adjusting the ISO sensitivity ......................................... Changing the camera’s focus ..................................... Using macro .............................................................. Using smart touch focus ............................................. Using one touch shooting ........................................... Adjusting the focus area .............................................. 51 51 52 54 55 55 55 57 58 58 59 60 60 Using face detection ................................................... Detecting faces .......................................................... Capturing a self portrait shot ........................................ Capturing a smile shot ................................................ Detecting eye blinking ................................................. Using Smart Face Recognition .................................... Registering faces as your favorites (My Star) ................. Adjusting brightness and color ................................... Adjusting the exposure manually (EV) ........................... Compensating for backlighting (ACB) ........................... Changing the metering option ...................................... Selecting a light source (White balance) ........................ Using burst modes ...................................................... Applying effects/Adjusting images .............................. Applying Smart Filter effects ........................................ Adjusting your photos ................................................. Reducing the sound of the zoom ................................ Available shooting options by shooting mode ............ 62 62 63 63 64 64 65 67 67 68 68 69 71 72 72 75 76 77

10

Contents Playback/Editing............................................................... 79
Viewing photos or videos in Playback mode .............. 80 Starting Playback mode .............................................. 80 Viewing photos .......................................................... 87 Playing a video ........................................................... 89 Playing a voice memo ................................................. 91 Editing a photo ............................................................ 92 Resizing photos ......................................................... 92 Rotating a photo ......................................................... 93 Using Smart Crop ...................................................... 93 Applying Smart Filter effects ........................................ 94 Adjusting your photos ................................................. 94 Creating a print order (DPOF) ....................................... 96 Viewing files on a TV or HDTV ..................................... 97 Transferring files to your Windows computer ............. 99 Transferring files with Intelli-studio ............................... 100 Transferring files by connecting the camera as a removable disk .................................................. 102 Disconnecting the camera (for Windows XP) ............... 103 Transferring files to your Mac computer ................... 104 Printing photos with a PictBridge photo printer ....... 105

Settings ........................................................................... 107
Settings menu ........................................................... Accessing the settings menu .................................... Sound ..................................................................... Display .................................................................... Connectivity ............................................................. General ................................................................... 108 108 109 109 110 111

Appendixes ..................................................................... 114
Error messages ......................................................... Camera maintenance ................................................ Cleaning your camera ............................................... Using or storing the camera ...................................... About memory cards ................................................ About the battery ...................................................... Before contacting a service center ........................... Camera specifications ............................................... Glossary ..................................................................... FCC notice ................................................................. Index .......................................................................... 115 116 116 117 118 120 124 127 131 136 137

11

Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.

Unpacking

………………………………… 13

Setting the touch screen and sound

Camera layout ……………………………… 14 Inserting the battery and memory card … 16 Charging the battery and turning on your camera ……………………………………… 17
Charging the battery ……………………… 17 Turning on your camera ………………… 17

…… 23 Setting the display type for the touch screen …………………………………… 23 Setting the sound ………………………… 23 Accessing the Home screen ……………… 24 Icons on the Home screen ……………… 24 Rearranging icons ………………………… 25

Using the Home screen …………………… 24

Performing the initial setup

……………… 18

Learning icons ……………………………… 20 Using the touch screen …………………… 21

Capturing photos

………………………… 26 Zooming ………………………………… 27 Reducing camera shake (OIS) …………… 29

Tips for getting a clearer photo …………… 30

Unpacking
The following items are included in your product box. Optional accessories

Camera

AC adapter/USB cable Camera case HDMI cable A/V cable

Rechargeable battery

Strap

Battery charger Touch pen User Manual CD-ROM

Memory card/ Memory card adapter

The illustrations may differ slightly from the items shipped with your product.

Quick Start Manual
Basic functions 13

Camera layout
Before you start, familiarize yourself with your camera’s parts and their functions. POWER button Shutter button Microphone

Flash AF-assist light/Timer lamp

Lens

HDMI port Accepts HDMI cable USB and A/V port Accepts USB cable and A/V cable Tripod mount Battery chamber cover Insert a memory card and battery
Basic functions 14

Camera layout

Speaker

Status lamp • Blinking: When the camera is saving a photo or video, being read by a computer or printer, or out of focus • Steady: When the camera is connecting to a computer or in focus Zoom button • In Shooting mode: Zoom in or out • In Playback mode: Zoom in on part of a photo or view files as thumbnails

Touch screen

Attaching the strap x

Playback button

y

Home button

Basic functions 15

Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the camera.

Removing the battery and memory card

Push the card gently until it disengages from the camera, and then pull it out of the slot.
Memory card

Insert a memory card with the gold-colored contacts facing up.
Battery lock

Memory card

Slide the lock left to release the battery.

Insert the battery with the Samsung logo facing down.
Rechargeable battery

Rechargeable battery
You can use the internal memory for temporary storage if a memory card is not inserted.

Basic functions 16

Charging the battery and turning on your camera
Charging the battery
Before you use the camera for the first time, you must charge the battery. Attach the USB cable to the AC adapter, and then plug the end of cable with the indicator light into your camera.

Turning on your camera
Press [POWER] to turn your camera on or off. • The initial setup screen appears when you turn on the camera for the first time. (p. 18)

Turning on your camera in Playback mode
Press [Playback]. The camera turns on and immediately accesses Playback mode.

Indicator light • Red: Charging • Green: Fully charged

If you turn on your camera by pressing and holding [Playback] for about 5 seconds, the camera does not emit any sounds.

Basic functions 17

Performing the initial setup
When the initial setup screen appears, follow the steps below to configure the camera’s basic settings.

1

Touch Language.

4

Touch Home, and then touch z or x to select a time zone.
• When you travel to another country, touch Visit, and then

select a new time zone.
Time Zone

2

Select a language, and then touch o.

London, Lisbon

5 6

Touch o to save. Touch Date/Time Set.

3

Touch Time Zone.

Basic functions 18

Performing the initial setup

7

Touch the up or down arrows to set the date.
Date/Time Set Year Month Day

10 11

Touch Touch Calibration. Touch the target on the screen with your touch pen.
Touch Calibration

8

Touch

, and then set the time.
Date/Time Set Hr Min

Touch directly in the center of the target for optimal performance.

12

Touch o to save settings.

• To set daylight-saving time, touch

.

9

Touch o to save.

Basic functions 19

Learning icons
The icons the camera displays on the screen change according to the mode you select or the options you set.
Icon Description Icon Description

Current time Aperture value Shutter speed Voice memo

Memory card inserted
• • •

: Fully charged : Partially charged : Empty (Recharge)

Photo resolution Video resolution Metering Optical Image Stabilization (OIS) Exposure value adjusted ISO sensitivity White balance Burst type Flash

1

2

3

Timer Auto focus frame

1 Option icons (touch)
Icon Description

Camera shake Zoom indicator Zoom ratio Photo resolution when Intelli zoom is on Grid lines

Flash option Auto focus option Timer option m Shooting options Display type

3 Status icons
Icon Description

Intelli zoom is off Smart Filter Image Adjust Face detection Auto focus

2 Status icons
Icon Description

Available number of photos Available recording time Memory card not inserted (Internal memory)

Shooting mode Current date

Basic functions 20

Using the touch screen
Learn how to use the touch screen. Use the supplied touch pen to touch or drag on the screen.
Do not use sharp objects, such as pens or pencils, to touch the screen. You can damage the screen.

Touching
Touch an icon to select a menu or option.

Flicking
Gently flick the touch pen across the screen.

Smart Auto

Program

Scene

Smart Movie

Movie

Photo Editor

Album

Settings

Dragging
Touch and hold a part of the screen, and then drag the touch pen.
White Balance
Auto WB Daylight Cloudy

Basic functions 21

Using the touch screen
Selecting an option
• Drag the option list up or down until you find the desired option.

• The touch screen may not recognize your inputs if you touch multiple items at the same time.

Touch the option, and then touch o.
White Balance
Auto WB Daylight Cloudy

• The touch screen may not recognize your inputs if you touch the screen with your finger.

• When you touch or drag the screen, discolorations may occur. This is not a malfunction, but a characteristic of the touch screen. Touch or drag lightly to minimize the effect. • The touch screen may not work properly if you use the camera in extremely humid environments. • The touch screen may not work properly if you apply screen protection film or other accessories to the screen. • Depending on the viewing angle, the screen may appear dim. Adjust the brightness or viewing angle to improve the resolution.

• If an option has a setting button, touch the button to turn it on

or off.
Drive Smart Filter Image Adjust OIS

Basic functions 22

Setting the touch screen and sound
Learn how to change the basic screen display and the sound settings.

Setting the display type for the touch screen
You can select from three screen display types Each displays differently.

Setting the sound
Set your camera to emit or not to emit a sound when you perform functions.

1 2

In Shooting mode, touch

.

Select an option, and then touch o.
Display Set
Full Hide Guide Line

1 2 3

On the Home screen, touch Touch Sound.

.

Touch the setting button next to Beep Sound to turn on or off the beep.

Icon

Description

Full: Icons are always displayed. Hide: Icons are hidden if you perform no operation for 5 seconds (touch the screen to display the icons again). Guide Line: Grid lines are displayed. The grid lines are helpful for getting the photo aligned with a surface, such as the horizon or the edges of buildings.

Basic functions 23

Using the Home screen
You can select a shooting mode or access the settings menu by touching the icons on the Home screen.

Accessing the Home screen
In Shooting or Playback mode, press [HOME]. Press [HOME] again to return to the previous mode.

Icons on the Home screen
Icon Description

Smart Auto: Capture a photo using a scene mode selected automatically by the camera. (p. 33) Program: Capture a photo using manually setting options. (p. 38) Scene: Capture a photo using options that are preset for a specific scene. (p. 36) Smart Movie: Record a video using a scene mode selected automatically by the camera. (p. 40) Movie: Record a video. (p. 39) Photo Editor: Edit photos with various effects. (p. 94)

Smart Auto

Program

Scene

Smart Movie

1

Album: View files by category in Smart album. (p. 83) Settings: Adjust settings to match your preferences. (p. 108)

Movie

Photo Editor

Album

Settings

2
No. Description

Vignetting: Capture a photo or record a video with a vignetting effect. (p. 46) Beauty Shot: Capture a portrait with options to hide facial imperfections. (p. 37) Magic Frame shot: Capture a photo with various frame effects. (p. 43)

1 2

Touch an icon to access a mode or function. • Scroll to another page by dragging or flicking the touch pen on the screen. The number of the current page. ( )

Basic functions 24

Using the Home screen

Icon

Description

Rearranging icons
You can rearrange the icons on the Home screen in any order.

Photo Filter: Capture a photo with various filter effects. (p. 43) Movie Filter: Record a video with various filter effects. (p. 45) Night Shot: Capture a night scene using a shutter speed and and aperture value set automatically by the camera. (p. 37) Palette Effect: Record a video with palette effects. (p. 47) Close Up: Capture close-up photos of subjects. (p. 36) Simple Shot: Capture a photo with simple adjustments to brightness and color. (p. 34) Object Highlight: Capture a photo with the subject's background blurred. (p. 42) 3D Album: View files with 3D effects. (p. 84) Slide Show: View photos as a slide show with effects and music. (p. 88) Voice Recorder: Record and save a voice memo. (p. 48)

1

Touch and hold an icon.

Smart Auto

Program

Scene

Smart Movie

Movie

Photo Editor

Album

Settings

2

Drag it to a new location.
• To move an icon to another page, drag it to the left or right

edge of the screen. When you drop the icon to a new location, the other icons will neatly slide out of the way.

Smart Auto

Program

Scene

Smart Movie

Magazine: View files with page flip effect. (p. 84) DUAL IS: Reduce camera shake both optically and digitally to prevent blurred photos. (p.35)
Movie Album Settings

Basic functions 25

Capturing photos
Learn how to capture photos easily and quickly in Smart Auto mode.

1

On the Home screen, touch

.

3

Half-press [Shutter] to focus.
• A green frame means the subject is in focus. • A red frame means the subject is out of focus.

Smart Auto

Program

Scene

Smart Movie

Movie

Photo Editor

Album

Settings

2

Align your subject in the frame.

4

Press [Shutter] to capture a photo.
See page 30 for tips to get clearer photos.

Basic functions 26

Capturing photos

Zooming
You can capture close-up photos by adjusting the zoom. Your camera has a 5X Optical zoom, 2X Intelli zoom, and 5X Digital zoom. The Intelli zoom and Digital zoom cannot be used at the same time.

Digital zoom
If the zoom indicator is in the digital range, your camera is using the Digital zoom. By using both the Optical zoom and Digital zoom, you can zoom in up to 25 times. Digital range Zoom indicator Optical range
• The Digital zoom is available only in Program and Scene (except Text) modes. Zoom ratio Zoom in

• The Digital zoom is not available with a Smart Filter effect or Smart
Touch AF option.

• If you capture a photo with the Digital zoom, the photo quality may deteriorate. Zoom out

The available zoom ratio for videos differs from photo zoom ratio.

Basic functions 27

Capturing photos
Intelli zoom
If the zoom indicator is in the Intelli range, your camera is using the Intelli zoom. Photo resolution varies by how much you have zoomed in if you use the Intelli zoom. By using both the Optical zoom and Intelli zoom, you can zoom in up to 10 times. Intelli range Zoom indicator Optical range

Setting Intelli zoom

1 2

In Shooting mode, touch m. Touch the setting button next to Intelli Zoom.

Photo resolution when the Intelli zoom is on

• The Intelli zoom is available only in the Smart Auto, Program, and
Scene (except Text) modes.

• The Intelli zoom is not available when you use a Smart Filter effect or the
Smart Touch AF option.

• The Intelli zoom automatically turns on when you select the 4:3 aspect ratio. You can use the Digital zoom instead of the Intelli zoom by turning off the Intelli zoom. Intelli zoom is not available when you select the 16:9 aspect ratio. • The Intelli zoom helps you capture a photo with less quality deterioration than the Digital zoom. However, the photo quality may be lower than when you use the Optical zoom.

Basic functions 28

Capturing photos

Reducing camera shake (OIS)
Reduce camera shake optically in Shooting mode.

• OIS may not function properly when: you move your camera to follow a moving subject you use the Digital zoom there is too much camera shake the shutter speed is slow (for example, when you capture night scenes) - the battery is low - you capture a close-up shot • If you use the OIS function with a tripod, the vibration of the OIS sensor may blur your images. Deactivate the OIS function when you use a tripod. • If the camera is hit or dropped, the display will be blurry. If this occurs, turn off the camera, and then turn it on again. -

Before correction

After correction

1 2

In Shooting mode, touch m. Touch the setting button next to OIS.
Drive Smart Filter Image Adjust OIS

Basic functions 29

Tips for getting a clearer photo
Holding your camera correctly
Ensure nothing is blocking the lens.

Reducing camera shake
• Set the Optical Image Stabilization option to

reduce camera shake optically. (p. 29)
• Select the DUAL IS mode to reduce camera

shake both optically and digitally. (p.35)

Half-pressing the shutter button

When h is displayed

Half-press [Shutter] to adjust the focus. The camera adjusts the focus and exposure automatically. Camera shake The camera sets the aperture value and shutter speed automatically. Focus frame
• Press [Shutter] to capture the photo if the focus frame appears in green. • Change the composition and half-press [Shutter] again if the focus frame appears in red.

When you shoot in the dark, avoid setting the flash option to Slow Sync or Off. The aperture remains open longer and it may be harder to hold the camera steady long enough to take a clear picture. • Use a tripod or set the flash option to Fill in. (p. 55) • Set ISO sensitivity options. (p. 57)

Basic functions 30

Preventing your subject from being out of focus
It may be difficult to get your subject in focus when: - there is little contrast between the subject and background (for example, when your subject is wearing clothing that is similar in color to the background) - the light source behind the subject is too bright - the subject is shiny or reflective - the subject includes horizontal patterns, such as blinds - the subject is not positioned in the center of the frame
• When you capture photos in low light

Turn on the flash. (p. 55)

• When subjects are moving rapidly

Use the Continuous or Motion Capture function. (p. 71)

Use the focus lock Half-press [Shutter] to focus. When the subject is in focus, you can reposition the frame to change the composition. When you are ready, press [Shutter] to capture your photo.

Basic functions 31

Extended functions
Learn how to capture a photo, record a video, and record a voice memo by selecting a mode.

Using shooting modes …………………… 33
Using the Smart Auto mode ……………… Using the Simple Shot mode …………… Using the DUAL IS mode ………………… Using the Scene mode …………………… Using the Close Up mode ………………… Using the Night Shot mode ……………… Using the Beauty Shot mode …………… Using the Program mode ………………… Using the Movie mode …………………… Using the Smart Movie mode …………… 33 34 35 36 36 37 37 38 39 40

Using effect modes ………………………… 42
Using the Object Highlight mode ………… Using the Magic Frame Shot mode ……… Using the Photo Filter mode ……………… Using the Movie Filter mode ……………… Using the Vignetting mode ……………… Using the Palette Effect mode …………… 42 43 43 45 46 47

Recording voice memos

………………… 48 Recording a voice memo ………………… 48 Adding a voice memo to a photo ………… 49

Using shooting modes
Capture photos or record videos by selecting the best shooting mode for the conditions.

Using the Smart Auto mode
In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the type of scene it detects. The Smart Auto mode is helpful if you are not familiar with the camera settings for various scenes.

Icon

Description

Portraits at night Landscapes with backlighting Portraits with backlighting Portraits Close-up photos of objects Close-up photos of text Sunsets Clear skies Forested areas Close-up photos of colorful subjects Camera is stabilized or on a tripod (when shooting in the dark) Actively moving subjects Fireworks (when using a tripod)

1 2

On the Home screen, touch Align your subject in the frame.

.

• The camera automatically selects a scene and adjusts its

settings. An appropriate scene icon appears at the top left of the screen. The icons are listed below.

Icon

Description

Landscapes Scenes with bright white backgrounds Landscapes at night (when the flash is off)

Extended functions 33

Using shooting modes

3 4

Half-press [Shutter] to focus.
• In several scenes, the camera automatically captures a photo

Using the Simple Shot mode
In Simple Shot mode, you can capture photos with simple adjustments to brightness and color.

when you half-press [Shutter].

Press [Shutter] to capture the photo.
• If the camera does not recognize an appropriate scene mode, it uses • • • • the default settings for the Smart Auto mode. Even if it detects a face, the camera may not select a portrait mode depending on the subject's position or lighting. The camera may not select the correct scene depending on the shooting conditions, such as camera shake, lighting, or distance to the subject. Even if you use a tripod, the camera may not detect the mode if the subject is moving. In Smart Auto mode, the camera consumes more battery power, because it changes settings often to select appropriate scenes.

1 2

On the Home screen, touch

.

Drag the sliders to adjust Brightness and Color.

Brightness Color

3 4

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.

Extended functions 34

Using shooting modes

Using the DUAL IS mode
Reduce camera shake and prevent blurred photos with Optical and Digital Image Stabilization functions.

3

Press [Shutter] to capture the photo.
• The Digital zoom and Intelli-zoom are not available in DUAL IS mode. • The camera will optically correct photos only when the light source is brighter than fluorescent light.

• If your subject is moving rapidly, the photo may be blurry. • Set the Optical Image Stabilization option to reduce camera shake in different shooting modes. (p. 29)

Before correction

After correction

1

On the Home screen, touch

.

2

Align your subject in the frame, and then half-press [Shutter] to focus.

Extended functions 35

Using shooting modes

Using the Scene mode
In Scene mode, you can capture a photo with options that are preset for a specific scene.

Using the Close Up mode
In Close Up mode, you can capture close-up photos of subjects, such as flowers or insects.

1 2

On the Home screen, touch Touch a scene.
Option Description

.

1

On the Home screen, touch

.

Landscape: Capture still-life scenes and landscapes. Sunset: Capture scenes at sunset, with natural-looking reds and yellows. Dawn: Capture scenes at sunrise. Backlight: Capture backlit subjects. Beach & Snow: Reduce underexposed photos due to sunlight reflected from sand or snow. Text: Clearly capture text from printed or electronic documents.

2 3

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.

3 4

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.

Extended functions 36

Using shooting modes

Using the Night Shot mode
In Night mode, you can use a slow shutter speed to extend the time the shutter stays open. Increase the aperture value to prevent overexposure.

Using the Beauty Shot mode
In Beauty Shot mode, you can capture a portrait with options to hide facial imperfections.

1 2

On the Home screen, touch

.

Drag the dials on the screen in the arrow directions below to adjust shutter speed and aperture value.

1 2

On the Home screen, touch

.

Drag the sliders to adjust Face Tone and Face Retouch.
• For example, increase the Face Tone setting to make skin

appear lighter.

Shutter Speed Face Tone Face Retouch Aperture

3 4

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.
Use a tripod to prevent blurry photos.

3 4

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.
When using the Beauty Shot mode, the focus distance will be set to Auto Macro.

Extended functions 37

Using shooting modes

Using the Program mode
In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically.

Setting My screen
In Program mode, you can add shortcuts for your favorite options to the left side of the screen.

1 2

On the Home screen, touch

.

Touch m, and then set desired options. (For a list of options, refer to page 50.)

1 2

In Shooting mode, touch m

My screen

o.

Touch and hold one of the icons on the right.
EV

My screen

OK

Cancel

Reset

3 4

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.

Extended functions 38

Using shooting modes

3

Drag the icon into a desired box on the left.
• To remove shortcuts, drag an icon to the right.
EV

Using the Movie mode
In Movie mode, you can record high-definition videos of up to 20 minutes in length. The camera saves recorded videos as MP4 (H.264) files.
• H.264 (MPEG-4 part10/AVC) is a high-compression video format established by the international standard organizations ISO-IEC and ITU-T. • Some memory cards may not support high definition recording. If this occurs, set a lower resolution. • Memory cards with slow writing speeds will not support highresolution videos and high-speed videos. To record high-resolution or high-speed videos, use memory cards with faster writing speeds. • If you have activated Optical Image Stabilization, the camera may record the sounds the OIS makes when it operates.

My screen

OK

Cancel

Reset

4

Touch o to save.

1 2 3 4
You can create up to 3 shortcuts.

On the Home screen, touch

.

Touch m, and then set desired options. (For a list of options, refer to page 50.) Press [Shutter] or touch to start recording. to stop recording.

Press [Shutter] again or touch

Extended functions 39

Using shooting modes
Pause recording
The camera allows you to temporarily pause a video while recording. With this function, you can record separate scenes as a single video.
00:02 00:05

Using the Smart Movie mode
In Smart Movie mode, your camera automatically chooses the appropriate camera settings based on the scene it has detected.

1 2

On the Home screen, touch Align your subject in the frame.

.

• The camera automatically selects a scene and adjusts its

settings. An appropriate scene icon appears at the top left of the screen. The icon are listed below.

• Touch • Touch

to pause while recording. to resume.

Icon

Description

Landscapes Sunsets Clear skies Forested areas

Extended functions 40

Using shooting modes

3 4

Press [Shutter] or touch

to start recording. to stop recording.

Press [Shutter] again or touch

• If the camera does not recognize an appropriate scene mode, it uses the default settings for Smart Movie mode.

• The camera may not select the correct scene depending on the shooting conditions, such as camera shake, lighting, and distance to the subject. • In Smart Scene Detection mode, you cannot set Smart Filter effects.

Extended functions 41

Using effect modes
Capture photos or record videos with various effects.

Using the Object Highlight mode
The Object Highlight mode makes the subject more discernible by adjusting the depth of field.

4

Half-press [Shutter] to focus.
• When the camera can apply the Object Highlight effect,

will appear.
• When the camera cannot apply the Object Highlight effect,

1 2

On the Home screen, touch

.

will appear. If this occurs, adjust the distance from the camera to the subject.

Position the camera according to the optimum distance displayed on the screen.
• The optimum distance will vary, based on the zoom ratio you

5

Press [Shutter] to capture the photo.
• Available resolutions in Object Highlight mode are and . • If the shooting distance is not within the optimum range, you can capture a photo but the Object Highlight effect will not be applied.

use.

3

Drag the sliders to adjust Blur and Tone.

• The Object Highlight effect cannot be used in dark places. • The Object Highlight effect cannot be used with the Optical zoom at
3X or higher.

• Digital zoom is not available in Object Highlight mode. • Use a tripod to prevent camera shake as the camera captures 2
Blur Tone

consecutive photos to apply the effect.

• The subject and the background should have a significant contrast in color.

• Subjects should be positioned far away from the background for the greatest effect.

Extended functions 42

Using effect modes

Using the Magic Frame Shot mode
In Magic Frame Shot mode, you can apply various frame effects to your photos. The shape and the feel of the photos will change according to the frame you select.

Using the Photo Filter mode
In Photo Filter mode, you can apply various filter effects to your photos.

1 2

On the Home screen, touch Select a desired frame.

.

Miniature

Vignetting

Fish-eye

Sketch

3 4

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.
In Magic Frame Shot mode, the resolution is automatically set to .

1 2

On the Home screen, touch Touch a desired filter.

.

• To view the original photo, touch Before. • To view the photo with the filter effect, touch After.

Extended functions 43

Using effect modes

Option Fish-eye Defog Classic
Before After

Description

Blacken the edges of the frame and distort objects to imitate the visual effect of a fisheye lens. Make a photo clearer. Apply a black and white effect. Apply a sepia tone effect. Apply a negative film effect.

Retro Negative

Option Miniature Vignetting Soft-Focus Old Film 1 Old Film 2 Half Tone Dot Sketch

Description

Apply a tilt-shift effect to make the subject appear in miniature. Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Hide facial imperfections or apply dreamy effects. Apply vintage film effect 1. Apply vintage film effect 2. Apply a halftone effect. Apply a pen sketch effect.

3 4

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.
• To apply filter effects to saved photos, touch . • When you select Sketch, the resolution will change to

and below.

Extended functions 44

Using effect modes

Using the Movie Filter mode
In Movie Filter mode, you can record videos with various filter effects.

Option Fish-eye Defog Classic Retro Negative

Description

Distort close objects to imitate the visual effect of a fisheye lens. Make the image clearer. Apply a black and white effect. Apply a sepia tone effect. Apply a negative film effect.

1 2

On the Home screen, touch Touch a desired filter.

.

3 4

Press [Shutter] or touch

to start recording. to stop recording.

Press [Shutter] again or touch

• If you select Miniature, the speed of the video will increase. • If you select Miniature, the camera will not record sound. • If you select Miniature, Vignetting, Half Tone Dot, Sketch, Option Miniature Vignetting Description
Fish-eye, or Defog, the recording speed will be set to recording resolution will be set to less than . and the

Apply a tilt-shift effect to make the subject appear in miniature. Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras.

Half Tone Dot Apply a halftone effect. Sketch

Apply a pen sketch effect.

Extended functions 45

Using effect modes

Using the Vignetting mode
In Vignetting mode, you can capture a photo or record a video with a vignetting effect.

4 5

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.
To apply the vignetting effect to saved photos, touch .

1 2 3

On the Home screen, touch Select (photo) or

.

(movie).

Drag the sliders to adjust Level, Brightness, and Contrast.
• To view the original photo, touch Before. • To view the photo with the vignetting effect, touch After.

Level Brightness Contrast Before After

Extended functions 46

Using effect modes

Using the Palette Effect mode
In Palette Effect mode, you can record a video with effects to make specific colors stand out.

3 4

Press [Shutter] or touch

to start recording. to stop recording.

Press [Shutter] again or touch

1 2

On the Home screen, touch Touch a desired palette.

.

Option Palette Effect 1 Palette Effect 2 Palette Effect 3 Palette Effect 4

Description

Create a vivid look with sharp contrast and red color. Make scenes clean and clear by applying a soft blue tone. Apply a soft brown tone. Create a cold and monotone effect.

Extended functions 47

Recording voice memos
Learn how to record a voice memo that you can play back later. You can also add a voice memo to a photo to remind you of shooting conditions.
You will get the best sound quality when you speak 16 in (40 cm) away from the camera.

Recording a voice memo

3
.

Press [Shutter] again or touch
To view the list of saved voice memos, touch

to stop recording.
.

1 2

On the Home screen, touch Press [Shutter] or touch

to start recording.

• Touch to pause or touch to resume. • Each memo can be up to 10 hours long if memory is

available.

Extended functions 48

Recording voice memos

Adding a voice memo to a photo
In Program mode, you can add a voice memo to a captured photo.

4

Record a short voice memo (10 seconds maximum).
• Press [Shutter] to stop recording a voice memo before the

10 seconds are up.
You cannot add voice memos to photos in the burst mode.

1 2 3

On the Home screen, touch

.

Touch m, and then touch the setting button next to Memo. Align your subject in the frame, and then capture a photo.
• The camera begins to record a voice memo right after you

capture the photo.

Extended functions 49

Shooting options
Learn how to set the options in Shooting mode.

Selecting a resolution and quality ………… 51
Selecting a resolution …………………… 51 Selecting image quality …………………… 52

Using the timer ……………………………… 54 Shooting in the dark ……………………… 55
Preventing red-eye ……………………… 55 Using the flash …………………………… 55 Adjusting the ISO sensitivity ……………… 57

Detecting eye blinking …………………… 64 Using Smart Face Recognition …………… 64 Registering faces as your favorites (My Star) ………………………………… 65

Adjusting brightness and color …………… 67
Adjusting the exposure manually (EV) …… Compensating for backlighting (ACB) …… Changing the metering option …………… Selecting a light source (White balance) … 67 68 68 69

Changing the camera’s focus …………… 58
Using macro ……………………………… Using smart touch focus ………………… Using one touch shooting ………………… Adjusting the focus area ………………… 58 59 60 60

Using burst modes ………………………… 71 Applying effects/Adjusting images ……… 72
Applying Smart Filter effects ……………… 72 Adjusting your photos …………………… 75

Using face detection ……………………… 62
Detecting faces …………………………… 62 Capturing a self portrait shot ……………… 63 Capturing a smile shot …………………… 63

Reducing the sound of the zoom ………… 76 Available shooting options by shooting mode ………………………………………… 77

Selecting a resolution and quality
Learn how to change the image resolution and quality settings.

Selecting a resolution
As you increase the resolution, your photo or video will include more pixels so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase.

Icon

Description

4608 X 3456: Print on A1 paper. 4608 X 3072: Print on A1 paper in wide ratio (3:2). 4608 X 2592: Print on A1 paper in panorama ratio (16:9) or play back on an HDTV. 3648 X 2736: Print on A2 paper.

Setting the photo resolution

1 2

In Shooting mode, touch m

Photo Size.

2592 X 1944: Print on A4 paper. 1984 X 1488: Print on A5 paper. 1920 X 1080: Print on A5 paper in panorama ratio (16:9) or play back on an HDTV. 1024 X 768: Attach to an email.

Select an option, and then touch o.
Photo Size
4608 X 3072 4608 X 2592 3648 X 2736

Shooting options 51

Selecting a resolution and quality
Setting the video resolution

Selecting image quality
Movie Size.
Set the photo and video quality settings. Higher image quality settings will result in larger file sizes.

1 2

In Shooting mode, touch m

Select an option, and then touch o.
Movie Size
1280 X 720 HQ 1280 X 720 640 X 480

Setting the photo quality
The camera compresses and saves the photos you capture in the JPEG format.

1 2

In Shooting mode, touch m

Quality.

Select an option, and then touch o.
Quality
Super Fine

Icon

Description

Fine Normal

1280 X 720 HQ: Play back high-quality files on an HDTV. 1280 X 720: Play back on an HDTV. 640 X 480: Play back on an analog TV. 320 X 240: Post on a web page.
Icon

Description

Super Fine: Capture photos in super high quality. Fine: Capture photos in high quality. Normal: Capture photos in normal quality.

Shooting options 52

Selecting a resolution and quality
Setting the video quality
The camera compresses and saves the videos you record in the MP4 (H.264) format.

1 2

In Shooting mode, touch m

Frame Rate.

Select an option, and then touch o.
• As the frame rate increases, action appears more natural, but

the file size also increases.
Frame Rate

30 FPS 15 FPS

Icon

Description

30 FPS: Record 30 frames per second. 15 FPS: Record 15 frames per second.

Shooting options 53

Using the timer
Learn how to set the timer to delay shooting.

1 2

In Shooting mode, touch m

Timer.

3

Press [Shutter] to start the timer.
• The AF-assist light/timer lamp blinks. The camera will

Select an option, and then touch o.
Timer
10 Sec 2 Sec Double

automatically capture a photo at the specified time.
• Press [Shutter] to cancel the timer. • Depending on the Face Detection option you have selected, the timer function or some of its options may not be available.

• Self timer options are not available if you set burst options.

Icon

Description

Off: The timer is not active. 10 Sec: Capture a photo after a 10-second delay. 2 Sec: Capture a photo after a 2-second delay. Double: Capture one photo after a 10-second delay and another photo after a 2-second delay.
Available options may differ depending on the shooting mode.

Shooting options 54

Shooting in the dark
Learn how to capture photos at night or in low light conditions.

Preventing red-eye
If the flash fires when you capture a photo of a person in the dark, a red glow may appear in the person’s eyes. To prevent this, select Red-eye or Red-eye Fix. Refer to flash options in “Using the flash.”

Using the flash
Use the flash when you capture photos in the dark or when you need more light in your photos.

1 2

In Shooting mode, touch m

Flash.

Select an option, and then touch o.
Flash
Auto Red-eye Fill in

This option is available in Program, Beauty Shot, and Night Shot modes.

Icon

Description

Off: • The flash will not fire. • The camera will display the shake warning when you are shooting in low light. Auto: The flash will fire automatically when the subject or background is dark.

Shooting options 55

Shooting in the dark

Icon

Description

• Flash options are not available if you set burst options or select
Self-Portrait or Blink Detection.

Red-eye: • The flash will fire twice when the subject or background is dark to reduce the red-eye effect. • There is an interval between 2 bursts of the flash. Do not move until the flash fires a second time. Fill in: • The flash always fires. • The camera automatically adjusts the flash's intensity. Slow Sync: • The flash fires and the shutter stays open longer. • This option is recommended when you want to capture ambient light to reveal more details in the background. • Use a tripod to prevent your photos from blurring. • The camera will display the shake warning when you are shooting in low light. Red-eye Fix: • The flash fires twice when the subject or background is dark, and the camera corrects red-eyes through its advanced software analysis. • There is an interval between 2 bursts of the flash. Do not move until the flash fires a second time.
Available options may differ depending on the shooting mode.

• Make sure that your subjects are within the recommended distance from the flash. (p. 128)

• If light from the flash is reflected or there is a substantial amount of dust in the air, tiny spots may appear in your photo.

Shooting options 56

Shooting in the dark

Adjusting the ISO sensitivity
The ISO sensitivity is the measure of a film’s sensitivity to light as defined by the International Organization for Standardization (ISO). The higher ISO sensitivity you select, the more sensitive to light your camera becomes. With a higher ISO sensitivity, you can get a better photo without using the flash.

1 2

In Shooting mode, touch m

ISO.

Select an option, and then touch o.
• Select Auto to have the camera select an appropriate ISO

sensitivity automatically based on the brightness of the subject and lighting.
ISO
ISO 80 ISO 100 ISO 200

Higher ISO sensitivities may result in more image noise.

Shooting options 57

Changing the camera’s focus
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.

Using macro
Use macro to capture close-up photos of subjects, such as flowers or insects.

1 2

In Shooting mode, touch m

Focus.

Select Macro, and then touch o.
Focus
Normal (AF) Macro

Icon

Description

Normal (AF): Focus on a subject farther than 32 in (80 cm) from the camera. Macro: Manually focus on a subject that is 2-32 in (5-80 cm) from the camera (39-59 in [100-150 cm] when you use the zoom).
• Try to hold the camera firmly to prevent blurry photos. • Turn off the flash if the distance to the subject is less than 16 in
(40 cm).

Shooting options 58

Changing the camera’s focus

Using smart touch focus
Smart Touch AF allows you to track and auto focus on your subject, even when you are moving.

• If you do not touch any area on the screen, the focus frame will appear in the center of the screen.

• Tracking a subject may fail when:
- the subject is too small - the subject moves excessively - the subject is backlit or you are shooting in a dark place - colors or patterns on the subject and the background are the same - the camera shakes excessively When tracking a subject fails, the focus frame will appear as a white single-line frame ( ). If the camera fails to track the subject, you must reselect the subject to track. If the camera fails to focus, the focus frame will change to a red singleline frame ( ). If you use this function, you cannot set Self Timer options, Face Detection options, and Smart Filter options.

1 2 3

In Shooting mode, touch m

Focus Area.
• • • •

Select Smart Touch AF, and then touch o. Touch the subject you want to track in the touch area.

• The white frame means that your camera is tracking the

subject.
• The green frame means that your subject is in focus when you

half-press [Shutter].

Shooting options 59

Changing the camera’s focus

Using one touch shooting
You can focus on a subject and capture a photo with the touch of your finger.

Adjusting the focus area
You can get clearer photos by selecting an appropriate focus area according to your subject’s location in the scene.

1 2 3

In Shooting mode, touch m

Focus Area.

Select One Touch Shooting, and then touch o. Touch a subject to capture the photo.

1 2

In Shooting mode, touch m

Focus Area.

Select an option, and then touch o.
Focus Area
Multi AF One Touch Shooting Smart Touch AF

If you use this function, you cannot set Self Timer options, Burst options, and Smart Filter effects.

Shooting options 60

Changing the camera’s focus

Icon

Description

Center AF: Focus on the center of the frame (suitable when subjects are located at or near the center). Multi AF: Focus on one or more of 9 possible areas. One Touch Shooting: Focus on the subject and capture a photo by touching the image on the screen. (p. 60) Smart Touch AF: Focus on and track the subject that you touch on the screen. (p. 59)

Shooting options 61

Using face detection
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them.

• The camera automatically tracks the registered face. • Face Detection may not be effective when:
- the subject is far from the camera (The focus frame will appear orange for Smile Shot and Blink Detection.) - it is too bright or too dark - the subject is not facing the camera - the subject is wearing sunglasses or a mask - the subject’s facial expression changes drastically - the subject is backlit or the lighting conditions are unstable Face Detection is not available when you set Smart Filter effects or Smart Touch AF. Depending on the shooting options, available Face Detection options may differ. Depending on the Face Detection options you selected, the timer function may not be available or available timer options may differ. When you set Face Detection options, some Burst options are not available. When you capture photos of detected faces, they will be registered in the face list. You can view registered faces in order of priority in Playback mode. (p. 82) Even though faces are registered successfully, they may not be classified in Playback mode. A face detected in Shooting mode may not appear in the face list or Smart Album.

Detecting faces
Your camera automatically detects up to 10 human faces in one scene.

1 2

In Shooting mode, touch m

Face Detection.

Select Normal, and then touch o.

• • • • • • •

The nearest face appears in a white focus frame and the rest of the faces appear in gray focus frames.
• The closer you are to the subjects, the quicker your camera will detect faces. • To focus on a subject in a gray focus frame, touch the face in the frame. • The detected faces may not be registered if you set Burst options such as Continuous, Motion Capture, or AEB.

Shooting options 62

Using face detection

Capturing a self portrait shot
Capture photos of yourself. The focus distance will be set to close-up and your camera will emit a beep.

Capturing a smile shot
The camera automatically releases the shutter when it detects a smiling face.

1 2 3

In Shooting mode, touch m

Face Detection.

Select Self-Portrait, and then touch o. When you hear a quick beep, press [Shutter].

1 2 3

In Shooting mode, touch m

Face Detection.

Select Smile Shot, and then touch o. Compose your shot.
• The camera automatically releases the shutter when it detects

a smiling face.

When faces are located in the center, the camera beeps rapidly.
If you turn Volume off in the sound settings, the camera will not emit a beep. (p. 109)

When your subject smiles broadly, your camera can detect the smile more easily.

Shooting options 63

Using face detection

Detecting eye blinking
If your camera detects closed eyes, it will automatically capture 2 photos in succession.

Using Smart Face Recognition
The camera automatically registers faces that you frequently photograph. The Smart Face Recognition feature will automatically prioritize the focus on those faces and on favorite faces. The Smart Face Recognition feature is available only when you use a memory card.

1 2

In Shooting mode, touch m

Face Detection.

Select Blink Detection, and then touch o.

1 2

In Shooting mode, touch m

Face Detection.

Select Smart Face Recognition, and then touch o.

• Hold your camera still while “Capturing” is displayed on the screen. • If Blink Detection fails, the “Picture taken with eyes closed.” message appears. Capture another photo.

The nearest face appears in a white focus frame and the rest of the faces appear in gray focus frames. • : Faces that you have registered as favorites. (To register faces as favorites, refer to page 65.) • : Faces that the camera has automatically registered.

Shooting options 64

Using face detection

• The camera may recognize and register faces incorrectly depending on lighting conditions, drastic changes in the subject's pose or face, and whether or not the subject is wearing glasses. • The camera can automatically register up to 14 faces. If the camera recognizes a new face when 14 faces have already been registered, it will replace the lowest priority face with the new one. • The camera can detect up to 5 favorite faces in one scene.

Registering faces as your favorites (My Star)
You can register your favorite faces to prioritize the focus and exposure on those faces. This feature is available only when you use a memory card.

1 2 3

In Shooting mode, touch m

Smart FR Edit.

Select My Star, and then touch o. Align your subject’s face with the oval guideline, and then press [Shutter] to register the face.

• If the subject’s face is not aligned with the oval guideline, the white frame will not appear.

• Capture 5 photos of the subject’s face: one each from the front, left, right, above, and below.

• Capture photos of one person at a time when registering faces.

Shooting options 65

Using face detection

4

Touch

when the face list appears. on the face list.

• Your favorite faces are indicated with a

• You can register up to 6 favorite faces. • The flash will not fire when you register a favorite face. • If you register the same face twice, you can delete one of the faces in the face list.

Viewing your favorite faces

1 2

In Shooting mode, touch m

Smart FR Edit.

Select Face List, and then touch o.
• To change the ranking of your favorite faces, touch • To delete a favorite face, touch .
. (p. 82)

Shooting options 66

Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.

Adjusting the exposure manually (EV)
Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo.

• Once you adjust the exposure, the setting will be stored automatically.
You may need to change the exposure value later to avoid overexposure or underexposure. • If you cannot decide on an appropriate exposure, select AEB (Auto Exposure Bracket). The camera will capture 3 consecutive photos, each with a different exposure: normal, underexposed, and overexposed. (p. 71)

Darker (-)

Neutral (0)

Brighter (+)

1 2

In Shooting mode, touch m

EV.

Select a desired value, and then touch o.
• The photo will be brighter as exposure increases. • When you adjust the exposure value, the icon will appear as

shown below.

Shooting options 67

Adjusting brightness and color

Compensating for backlighting (ACB)
When the light source is behind your subject or there is high contrast between your subject and the background, your subject is likely to appear dark in the photo. If this occurs, set the Auto Contrast Balance (ACB) option.

• The ACB feature is always on in Smart Auto, Scene (Beach & Snow) modes. • The ACB feature is not available when you set Continuous, Motion
Capture, or AEB options.

Changing the metering option
The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select. Without ACB With ACB

1 2

In Shooting mode, touch m. Touch the setting button next to ACB.
Smart FR Edit Photo Size Quality ACB

1 2

In Shooting mode, touch m

Metering.

Select an option, and then touch o.
Metering
Multi Spot Center-weighted

Shooting options 68

Adjusting brightness and color

Icon

Description

Selecting a light source (White balance)
The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select a white balance setting that is appropriate for the lighting conditions, such as Auto WB, Daylight, Cloudy, or Tungsten.

Multi: • Your camera divides the frame into several areas, and then measures the light intensity of each area. • Suitable for general photos. Spot: • Your camera measures only the light intensity of the very center of the frame. • If a subject is not in the center of the frame, your photo may be improperly exposed. • Suitable for a subject with backlighting. Center-weighted: • Your camera averages the meter reading of the entire frame with emphasis placed on the center. • Suitable for photos with subjects in the center of the frame.

Auto WB

Daylight

Cloudy

Tungsten

Shooting options 69

Adjusting brightness and color

1 2

In Shooting mode, touch m

White Balance.

Defining your own White Balance
You can customize the White Balance by capturing a photo of a white surface, such as a piece of paper, under the lighting conditions in which you intend to capture a photo. The White Balance feature will help your camera reproduce the colors that are in the scene accurately in your photo.

Select an option, and then touch o.
White Balance
Daylight Cloudy Fluorescent_H

1 2 3

In Shooting mode, touch m

White Balance.

Select Custom Set, and then touch o. Aim the lens at a piece of white paper, and then press [Shutter].

Icon

Description

Auto WB: Automatically set the White Balance based on the lighting conditions. Daylight: For outdoor photos on a sunny day. Cloudy: For outdoor photos on a cloudy day or in shadows. Fluorescent_H: For shooting under a daylight fluorescent or 3-way fluorescent light. Fluorescent_L: For shooting under white fluorescent light. Tungsten: For shooting indoor photos under incandescent bulbs or halogen lamps. Custom Set: Use White Balance settings that you defined.

Shooting options 70

Using burst modes
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In these cases, select one of the burst modes to capture multiple photos rapidly.
Icon Description

Single: Capture a single photo. Continuous: • While you are pressing [Shutter], the camera continuously captures photos. • The maximum number of photos depends on the capacity of your memory card.

1 2

In Shooting mode, touch m

Drive.

Select an option, and then touch o.
Drive
Continuous Motion Capture AEB

Motion Capture: While you are pressing [Shutter], the camera captures VGA photos (6 photos per second; maximum of 30 photos). AEB: • Captures 3 consecutive photos, each with a different exposure: normal, underexposed, and overexposed. • Use a tripod to prevent blurry photos.
• You can use the flash, timer, ACB, and Smart Filter only when you select Single.

• When you select Motion Capture, your camera will set the resolution to VGA and set the ISO sensitivity to Auto.

• Depending on the Face Detection option you selected, some Burst options may not be available.

Shooting options 71

Applying effects/Adjusting images
Applying Smart Filter effects
Apply various filter effects to your photos and videos to create unique images. Available filters in Program mode
Icon Description

Normal: No effect Miniature: Apply a tilt-shift effect to make the subject appear in miniature. Vignetting: Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras.

Miniature

Vignetting

Soft-Focus: Hide facial imperfections or apply dreamy effects. Old Film 1: Apply vintage film effect 1. Old Film 2: Apply vintage film effect 2. Half Tone Dot: Apply a halftone effect. Sketch: Apply a pen sketch effect.

Fish-eye

Sketch

Fish-eye: Blacken the edges of the frame and distort objects to imitate the visual effect of a fisheye lens.
Defog: Make a photo clearer.

1 2

In Shooting mode, touch m

Smart Filter.

Classic: Apply a black and white effect.

Select a filter, and then touch o.

Shooting options 72

Applying effects/Adjusting images

Icon

Description Retro: Apply a sepia tone effect. Negative: Apply a negative film effect.

Icon

Description

Sketch: Apply a pen sketch effect. Fish-eye: Distort close objects to imitate the visual effect of a fisheye lens.
Defog: Make the images clearer.

Custom RGB: Customize a color value.

Available filters in Movie mode
Icon Description

Classic: Apply a black and white effect. Retro: Apply a sepia tone effect. Negative: Apply a negative film effect.

Normal: No effect
Palette Effect 1: Create a vivid look with sharp contrast and

Custom RGB: Customize a color value.

red color.
Palette Effect 2: Make scenes clean and clear by applying

a soft blue tone.
Palette Effect 3: Apply a soft brown tone. Palette Effect 4: Create a cold and monotone effect.

Miniature: Apply a tilt-shift effect to make the subject appear in miniature. Vignetting: Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras.
Half Tone Dot: Apply a halftone effect.

Shooting options 73

Applying effects/Adjusting images
Defining your own RGB tone

• If you select Miniature when you are recording a video, the speed of the video will increase.

1 2 3

In Shooting mode, touch m

Smart Filter.

• If you select Miniature when you are recording a video, the camera will not record sound.

Select Custom RGB, and then touch o. Drag up or down to adjust the values of each color.
• The higher the value, the brighter the photo. • The lower the value, the darker the photo.
Custom RGB

• If you select Miniature, Vignetting, Half Tone Dot, Sketch,
Fish-eye, or Defog while recording a video, the recording speed will and the recording resolution will be set to less than . be set to • If you set Smart Filter effects, you cannot use the Face Recognition options, ACB, burst options, Image Adjustment options, Intelli zoom, or Smart Touch AF. • If you select Sketch when you capture a photo, the photo resolution will change to and below.

4

Touch o to save your changes.

Shooting options 74

Applying effects/Adjusting images

Adjusting your photos
Adjust the sharpness, saturation, or contrast of your photos.

3
Image Adjust.

Touch o to save your changes.
Sharpness Description

1 2

In Shooting mode, touch m
• • •

+

Soften the edges on your photos (suitable for editing the photos on your computer). Sharpen the edges to improve the clarity of your photos. This may also increase the noise on your photos.
Description

Drag up or down to adjust each value.
: Sharpness : Contrast : Saturation
Image Adjust

Contrast

+
Saturation

Decrease the color and brightness. Increase the color and brightness.
Description

+

Decrease the saturation. Increase the saturation.

• Select 0 if you do not want to apply any effects (suitable for printing). • If you set adjustment functions, you cannot use Smart Filter options.

Shooting options 75

Reducing the sound of the zoom
When you use the zoom while recording videos, the camera can record the sound of the zoom in the videos. Use the Sound Alive function to reduce the zoom noise.

1 2

In Shooting mode, touch m

Voice.

Select an option, and then touch o.
Voice Sound Alive On Sound Alive Off Mute

Icon

Description

Sound Alive On: Turn on the Sound Alive function. Sound Alive Off: Turn off the Sound Alive function. Mute: Do not record sounds.
• Do not block the microphone when you use the Sound Alive function. • Recordings made with Sound Alive may differ from actual sounds.

Shooting options 76

Available shooting options by shooting mode
For details about shooting options, refer to "Shooting options".
Smart Auto Resolution Quality Timer Flash ISO sensitivity Macro Focus area Face detection EV ACB Metering White balance Drive Smart filter Image adjust Sound Alive Digital zoom Intelli zoom OIS Voice memo Simple Shot Dual IS Scene Close Up Night Shot Beauty Shot Program Movie

O -

O O O

O O O O -

O O O -

O O O -

O O O O -

O O O O -

O O O O O O O O O O O O O O O O O

O O O O O O O O -

O -

O -

O -

O -

In these modes, some options are limited or a certain option is set by default. O All options are available.

Shooting options 77

Available shooting options by shooting mode

Smart Movie Resolution Quality Timer Flash ISO sensitivity Macro Focus Area Face detection EV ACB Metering White balance Drive Smart filter Image adjust Sound Alive Digital zoom Intelli zoom OIS Voice memo

Object Highlight

Magic Frame shot

Photo Filter

Movie Filter

Vignetting (photo)

Vignetting (movie)

Palette Effect

O O O O O O O

O O O O -

O O O

O -

O O O

O O -

O O O O -

O -

O O -

O -

O O -

In these modes, some options are limited or a certain option is set by default. O All options are available.

Shooting options 78

Playback/Editing
Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, TV, or HDTV.

Viewing photos or videos in Playback mode ………………………………………… 80
Starting Playback mode ………………… Viewing photos …………………………… Playing a video …………………………… Playing a voice memo …………………… Resizing photos …………………………… Rotating a photo ………………………… Using Smart Crop ………………………… Applying Smart Filter effects ……………… Adjusting your photos …………………… Creating a print order (DPOF) …………… 80 87 89 91 92 93 93 94 94 96

Transferring files to your Windows computer …………………………………… 99
Transferring files with Intelli-studio ……… 100 Transferring files by connecting the camera as a removable disk ……… 102 Disconnecting the camera (for Windows XP) ……………………… 103

Editing a photo ……………………………… 92

Transferring files to your Mac computer

104

Printing photos with a PictBridge photo printer ……………………………… 105

Viewing files on a TV or HDTV …………… 97

Viewing photos or videos in Playback mode
Learn how to play back photos, videos, or voice memos and how to manage files.

Starting Playback mode
View photos or play videos and voice memos stored in your camera.

2

Drag the image left or right to move to another file.

1

Press [Playback].

• To skip files quickly, tilt the camera in the direction you want to

flip files. (p. 81)
• You can also touch and hold the left end or right end of the

screen to skip files quickly.
• The most recent file will be displayed. • If the camera is off, it will turn on and display the most recent • You can also drag the slider left or right to move to the

previous or next file.

file.
To view files by category, touch on the Home screen. (p. 83)

Playback/Editing 80

Viewing photos or videos in Playback mode
• Motion recognition may not work well if you hold the camera

• If you want to view files stored in the internal memory, remove your memory card. • The camera will not play back files of unsupported sizes or files that were captured with other cameras properly.

with the screen parallel to the ground.

Viewing files with motion recognition
You can view files by tilting the camera in Playback mode.

• When you rotate the camera 90° or 180° while you view a

photo, the camera will automatically change the orientation of the displayed photo. (p. 112) • To deactivate motion recognition, touch m, and then touch the setting button next to Gesture View.

Playback/Editing 81

Viewing photos or videos in Playback mode
Display in Playback mode Ranking your favorite faces
You can rank your favorite faces or delete them. The favorite face feature is available only when you insert a memory card into the camera.

1
File Information File Location
Icon Description

In Playback mode, touch m

Face List.
Face List.

• In Thumbnail view or Smart album, touch m
Face List

Photo includes a voice memo Play videos (p. 89) or voice memos (p. 91) Folder name – File name Video length Protected file Print order has been set (DPOF) Delete files (p. 86) Play a slide show (p. 88) View files as thumbnails (p. 85)
To display file information on the screen, touch m, and then touch the setting button next to File Information.

Playback/Editing 82

Viewing photos or videos in Playback mode

2

To change the rank of a face, touch drag the face to a new location.
Edit Ranking

Yes, and then

Viewing files in Smart album as thumbnails
View files by category, such as date, face, or file type.

1 2

On the Home screen, touch Touch

.

a category option.

3

Touch o to save your changes.
• To delete a face from the list, touch

, touch the face, and
Icon Description

then touch o.
Touch to view only your favorite faces in the face list.

View all files. View files by the date they were saved. View files by recognized faces and favorite faces. View files by the file type.
• It may take some time for the camera to open Smart album, change the category, or reorganize files.

• If you delete a category, all files in the category will be deleted.

Playback/Editing 83

Viewing photos or videos in Playback mode
Viewing files in 3D view Viewing files with the page flip effect

1 2

On the Home screen, touch

.

Drag images left or right to move to the previous or next file.
• Flick the screen left or right to switch files more quickly. The

You can flip through files by dragging or flicking the touch pen across the screen. You can also run a slide show with the flip page effect by touching the slide show icon on the left side.

faster you flick the screen, the more files you will scroll through at a time.

1 2 3

On the Home screen, touch

.

Touch a theme (Travel, Wedding, or Party). Drag images to the left or right to move to the previous or next file.

4/5

• You cannot play movies or voice memos in 3D view. • The 3D feature is not available while the camera is connected to a TV.

Playback/Editing 84

Viewing photos or videos in Playback mode

Icon

Description

Play a slide show. • Touch the screen to pause the slide show and adjust the volume or mute the sound. • Touch to stop the slide show. Return to the theme selection screen.

Touch a file to display it in full screen view.

You can view only photos when you use the page flip effect.

Icon

Description

Delete files Photo includes a voice memo

Viewing files as thumbnails
Scan thumbnails of files. In Playback mode, push [Zoom] down to view thumbnails (9 at a time). Push [Zoom] down once or twice more to display more thumbnails (16 or 36 at a time). Push [Zoom] up to return to the previous view.

Video file Voice memo file

Drag the screen up or down to move to the previous or next page of thumbnails.

Playback/Editing 85

Viewing photos or videos in Playback mode
Protecting files
Protect your files to prevent accidental deletion.

Deleting files
Select files to delete in Playback mode. Deleting a single file You can select one file, and then delete it.

1 2

In Playback mode, locate the file you want to protect, and then touch m. Touch the setting button next to Protect.
Delete Start Slide Show Protect Resize

1 2

In Playback mode, locate the file you want to delete, and then touch . When the pop-up message appears, touch Yes.
You can also delete a file by touching m Delete Delete o Yes.

Deleting multiple files You can select multiple files, and then delete them at once.
You cannot delete or rotate a protected file.

1 2 3

In Thumbnail view, touch . Select the files you want to delete, and then touch When the pop-up message appears, touch Yes.
When you sort files by category, deleting a category will delete all files in that category.

.

Playback/Editing 86

Viewing photos or videos in Playback mode
Deleting all files You can select all files, and then delete them at once.

Viewing photos
Enlarge part of a photo or view photos as a slide show.

1 2 3

In Playback mode, touch m Select All, and then touch o.

Delete.
Delete.

• In Thumbnail view or Smart album, touch m

Enlarging a photo

When the pop-up message appears, touch Yes.

In Playback mode, push [Zoom] up to enlarge a portion of the photo. Push [Zoom] down to zoom out.

Copying files to a memory card
Copy files from the internal memory to a memory card.

1 2 3

In Playback mode, touch m.
• In Thumbnail view or Smart album, touch m

Copy to

Drag the screen to see another part of the photo.

Card.

Touch Copy to Card. When the pop-up message appears, touch Yes.

Playback/Editing 87

Viewing photos or videos in Playback mode
Playing a slide show
Apply effects and audio to a slide show of your photos. The slide show function does not work for videos or voice memos.

Icon

Description

Delete the file. Crop the photo (the camera will save it as a new file). Return to the original view. Zoom ratio (The maximum zoom ratio differs depending on the photo resolution.)
When you view photos that were captured by another camera, the zoom ratio may differ.

1 2 3

On the Home screen, touch

. A picture appears.

Touch , on the bottom right of the screen. A screen with thumbnails appears. Select the photos you want to include in your slide show.
• Touch an individual photo to select it. Touch it again to • • • •

deselect it. Touch to select all. Touch to cancel your selections. You cannot select video files. You can select up to 2,000 files.

4 5

Touch o. Touch m, and then set a slide show effect.

All Play

Playback/Editing 88

Viewing photos or videos in Playback mode
* Default

Playing a video
In Playback mode, you can view a video, and then capture or trim parts of the playing video. You can save the captured or trimmed segments as new files.

Icon

Description

Play Mode: Set whether or not to repeat the slide show. (One Play*, Repeat) Interval: • Set the interval between photos. (1 sec*, 3 sec, 5 sec, 10 sec) • You must set the Effect option to interval. Music: Set background audio. (Off*, Mist, Drops, Muse, Trip, Fall) Effect: • Set a scene change effect between photos. (Off*, Calm, Shine, Relax, Lively, Sweet) • Select to cancel effects. • When you use the Effect option, the interval between photos will be set to 1 second.

to set the

1 2

In Playback mode, locate a video, and then touch View the video.

.

Icon

Description

6

Touch

to start the slide show.
/

Scan backward. Pause or resume playback. Scan forward. Adjust the volume or mute the sound. Return to Playback mode.

• Touch the screen to pause the slide show. • Touch to adjust the volume or mute the sound. • Touch to stop the slide show.

Playback/Editing 89

Viewing photos or videos in Playback mode
Trimming a video Capturing an image from video

1 2 3

While viewing a video, touch want the trimming to begin. Touch Touch end. .

at the point where you

1 2 3

While viewing a video, touch want to capture an image. Touch .

at the point where you

at the point where you want the trimming to

When the pop-up message appears, touch Yes.
• The resolution of the captured image will be the same as the original video. • You can also adjust the scene to be cropped by dragging the

handles that appear on the progress bar.

• The captured image is saved as a new file.

4 5

Touch

.

When the pop-up message appears, touch Yes.
• The original video should be at least 10 seconds long. • The camera will save the edited video as a new file.

Playback/Editing 90

Viewing photos or videos in Playback mode

Playing a voice memo
Listening to a voice memo

Playing voice memos that are attached to photos

1 2

In Playback mode, locate a photo that includes a voice memo, and then touch . Listen to the voice memo.

1 2

In Playback mode, locate a voice memo file, and then touch . Listen to the voice memo.

Icon

Description

/
Icon Description

Pause or resume playback. Adjust the volume or mute the sound. Return to Playback mode.

Scan backward. / Pause or resume playback. Scan forward. Adjust the volume or mute the sound. Return to Playback mode.

Playback/Editing 91

Editing a photo
Learn how to edit photos.
• The camera will save edited photos as new files. • When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to a lower resolution. Rotated photos overwrite the original files.

Resizing photos
Change the size of a photo and save it as a new file. You can also select a photo to be displayed when the camera turns on.

3

Touch o to save.
Available resize options differ depending on the original size of the photo.

1 2

In Playback mode, locate a photo, and then touch m. Touch Resize, and then select a size option.
• Select Start Image to save the photo as a start image.

(p. 109)
Resize
1984 X 1488 1024 X 768 Start Image

Playback/Editing 92

Editing a photo

Rotating a photo

Using Smart Crop
Use Smart Crop to select objects in a photo and save the cropped area as a new file.

1 2

In Playback mode, locate a photo, and then touch m. Touch Rotate, and then select a rotate option.
Rotate
Rotate Right 90˚ Left 90˚

1 2 3

In Playback mode, locate a photo, and then touch m. Touch Smart Crop. Touch 4 points on the screen to select an area.
• You can re-select the area by dragging the 4 points.

3

Touch o to save.
The camera will overwrite the original file.

4

Touch o to save.
• The cropped photo is saved as a new file.
The size of the new file may be smaller than the original.

Playback/Editing 93

Editing a photo

Applying Smart Filter effects
Apply special effects to your photos.

Adjusting your photos
Learn how to adjust the brightness, contrast, or saturation and how to correct the red-eye effect. If the center of a photo is dark, you can adjust it to be brighter. The camera will save an edited photo as a new file, but may convert it to a lower resolution.
• You can adjust brightness, contrast, and saturation and apply Smart
Filter effects at the same time.

1 2 3 4

On the Home screen, touch Touch Touch m Select a filter. a photo. Smart Filter.

.

• The most recent file will be displayed.

• You cannot apply the ACB, Face Retouch, and Red-eye Fix effects at the same time.

• To see available filter options, refer to page 72. • To view the original photo, touch Before. • To view the photo with the filter effect, touch After.

Adjusting brightness, contrast, or saturation

1 2 3
Before After

On the Home screen, touch Touch Touch m
Icon

.

• The most recent file will be displayed.

a photo. an adjusting option.

Description

Brightness Contrast

5

Touch V to save your changes or touch without saving.

to exit

Saturation

Playback/Editing 94

Editing a photo

4 5

Drag the slider left or right to adjust the option.
• To view the original photo, touch Before. • To view the adjusted photo, touch After.

Retouching faces

1 2 3 4

On the Home screen, touch Touch Touch m a photo. Face Retouch.

.

Touch V to save your changes.

• The most recent file will be displayed.

Adjusting dark subjects (ACB)

1 2 3 4

On the Home screen, touch Touch Touch m a photo. ACB.

.

• The most recent file will be displayed.

Drag the slider to the left (darker) or right (lighter) to adjust the skin tone.
• As the slider moves to the right, the skin tone becomes brighter. • To view the original photo, touch Before. • To view the adjusted photo, touch After.

• To view the original photo, touch Before. • To view the adjusted photo, touch After.

5

Touch V to save your changes.

Touch V to save your changes.

Playback/Editing 95

Editing a photo
Removing red-eye

3
.

1 2 3 4

On the Home screen, touch Touch Touch m a photo. Red-eye Fix.

Touch / to select the number of copies, and then touch o.

• The most recent file will be displayed.

• To view the original photo, touch Before. • To view the adjusted photo, touch After.

Touch V to save your changes.
• You can take the memory card to a print shop that supports DPOF
(Digital Print Order Format) or you can print photos directly through a DPOF-compatible printer at home. • Photos with dimensions that are wider than the paper may be cut off on the left and right edges. Ensure that your photo dimensions are compatible with the paper you select. • You cannot set DPOF options for photos stored in the internal memory.

Creating a print order (DPOF)
Select photos to print and save print options in the Digital Print Order Format (DPOF). This information is saved in the MISC folder on your memory card for convenient printing on DPOFcompatible printers.

1 2

In Playback mode, locate a photo, and then touch m. Touch DPOF.

Playback/Editing 96

Viewing files on a TV or HDTV
Play back photos or videos by connecting your camera to a TV with the A/V cable.

1 2 3 4 5

On the Home screen, touch Touch Connectivity

.

7 8

Turn on your camera.
• The camera automatically enters into Playback mode when

Video Out.

you connect it to a TV.

Select the appropriate video signal output for your country or region. (p. 110) Turn off your camera and TV. Connect your camera to your TV with the A/V cable.
Audio Video

View photos or play videos using the touch screen on your camera.
• Depending on the TV model, you may see some digital noise or part of an image may not appear.

• The camera automatically enters Playback mode when you connect it to a TV.

6

Turn on your TV, and then select a video output mode and the video source (AV 1, etc.) with the TV remote control.

Playback/Editing 97

Viewing files on a TV or HDTV
Viewing files on an HDTV
You can view high-quality and uncompressed photos or videos on an HDTV using the optional HDMI cable. HDMI (High Definition Multimedia Interface) is supported by most HDTVs. For details, see the HDMI Kit manual.

6

Turn on your camera and your TV.
• If you have an Anynet+ compatible Samsung HDTV, the HDTV

will turn on automatically and display the camera screen.
• If you turn Anynet+ off, the HDTV does not turn on

automatically.

1 2 3 4 5

On the Home screen, touch Touch Connectivity

.

7 8

HDMI Output.

If your TV does not have Anynet +, use your TV remote to select the video source (HDMI 1, HDMI2, etc.). View files using the touch screen on your camera. If you have Anynet+, you can use your TV's remote.
• If your HDTV supports the Anynet+(CEC) profile, turn Anynet+ on in the camera’s settings menu (p.110) to control the camera and TV with the TV’s remote control.

Select an HDMI resolution. Turn off your camera and HDTV. Connect your camera to your HDTV using an optional HDMI cable.

• Anynet+ lets you control all connected Samsung A/V devices with the
TV remote control.

• The time it takes for the camera to connect to your HDTV may vary with the type of microSD or microSDHC card you use. A faster microSD or microSDHC card will not necessarily result in a faster HDMI transfer, because the main function of the card is to improve transfer rates during shooting.

Playback/Editing 98

Transferring files to your Windows computer
Transfer files to your Windows computer, edit them with Intelli-studio, and upload them to the web.

Requirements
Item CPU RAM OS Hard disk capacity Requirements

• The requirements are recommendation only. Intelli-studio may not work properly even when the computer meets the requirements, depending on the condition of your computer. • If your computer does not meet the requirements, videos may not play correctly or it may take longer to edit videos. • Install DirectX 9.0c or above before you use the program. • Your computer must be running Windows XP, Windows Vista, or Windows 7 for you to connect the camera as a removable disk. (p. 102 and p. 99)

Intel Pentium 4, 3.2 GHz or higher/AMD Athlon™ FX 2.6 GHz or higher Minimum 512 MB RAM (1 GB or more recommended) Windows XP SP2, Windows Vista, or Windows 7 (32-bit editions) 250 MB or more (1 GB and above recommended)
• CD-ROM drive • 1024 X 768 pixels, 16-bit color display compatible

Samsung is not responsible for any damage that results from using a computer that do not meet the requirements such as a computer you have assembled yourself.

Others

monitor (1280 X 1024 pixels, 32-bit color display recommended) • USB 2.0 port • nVIDIA Geforce 7600GT or higher/ATI X1600 series or higher • Microsoft DirectX 9.0c or higher

* The programs may not work properly on 64-bit editions of Windows XP, Windows Vista, and Windows 7.

Playback/Editing 99

Transferring files to your Windows computer

Transferring files with Intelli-studio
Intelli-studio will start automatically when you connect the camera to your computer with the USB cable.
The battery will charge while the camera is connected to a computer with the USB cable.

5

Turn on the camera.
• The computer recognizes the camera automatically and Intelli-

studio launches automatically.
If you set the USB option to Select Mode, select Computer in the pop-up window.

1 2 3 4

On the Home screen, touch

.

6

Select a destination folder on your computer, and then select Yes.
• New files stored on the camera will automatically transfer to

Touch Connectivity, and then turn on PC Software by touching the setting button. Turn off the camera. Connect the camera to your computer with the USB cable.
You must plug the end of the cable with the indicator light ( ) into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.

the selected folder.
• If your camera has no new files, the pop-up window for saving

new files will not appear.
For Windows Vista and Windows 7, select Run iStudio.exe from the Auto Play window to start Intelli-studio.

Playback/Editing 100

Transferring files to your Windows computer
Using Intelli-studio
Intelli-studio is a built-in program that allows you to play back and edit files. For details, select Help Help on the program toolbar.
• To enjoy more features, such as creating slide shows with templates, install the full version of Intelli-studio by selecting Web Support • • • •

Update Intelli-studio Start Update from the program toolbar. You can update the firmware of your camera by selecting Web Support Upgrade firmware for the connected device from the program toolbar. If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool Install Intelli-studio on PC. You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing. Intelli-studio supports the following formats: - Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG) - Photos: JPG, GIF, BMP, PNG, TIFF

1 % $

2

3

4

5 6 7

#

8

9 @ 0

!
Playback/Editing 101

Transferring files to your Windows computer

No.

Description

1 2 3 4 5 6 7 8 9 0 ! @ # $ %

Open menus. Display files in the selected folder. Switch to the Photo edit mode. Switch to the Video edit mode. Switch to the Sharing mode. (to send files by email or upload files to websites, such as Flickr or YouTube) Enlarge or reduce the thumbnails in the list. Select a file type. View files in the selected folder on your computer. Show or hide files on the connected camera. View files in the selected folder on the camera. View files as thumbnails or on a map. Browse folders stored on the camera. Browse folders stored on your computer. Move to the previous or next folder. Print files, view files on a map, store files in My Folder, or register faces.

Transferring files by connecting the camera as a removable disk
Connect the camera to your Windows computer as a removable disk.

1 2 3 4

On the Home screen, touch

.

Touch Connectivity, and then turn off PC Software by touching the setting button. Turn off the camera. Connect the camera to your computer with the USB cable.
You must plug the end of the cable with the indicator light ( ) into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.

Playback/Editing 102

Transferring files to your Windows computer

5

Turn on the camera.
• The computer recognizes the camera automatically.
If you set the USB option to Select Mode, select Computer in the pop-up window.

Disconnecting the camera (for Windows XP)
For Windows Vista and Windows 7, the methods for disconnecting the camera are similar.

1 2

If the status lamp on your camera is blinking, wait until it stops. Click on the tool bar at the bottom right of your computer screen.

6 7

On your computer, select My Computer Disk DCIM 100PHOTO. Drag or save files to your computer.

Removable

3 4 5

Click the pop-up message. Click the message box indicating safely removed. Remove the USB cable.
The camera may not disconnect safely while Intelli-studio is running. End the program before disconnecting the camera.

Playback/Editing 103

Transferring files to your Mac computer
When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer files directly from the camera to the computer without installing any programs.
Mac OS 10.4 or later is supported.

1

Connect your camera to a Macintosh computer with the USB cable.
You must plug the end of the cable with the indicator light ( ) into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.

2

Turn on the camera.
• The computer recognizes the camera automatically and

displays a removable disk icon.
If you set the USB option to Select Mode, select Computer in the pop-up window.

3 4

Double-click the removable disk icon. Drag or save files to your computer.

Playback/Editing 104

Printing photos with a PictBridge photo printer
Print photos with a PictBridge compatible printer by connecting your camera directly to the printer.

1 2 3

On the Home screen, touch Touch Connectivity USB

. Printer.

7

Touch
• Touch

to print. to print all photos.

Turn on the printer, and then connect your camera to the printer with the USB cable.

8 4 5 6
If the camera is off, press [POWER] or [Playback] to turn it on.
• The printer recognizes the camera automatically.

When the pop-up window appears, touch Yes to begin printing.
• To cancel printing, touch Cancel on the pop-up window.

Select a file to print. Touch / to select the number of copies.
• To set printer options, touch m. (p. 106)

Playback/Editing 105

Printing photos with a PictBridge photo printer
Configuring print settings
Press m to configure print settings.
Size Layout Type Quality

Icon

Description

Size: Set the print size. Layout: Set the number of photos to be printed on a single sheet of paper. Type: Set the type of paper. Quality: Set the print quality. Date: Set to print the date. File Name: Set to print the file name. Reset: Reset settings to their default values.

Some options may not be supported by some printers.

Playback/Editing 106

Settings
Refer to options to configure your camera’s settings.

Settings menu ………………………………………… 108
Accessing the settings menu ……………………… 108 Sound ……………………………………………… 109 Display ……………………………………………… 109 Connectivity ………………………………………… 110 General ……………………………………………… 111

Settings menu
Learn to configure your camera's settings.

Accessing the settings menu

3

Touch an item.
General
Language Time Zone English Home

1 2

On the Home screen, touch Touch a menu.
Settings
Sound Display Connectivity General

.

Date/Time Set Date Type Off

4

Select an option, and then touch o.
Date Type

Icon

Description

YYYY/MM/DD MM/DD/YYYY DD/MM/YYYY Off

Sound: Set various camera sounds and the volume. (p. 109) Display: Customize the display settings. (p. 109) Connectivity: Set the connection options. (p. 110) General: Change the settings for the camera system such as memory format and default file name. (p. 111)

5

Touch

to return to the previous screen.

Settings 108

Settings menu

Sound
* Default

Display
* Default

Item Volume Beep Sound Shutter Sound Start Sound AF Sound

Description

Item

Description

Set the volume of any sound. (Off, Low, Medium*, High) Set to emit sounds when you touch the screen or switch modes. (Off, On*) Set the sound the camera emits when you press the shutter button. (Off, 1*, 2, 3) Set the sound the camera emits when you turn on your camera. (Off*, 1, 2, 3) Set to emit a sound when you half-press the shutter button. (Off, On*)
Guide Line Start Image

Set a start image to display when the camera turns on. • Off*: Display no start image. • Logo: Display a default image stored in the internal memory. • User Image: Display a custom image. (p. 92)
• The camera will save only one User Start Image in the internal memory at a time.

• If you select a new photo as a User Start Image or reset your camera, the camera will delete the current image.

Set a grid to help you compose a scene. (2 X 2*, 3 X 3, X, +)

Settings 109

Settings menu

Connectivity
* Default * Default

Item Display Brightness

Description

Item

Description

Adjust the brightness of the screen. (Auto*, Dark, Normal, Bright)
Normal is fixed in Playback mode even if you have selected Auto.

Video Out

Quick View

Set the duration for reviewing a captured image before returning to the Shooting mode. (Off, 0.5 sec*, 1 sec, 3 sec) If you perform no operations for 30 seconds, the camera automatically switches to Power save mode. (Off*, On)

Set the video signal output for your region. • NTSC*: USA, Canada, Japan, Korea, Taiwan, Mexico • PAL (supports only BDGHI): Australia, Austria, Belgium, China, Denmark, England, Finland, Germany, Italy, Kuwait, Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain, Sweden, Switzerland, Thailand

Power Save

• In Power save mode, press any button other than [POWER] to resume using the camera.

• Even if you do not set the Power save mode, the screen will dim 30 seconds after the last operation to save power.

Set whether or not to control the camera with a TV remote control when you connect it to an HDTV that supports the Anynet+(CEC) profile. Anynet+ (HDMI• Off: View files without using an HDTV remote CEC) control. • On*: Control the camera with an HDTV remote control.

Settings 110

Settings menu

General
* Default * Default

Item

Description

Item Language Time Zone Date/Time Set Date Type

Description

Set the resolution of photos when the camera plays back files on an HDTV via the HDMI cable. (NTSC: 1080i*, 720p, 480p/PAL: 1080i*, 720p, 576p)
HDMI Output • If the HDTV does not support the selected resolution, the HDTV automatically selects the next lower resolution. • If you select 480p or 576p, the playback menus and Smart Album will not be available when you connect the camera to a TV.

Set a language for the display text. Set the time zone for your location. When you travel to another country, touch Visit, and then touch the appropriate time zone. Set the date and time. Set a date format. (YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, Off*)

USB

Select the mode to use when you connect the camera to a computer or printer with a USB cable. • Computer*: Connect your camera to a computer to transfer files. • Printer: Connect your camera to a printer to print files. • Select Mode: Manually select the USB mode when you connect your camera to a device. Set Intelli-studio to launch automatically when you connect your camera to your computer. (Off, On*)

PC Software

Settings 111

Settings menu

* Default

* Default

Item

Description

Item Auto Rotate

Description

Specify how to name files. • Reset: Set the file number to start from 0001 when you insert a new memory card, format a memory card, or delete all files. • Series*: Set the file number to resume from the previous file number when you insert a new memory card, format a memory card, or delete all files.
• The default name of the first folder is 100PHOTO File No. and the default name of the first file is SAM_0001.

Set to automatically rotate photos as you rotate the camera. (Off, On*) Set to display the date and time on captured photos. (Off*, Date, Date & Time)
• The date and time will be displayed on the

Imprint

bottom right corner of the photo.

• Some printer models may not print the date and time properly.

• If you select Text in Scene mode, the camera will not display the date and time.

• The file number increases one at a time from
SAM_0001 to SAM_9999.

• The folder number increases one at a time from
100PHOTO to 999PHOTO.

Set the camera to automatically turn off when you perform no operations for a specified period. (Off, 1 min, 3 min*, 5 min, 10 min)
• Your settings will not change when you replace Auto Power Off the battery.

• The maximum number of files that can be stored in one folder is 9,999. • The camera defines file names according to the Design rule for Camera File system (DCF) standard. If you intentionally change file names, the camera may not play back the files.

• The camera will not automatically turn off when the camera is connected to a computer or printer, when you are playing a slide show or videos, and when you are recording a voice memo.

Settings 112

Settings menu

* Default

Item AF Lamp

Description

Set a light to automatically turn on in dark places to help the camera focus. (Off, On*) Format the internal memory and the memory card Formatting will delete all files, including protected files. (Yes, No)

Format

Errors can occur if you use a memory card formatted by another brand of camera, a memory card reader, or a computer. Please format memory cards in the camera before using them to capture photos.

Reset Touch Calibration

Reset menus and shooting options except date and time, language, and video output settings. (Yes, No) Calibrate the touch screen so that your camera will properly recognize your inputs.

Settings 113

Appendixes
Get information about error messages, specifications, and maintenance.

Error messages ……………………………………… 115 Camera maintenance ………………………………… 116
Cleaning your camera ……………………………… 116 Using or storing the camera ………………………… 117 About memory cards ……………………………… 118 About the battery …………………………………… 120

Before contacting a service center ………………… 124 Camera specifications ……………………………… 127 Glossary ……………………………………………… 131 FCC notice …………………………………………… 136 Index …………………………………………………… 137

Error messages
When the following error messages appear, try these remedies.
Error message Suggested remedies • Turn off your camera, and then turn it on

again.
Card Error • Remove your memory card, and then insert

it again.
• Format your memory card. Card not supported.

The inserted memory card is not supported by your camera. Insert a microSD or microSDHC memory card. File names do not match the DCF standard. Transfer the files on the memory card to your computer, and then format the card. Delete the damaged file or contact a service center. Your camera does not support the FAT file structure of the inserted memory card. Format the memory card on the camera. Insert a charged battery or recharge the battery. Delete unnecessary files or insert a new memory card. Capture photos or insert a memory card that contains some photos.

DCF Full Error

File Error File system not supported. Low Battery Memory Full No Image File

Appendixes 115

Camera maintenance
Cleaning your camera
Camera lens and touch screen
Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe gently.

Camera body
Wipe gently with a soft, dry cloth.

• Never use benzene, thinners, or alcohol to clean the camera. These solutions can damage the camera or cause it to malfunction.

• Do not press on the lens cover or use a blower brush on the lens cover. Appendixes 116

Camera maintenance

Using or storing the camera
Inappropriate places to use or store the camera
• Avoid exposing the camera to very cold or very hot

Using on beaches or shores
• Protect your camera from sand and dirt when you use it on

beaches or in other similar areas.
• Your camera is not waterproof. Do not handle the battery,

temperatures.
• Avoid using your camera in areas with extremely high humidity,

adapter, or memory card with wet hands. Operating the camera with wet hands may cause damage to your camera.

or where the humidity changes drastically.
• Avoid exposing the camera to direct sunlight and storing it in hot,

poorly-ventilated areas, such as in a car during summertime.
• Protect your camera and the display from impact, rough

Storing for extended period of time
• When you store the camera for an extended period, place it in a

handling, and excessive vibration to avoid serious damage. • Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated areas to prevent damage to moving parts and internal components. • Do not use your camera near fuels, combustibles, or flammable chemicals. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the camera or its accessories. • Do not store the camera where there are mothballs.

sealed container with an absorbent material, such as silica gel.
• Remove the batteries from your camera when storing it for an

extended period. Installed batteries may leak or corrode over time and cause serious damage to your camera. • Over time, unused batteries will discharge and must be recharged before use.

Use the camera with caution in humid environments
When you transfer the camera from a cold environment to a warm one, condensation can form on the lens or internal components of the camera. In this situation, turn off the camera and wait for at least 1 hour. If condensation forms on the memory card, remove the memory card from the camera and wait until all moisture has evaporated before reinserting it.

Appendixes 117

Camera maintenance
Other cautions
• Do not swing your camera by the strap. This may cause injury • • • • • Paint or metal on the outside of the camera may cause

• • •

• •

to yourself or others or damage to your camera. Do not paint your camera, as paint can clog moving parts and prevent proper operation. Turn off the camera while not in use. Your camera consists of delicate parts. Avoid impacts to the camera. Protect the display from external force by keeping it in the case when not in use. Protect the camera from scratches by keeping it away from sand, sharp implements, or loose change. Do not expose the lens to direct sunlight, as this may discolor the image sensor or cause it to malfunction. Protect your lens from fingerprints and scratches. Clean your lens with a soft, clean, debris-free lens cloth. The camera may turn off if subjected to a sudden impact. This is to protect the memory card. Turn on the camera to use it again. While you use the camera, it may heat up. This is normal and should not affect your camera’s lifespan or performance. When you use the camera in low temperatures, it may take some time to turn on, the screen color may be changed temporarily, or after-images may appear. These conditions are not malfunctions and they will correct themselves when the camera is returned to normal temperatures.

allergies, itchy skin, eczema, or swelling for people with sensitive skin. If you experience any of these symptoms, stop using the camera immediately and consult a doctor. • Do not insert foreign objects into any of your camera’s compartments, slots, or access points. Damage due to improper use may not be covered by your warranty. • Do not allow unqualified personnel to service the camera or attempt to service the camera yourself. Any damage that results from unqualified service is not covered by your warranty.

About memory cards
Supported memory cards
Your camera supports microSD (Secure Digital) or microSDHC (Secure Digital High Capacity) memory cards. To read data with a PC or memory card reader, insert the memory card into a memory card adapter.

Appendixes 118

Camera maintenance
Memory card capacity
The memory capacity may vary depending on the scenes you shoot and the shooting conditions. The capacities below are based on a a 1 GB microSD card:
Size Super Fine Fine Normal 30 FPS 15 FPS

Cautions when using memory cards
• Insert a memory card in the correct direction. Inserting a



105 117
P h o t o s

206 230 275 323 607 954 1,336 2,505 -

303 337 406 469 858 1,336 1,878 3,006 -

Approx. 13' 08" Approx. 14' 55" Approx. 34' 55" Approx. 134' 34"

Approx. 22' 57" Approx. 25' 54" Approx. 65' 40" Approx. 231' 14"
• • • • • • •

140 166 319 522 742 1,582 -

* V i d e o s

-



* Available recording time may vary if you use the zoom. Several videos were recorded in succession to determine the total recording time.

memory card in the wrong direction may damage your camera and memory card. Do not use memory cards that have been formatted by other cameras or by a computer. Reformat the memory card with your camera. Turn off the camera when you insert or remove the memory card. Do not remove the memory card or turn off your camera while the lamp is blinking, as this may damage your data. When the lifespan of a memory card has expired, you cannot store any more photos on the card. Use a new memory card. Do not bend, drop, or subject memory cards to heavy impact or pressure. Avoid using or storing memory cards near strong magnetic fields. Avoid using or keeping memory cards in areas with high temperature, high humidity, or corrosive substances. Prevent memory cards from making contact with liquids, dirt, or foreign substances. If dirty, wipe the memory card clean with a soft cloth before you insert the memory card in your camera. Do not allow liquids, dirt, or foreign substances to come in contact with memory cards or the memory card slot. Doing so may cause memory cards or the camera to malfunction.

Appendixes 119

Camera maintenance
• When you carry a memory card, use a case to protect the card

Battery life
Average shooting time / Number of photos Test conditions and procedures (when the battery is fully charged)

from electrostatic discharges. • Transfer important data to other media, such as a hard disk, CD, or DVD. • When you use the camera for an extended period, the memory card may become warm. This is normal and does not indicate a malfunction.
The manufacturer is not responsible for any loss of data.

This is measured under the following conditions: in Program mode, in the darkness, at resolution, with OIS off, Fine quality.
Procedure:

Approximately 95 min/ Photos Approximately 190 photos

1. Set the flash option to Fill in, take a single shot, and zoom in or out. 2. Set the flash option to Off, take a single shot, and zoom in or out. 3. Perform steps 1 and 2 for 30 seconds and repeat for 5 minutes. Then turn off the camera for 1 minute. 4. Repeat steps 1 to 3.

About the battery
Use only Samsung-approved batteries.

Battery specifications
Specification Model Type Cell capacity Voltage Charging time* (when the camera is switched off) Description Videos

BP70A Lithium-ion battery 740 mAh (min. 700 mAh) 3.7 V Approximately 150 min

Approximately 70 min

Record videos at 1280 X 720 HQ resolution and 30 FPS.

• The figures above are measured using Samsung’s standards. Your reslults may vary, depending on your actual usage

• Several videos were recorded in succession to determine the total recording time. * Charging the battery by connecting it to a computer may take longer.

Appendixes 120

Camera maintenance
Low battery message
When the battery has fully discharged, the battery icon will turn red and the "Low Battery" message will appear.

Cautions about using the battery
Protect batteries, chargers, and memory cards from damage Prevent batteries from making contact with metal objects. Contact can create a connection between the + and – terminals of your battery and lead to temporary or permanent battery damage and may cause a fire or electric shock.

Notes about using the battery
• Avoid exposing batteries or memory cards to very cold or very



• • •

hot temperatures (below 0 ºC/32 ºF or above 40 ºC/104 ºF). Extreme temperatures can reduce the charging capacity of your batteries and can cause memory cards to malfunction. When you use the camera for an extended period, the area around the battery chamber may become warm. This does not affect the normal use of the camera. Do not pull the power supply cord to disconnect the plug from the power outlet, as this may cause a fire or electric shock. In temperatures below 0 ºC/32 ºF, battery capacity and battery life may decrease. Battery capacity may decrease in low temperatures but will return to normal in milder temperatures.

Notes about charging the battery
• If the indicator light is off, make sure that the battery is inserted

correctly.
• If the camera is on while the battery is charging, the battery

• • • •

may not fully charge. Turn off the camera before charging the battery. Do not use your camera when you are charging the battery. This may cause a fire or electric shock. Do not pull the power supply cord to disconnect the plug from the power outlet. This may cause a fire or electric shock. Let the battery charge for at least 10 minutes before turning on the camera again. If you connect the camera to an external power source when the battery is depleted, using some high energy-consuming functions will cause the camera to turn off. To use the camera normally, recharge the battery.

Appendixes 121

Camera maintenance
• Using the flash or recording videos depletes the battery quickly. • •

Handle and dispose of batteries and chargers with care
• Never dispose of batteries in a fire. Follow all local regulations

• •

Charge the battery until the indicator light turns green. If the indicator light blinks in orange or does not illuminate, reconnect the cable, or remove the battery and insert it again. If you charge the battery when the cable is overheated or the temperature is too high, the indicator light may turn orange. Charging will start when the battery cools down. Overcharging batteries may shorten battery life. After charging is finished, disconnect the cable from your camera. Do not bend or place heavy objects on the AC cable. Doing so may damage the cable.

when you dispose of used batteries.
• Never place batteries or cameras on or in heating devices,

such as microwave ovens, stoves, or radiators. Batteries may explode when they are overheated.

Notes about charging with a computer connected
• Use only the provided USB cable. • The battery may not charge when: - you use a USB hub - other USB devices are connected to your computer - you connect the cable to the port on the front side of your

computer
- the USB port of your computer does not support the power output

standard (5 V, 500 mA)

Appendixes 122

Camera maintenance

Personal injury or death can occur if the battery is handled carelessly or improperly. For your safety, follow these instructions for proper battery handling: • The battery can ignite or explode if not handled properly. If you notice any deformities, cracks, or other abnormalities in the battery, immediately discontinue use of the battery and contact a service center. • Use only authentic, manufacturer-recommend battery chargers and adapters and charge the battery only by the methods described in this user manual. • Do not place the battery near heating devices or expose it to excessively warm environments, such as the inside of an enclosed car in the summertime. • Do not place the battery in a microwave oven. • Avoid storing or using the battery in hot, humid places, such as spas or shower enclosures. • Do not rest the device on flammable surfaces, such as bedding, carpets, or electric blankets for a prolonged period. • When the device is switched on, do not leave it in any confined space for a prolonged period. • Do not allow battery terminals to come in contact with metallic objects, such as necklaces, coins, keys, or watches. • Use only authentic, manufacturer-recommended, Lithiumion replacement batteries.

• Do not disassemble the battery or puncture it with any

sharp object.
• Avoid exposing the battery to high pressure or crushing

forces.
• Avoid exposing the battery to major impacts, such as

dropping it from high places.
• Do not expose the battery to temperatures of 60 °C

(140 °F) or above.
• Do not allow the battery to come in contact with moisture •

or liquids. Do not expose the battery to sources of excessive heat such as direct sunshine, fire or the like.

Disposal guidelines • Dispose of the battery with care. • Do not dispose of the battery in a fire. • Disposal regulations may differ by country or region. Dispose of the battery in accordance with all local and federal regulations. Guidelines for charging the battery Charge the battery only by the method described in this user manual. The battery can ignite or explode if not charged properly.

Appendixes 123

Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted the suggested remedy and are still having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.

Situation Cannot turn on the camera

Suggested remedies • Ensure that the battery is inserted. • Ensure that the battery is inserted

Situation

Suggested remedies • There is no space on the memory card.

correctly. (p. 16) • Charge the battery.
• Charge the battery. • Your camera may be in Power save Cannot capture photos

• • • • • The camera freezes The camera heats up The flash does not work

The power turns off suddenly

mode. (p. 112)
• The camera may turn off to prevent the

memory card from being damaged due to an impact. Turn on your camera again.
• The battery may lose power more quickly

Delete unnecessary files or insert a new card. Format the memory card. The memory card is defective. Get a new memory card. Make sure that the camera is switched on. Charge the battery. Make sure that the battery is inserted correctly.

The camera is losing battery power quickly

in low temperatures (below 0 °C/32 ºF). Keep the battery warm by putting it into your pocket. • Using the flash or recording videos depletes the battery quickly. Recharge if needed. • Batteries are consumable parts that must be replaced over time. Get a new battery if the battery life is diminishing quickly.

Remove the battery and insert it again. While you use the camera, it may heat up. This is normal and should not affect your camera’s lifespan or performance.
• The flash option may be set to off. (p. 55) • You cannot use the flash in some modes.

Appendixes 124

Before contacting a service center

Situation The flash fires unexpectedly The date and time are incorrect The touch screen or buttons do not work

Suggested remedies

Situation

Suggested remedies • Make sure that the focus option you set

The flash may fire due to static electricity. The camera is not malfunctioning. Set the date and time in the display settings. (p. 111) Remove the battery and insert it again. If you use your camera at very low temperatures, it may cause the camera screen to malfunction or discolor. For better performance of your camera screen, use your camera in moderate temperatures.
• Turn off your camera and then turn it on The photo is blurry

is suitable for close-up shots. (p. 58)
• Make sure that the lens is clean. If not,

clean the lens. (p. 116)
• Make sure that the subject is within range

of the flash. (p. 127) An incorrect White Balance can create The colors in the photo unrealistic color. Select the proper White do not match the actual Balance option to suit the light source. scene (p. 69) Your photo is overexposed. • Turn off the flash. (p. 55) • Adjust the ISO sensitivity. (p. 57) • Adjust the exposure value. (p. 67) Your photo is underexposed. • Turn on the flash. (p. 55) • Adjust the ISO sensitivity. (p. 57) • Adjust the exposure value. (p. 67)

The camera screen responds poorly

again.
The memory card has an error • Remove your memory card and insert

The photo is too bright

it again.
• Format your memory card.

See “Cautions when using memory cards” for more detail. (p. 119) If you change the name of a file, your camera may not play the file (the name of the file should meet the DCF standard). If you encounter this situation, play back the files on your computer.

The photo is too dark

Cannot play back files

Appendixes 125

Before contacting a service center

Situation The TV does not display your photos

Suggested remedies • Make sure that the camera is correctly

Situation

Suggested remedies • End Intelli-studio and restart the program. • You cannot use Intelli-studio on

connected to the TV with the A/V cable.
• Make sure that your memory card

Macintosh computers.
• Make sure that PC Software is turned Intelli-studio is not functioning properly

contains photos.
• Make sure that the USB cable is Your computer does not recognize your camera

on in the settings menu. (p. 111)
• Depending on your computer's

connected correctly. • Make sure that your camera is switched on. • Make sure that you are using a supported operating system. The file transmission may be interrupted by static electricity. Disconnect the USB cable and connect it again. Videos may not play on some video player programs. To play video files captured with your camera, install and use the Intelli-studio program on your computer. (p. 100)

Your computer disconnects the camera while transferring files Your computer cannot play videos

specifications and environment, the program may not launch automatically. If this occurs, click Start My Computer Intelli-studio iStudio.exe on your computer.

Appendixes 126

Camera specifications
Image sensor Type Effective pixels Total pixels Lens Focal length F-stop range Samsung Lens f = 4.7 mm-23.5 mm (35 mm film equivalent: 26 mm-130 mm) F3.3 (W)-F5.9 (T) • Still image mode: 1.0X-5.0X (Optical zoom x Digital zoom: 25.0X) • Playback mode: 1.0X-14.4X Shutter speed • Smart Auto: 1/8-1/2,000 sec. • Program: 1-1/2,000 sec. • Night Shot: 8-1/2,000 sec. Exposure TFT LCD 3.0" (7.6 cm) Wide 230 K Full Touch Screen Panel Control Metering Compensation ISO equivalent Program AE Multi, Spot, Center-weighted, Face Detection ±2EV (1/3 EV Step) Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200 1/2.3" (Approximately 7.76 mm) CCD Approximately 16.2 mega-pixels Approximately 16.4 mega-pixels Range
Normal (AF) Macro Auto Macro

Focusing Type TTL auto focus (Multi AF, Center AF, Smart Face Recognition AF, Face Detection AF, Smart Touch AF, One Touch Shooting AF)
Wide (W) 80 cm-infinity 5 cm-80 cm 5 cm-infinity Tele (T) 1.5 m-infinity 1 m-1.5 m 1 m-infinity

Digital zoom Display Type Feature

Appendixes 127

Camera specifications

Flash Mode Range Recharging time Shake reduction DUAL IS [Optical Image Stabilization (OIS) + Digital Image Stabilization (DIS)] Effect • Photo Filter (Smart Filter): Normal, Miniature, Vignetting, Soft Focus, Old Film 1, Old Film 2, Half Tone Dot, Sketch, Fish-eye, Defog, Classic, Retro, Negative, (Custom RGB) • Image Adjust: Sharpness, Contrast, Saturation • Palette Effect: Palette Effect 1, Palette Effect 2, Palette Effect 3, Palette Effect 4 • Movie Filter (Smart Filter): Normal, Miniature, Vignetting, Half Tone Dot, Sketch, Fish-eye, Defog, Classic, Retro, Negative, (Custom RGB) Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix • Wide: 0.2 m-3.0 m (ISO Auto) • Tele: 1.0 m-1.8 m (ISO Auto) Approximately 4 sec.

White Balance Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Set Date Imprinting Date & Time, Date, Off Shooting • Modes: Smart Auto*, Program, Scene*, Simple Shot, Magic Frame shot, Beauty Shot, Object Highlight, Night Shot, Close Up, Vignetting, Photo Filter, DUAL IS * Smart Auto: Macro, Macro text, Portrait, White, Landscape, Action, Tripod, Night, Night Portrait, Backlight, Backlight Portrait, Blue Sky, Sunset, Macro Color, Natural Green, Fireworks * Scene: Landscape, Text, Sunset, Dawn, Backlight, Beach & Snow • Drive: Single, Continuous, Motion Capture, AEB • Timer: 2 Sec, 10 Sec, Double

Photo Shooting mode

Photos

Video Shooting mode

Appendixes 128

Camera specifications

Videos

• Modes: Movie, Smart Movie*, Vignetting, Movie Filter, Palette Effect * Smart Movie: Landscape, Blue Sky, Natural Green, Sunset • Format: MP4 (H.264) (Maximum recording time: 20 min) • Size: 1280 X 720 HQ, 1280 X 720, 640 X 480, 320 X 240 • Frame rate: 30 FPS, 15 FPS • Voice: Mute, Sound Alive On, Sound Alive Off • OIS: On, Off • Video editing (embedded): Pause during recording, Still image capture, Time trimming

Voice recording • Voice Recording (Maximum 10 hours) • Voice Memo in a photo (Maximum 10 sec.) Storage • Internal memory: Approximately 10 MB • External memory (Optional): microSD card (up to 2 GB guaranteed), microSDHC card (up to 8 GB guaranteed) Internal memory capacity may not match these specifications. • DCF, EXIF 2.21, DPOF 1.1, PictBridge 1.0 • Still Image: JPEG (DCF) • Movie Clip: MP4 (Video: MPEG-4.AVC/H.264, Audio: AAC) • Audio file: WAV

Media

Playback Single image, Thumbnails, Multi-slide show with music and effect, Movie clip, Smart Album*, 3D Album, Magazine * Smart Album category: Type, Date, Face Resize, Rotate, Image Adjust, Trim, Smart Crop, Smart Filter • Image Adjust: Face Retouch, Brightness, Saturation, Contrast, Red-eye Fix, ACB • Smart Filter: Normal, Miniature, Vignetting, Soft Focus, Old Film 1, Old Film 2, Half Tone Dot, Sketch, Fish-eye, Defog, Classic, Retro, Negative, Custom RGB

File format

Type

Edit

Effect

Appendixes 129

Camera specifications

For 1 GB microSD: Number of photos
Super Fine 4608 X 3456 4608 X 3072 4608 X 2592 3648 X 2736 105 117 140 166 319 522 742 1,582 Fine 206 230 275 323 607 954 1,336 2,505 Normal 303 337 406 469 858 1,336 1,878 3,006

Power source Rechargeable battery Lithium-ion battery (BP70A, 740 mAh: Min 700 mAh)

The power source may differ depending on your region. Dimensions (W X H X D) 102.3 X 56.5 X 19.3 mm (without protrusions) Weight 126.5 g / 4.46 oz (without battery and memory card) Operating Temperature 0-40 °C / 32-104° F Operating Humidity 5-85 % Software

Image size

2592 X 1944 1984 X 1488 1920 X 1080 1024 X 768

These figures are measured under Samsung’s standard conditions. Your results may vary depending on the shooting conditions and camera settings. Interface Digital output connector USB 2.0

Intelli-studio
Specifications may change without notice to improve performance.

Audio input/output Internal speaker (Mono), Microphone (Mono) Video output DC power input connector • A/V: NTSC, PAL (selectable) • HDMI 1.4: NTSC, PAL (selectable) 20 pin, 4.2 V

Appendixes 130

Glossary
ACB (Auto Contrast Balance) This feature automatically improves the contrast of your images when the subject is backlit or when there is a high contrast between your subject and the background. AEB (Auto Exposure Bracket) This feature automatically captures several images at different exposures to help you capture a properly-exposed image. AF (Auto Focus) A system that automatically focuses the camera lens on the subject. Your camera uses the contrast to focus automatically. Aperture The aperture controls the amount of light that reaches the camera’s sensor. Camera shake (Blur) If the camera is moved while the shutter is open, the entire image may appear blurred. This occurs more often when the shutter speed is slow. Prevent camera shake by raising the sensitivity, using the flash, or using a faster shutter speed. Alternately, use a tripod, the DIS or OIS function to stabilize the camera. Composition Composition in photography means arranging objects in a photo. Usually, abiding by the rule of thirds leads to a good composition. DCF (Design rule for Camera File system) A specification to define a file format and file system for digital cameras created by the Japan Electronics and Information Technology Industries Association (JEITA). Depth of field The distance between the nearest and farthest points that can be acceptably focused in a photograph. Depth of field varies with lens aperture, focal length, and distance from the camera to the subject. Selecting a smaller aperture, for example, will increase the depth of field and blur the background of a composition. Digital zoom A feature that artificially increases the amount of zoom available with a zoom lens (Optical zoom). When using the Digital zoom, the image quality will deteriorate as the magnification increases. DPOF (Digital Print Order Format) A format for writing printing information, such as selected images and number of prints, on a memory card. DPOF-compatible printers, sometimes available at photo shops, can read the information from the card for convenient printing.

Appendixes 131

Glossary
EV (Exposure Value) All the combinations of the camera’s shutter speed and lens aperture that result in the same exposure. EV Compensation This feature allows you to quickly adjust the exposure value measured by the camera, in limited increments, to improve the exposure of your photos. Set the EV compensation to -1.0 EV to adjust the value one step darker and 1.0 EV to one step brighter. Exif (Exchangeable Image File Format) A specification to define an image file format for digital cameras created by the Japan Electronic Industries Development Association (JEIDA). Exposure The amount of light allowed to reach the camera’s sensor. Exposure is controlled by a combination of the shutter speed, the aperture value, and ISO sensitivity. Flash A speed light that helps to create adequate exposure in low-light conditions. Focal length The distance from the middle of the lens to its focal point (in millimeters). Longer focal lengths result in narrower angles of view and the subject is magnified. Shorter focal lengths result in wider angles of view. Histogram A graphical representation of the brightness of an image. The horizontal axis represents the brightness and the vertical axis represents the number of pixels. High points at the left (too dark) and right (too bright) on the histogram indicate a photo that is improperly exposed. H.264/MPEG-4 A high-compression video format established by international standard organizations ISO-IEC and ITU-T. This codec is capable of providing good video quality at low bit rates developed by the Joint Video Team (JVT). Image sensor The physical part of a digital camera that contains a photosite for each pixel in the image. Each photosite records the brightness of the light that strikes it during an exposure. Common sensor types are CCD (Charge-coupled Device) and CMOS (Complementary Metal Oxide Semiconductor).

Appendixes 132

Glossary
ISO sensitivity The sensitivity of the camera to light, based on the equivalent film speed used in a film camera. At higher ISO sensitivity settings, the camera uses a higher shutter speed, which can reduce blur caused by camera shake and low light. However, images with high sensitivity are more susceptible to noise. JPEG (Joint Photographic Experts Group) A lossy method of compression for digital images. JPEG images are compressed to reduce their overall file size with minimal deterioration of the image resolution. LCD (Liquid Crystal Display) A visual display commonly used in consumer electronics. This display needs a separate backlight, such as CCFL or LED, to reproduce colors. Macro This feature allows you to capture close-up photos of very small objects. When using the macro feature, the camera can maintain a sharp focus on small objects at a near life-size ratio (1:1). Metering The metering refers to the way in which the camera measures the quantity of light to set the exposure. MJPEG (Motion JPEG) A video format which is compressed as a JPEG image. Noise Misinterpreted pixels in a digital image that may appear as misplaced or random, bright pixels. Noise usually occurs when photos are shot with a high sensitivity or when a sensitivity is automatically set in a dark place. Optical zoom This is a general zoom which can enlarge images with a lens and does not deteriorate quality of images. Quality An expression of the rate of compression used in a digital image. Higher quality images have a lower rate of compression, which usually results in a larger file size. Resolution The number of pixels present in a digital image. High resolution images contain more pixels and typically show more detail than low resolution images.

Appendixes 133

Glossary
Shutter speed Shutter speed refers to the amount of time it takes to open and close the shutter, and it is an important factor in the brightness of a photo, as it controls the amount of light which passes through the aperture before it reaches the image sensor. A fast shutter speed allows less time to let light in and the photo becomes darker and more easily freezes subjects in motion. Vignetting A reduction of an image’s brightness or saturation at the periphery (outer edges) compared to the center of the image. Vignetting can draw interest to subjects positioned in the center of an image. White balance (color balance) An adjustment of the intensities of colors (typically the primary colors red, green, and blue), in an image. The goal of adjusting the white balance, or color balance, is to correctly render the colors in an image.

Appendixes 134

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

This Class [B] digital apparatus complies with Canadian ICES-003. PlanetFirst represents Samsung Electronics' commitment to sustainable development and social responsibility through eco-driven business and management activities.

Appendixes 135

FCC notice
• NOTE: • Declaration of Conformity

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorientate, or relocate, the receiving antenna. - Increase the distance between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help.

Trade Name Model No. Responsible Party Address Telephone No.

: Samsung Electronics America, Inc. : Samsung ST6500 : Samsung Electronics America, Inc. : 85 Challenger Road, Ridgefield Park, NJ 07660 : 1-800-SAMSUNG (726-7864)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• CAUTION:

Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

Appendixes 136

Index
A
AF-assist light location 14 settings 113

B
Battery
caution 121 charging 17 inserting 16

C
Camera maintenance 116 Camera specifications 127 Charging 17 Cleaning camera body 116 lens 116 touch screen 116

D
Date/Time set 111 Deleting files 86 DIgital Print Order Format (DPOF) 96 Digital zoom 27 Disconnecting the camera 103 Display brightness 110 Display set 23 DUAL IS mode 35

AF Lamp 113 AF Sound 109 Anynet+ 110 Aperture value 37 Auto Contrast Balance (ACB)
Playback mode 95 Shooting mode 67

Beauty Shot mode 37 Blink detection 64 Brightness
Playback mode 94 Shooting mode 67

Close up shot
Close up mode 36 macro 58

Burst modes
Auto Exposure Bracket 71 Continuous 71 Motion Capture 71

Auto Exposure Bracket (AEB) 71 A/V port 14

Connecting to a computer
Mac 104 Windows 99

E
Editing photos 92 Editing videos capturing 90 trimming 90

Contrast
Playback mode 94 Shooting mode 75

Enlarging 87 Error messages 115

Appendixes 137

Index

F
Face detection 62 Flash
Auto 55 Fill in 56 Off 55 Red-eye 56 Red-eye fix 56 Slow sync 56

H
Half-press shutter 30 HDMI Output 111 HDTV 98 Home button 15 Home screen 24

Image quality 52 Imprint 112 Intelli-studio 101 Intelli zoom 28 ISO sensitivity 57

Motion capture 71 Motion recognition 81 Movie Filter mode 45 My star ranking 82 registering 65

L I
Icons
Home screen 24 Playback mode 82 Shooting mode 20

N
Night Shot mode 37

Focus area
Center AF 61 Multi AF 61 One touch shooting 61 Smart Touch AF 61

Language settings 111 Learning icons 20

O M
Macro 58 Magic Frame Shot mode 43 Memory card caution 119 Insert 16

Object Highlight mode 42 One touch shooting 60 Optical Image Stabilization (OIS) 29 Optional accessories 13

Focus sound 109 Formatting 113

Image adjustment brightness Playback mode 94 Shooting mode 67

G
Guide lines 109

contrast
Playback mode 94 Shooting mode 75

red-eye 96 saturation
Playback mode 94 Shooting mode 75

Metering
Center-weighted 69 Multi 69 Spot 69

sharpness 75
Appendixes 138

Index

P
Palette Effect mode 47 Photo Filter mode 43 PictBridge 105 Playback button 15 Playback mode 80 Power button 14 Power save mode 110 Printing photos 105 Program mode 38 Protecting files 86

R
Red-eye
Playback mode 96 Shooting mode 55

Sharpness 75 Shooting portraits
Beauty Shot mode 37 Blink detection 64 Face detection 62 Red-eye 56 Red-eye fix 56 Self portrait 63 Smart Face Recognition 64 Smile shot 63

Smile shot 63 Sound settings 23 Start image 92, 109 Status lamp 15

Reset 113 Resolution
Playback mode 92 Shooting mode 51

T
Thumbnails 83 Timer timer lamp 14 Using the timer 54

Retouching faces
Playback mode 95 Shooting mode 37

Shutter button 14 Simple Shot mode 34 Slide show 88 Smart Album 83 Smart Auto mode 33 Smart Crop 93 Smart Face Recognition 64 Smart Filter
Playback mode 94 Shooting mode 72

Rotating 93

Time settings 18, 111 Time zone settings 18, 111 Touch calibration 19, 113 Touch screen 15 Transferring files
Mac 104 Windows 99

S Q
Quick view 110 Saturation
Playback mode 94 Shooting mode 75

Scene mode 36 Self portrait shot 63 Service center 124

Tripod mount 14

Smart Movie mode 40 Settings 108

Appendixes 139

Index

U
Unpacking 13 USB port 14 User buttons 38 Using the touch screen flicking 21 scrolling 21 touching 21

Vignetting mode 46 Voice memo playing 91 recording 48

W
White Balance 69

Z V
Video
playing 89 shooting 39

Zoom using the zoom 27 zoom button 15 zoom sound settings 76

Viewing files page flip effect 84 slide show 88 Smart Album 83 thumbnails 85 TV 97

Appendixes 140

Please refer to the warranty that came with your product or visit our website http://www.samsung.com/ for after-sales service or inquiries.…...

Similar Documents